Thermomechanical Behavior and Modeling Between 350°C and 400°C of Zircaloy-4 Cladding Tubes From an Unirradiated State to High Fluence (0 to 85s˙1024 nm−2,E>1 MeV)
Source abstract
Abstract
This paper first describes the effect of neutron irradiation on the thermomechanical behavior of stress-relieved Zircaloy-4 fuel tubes that have been analyzed after exposure to five different fluences ranging from nonirradiated material to high burnup. In the second part, a viscoplastic model is proposed to simulate, for different isotherms, 350°C1 MeV. The model, identified for tests conducted at 350°C, has been validated from tests made at 380°C and 400°C. The model is capable of simulating strain hardening under internal pressure followed by a stress relaxation period, the loading producing an interaction between the pellet and cladding. Introduction of a state variable characterizing the damage caused by a bombardment with neutrons into the model has allowed us to simulate the irradiation-induced hardening and creep rate decrease, as well as the saturation noticed after two cycles of irradiation ≅45s˙1024 nm−2E>1 MeV in a pressurized water reactor (PWR). Finally, the numerical simulations show the model is able to reproduce the totality of the thermomechanical experiments. [S0094-4289(00)00202-4]
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Nuclear and radioactivity studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Electricite´ de France, Direction des Etudes et Recherches, De´partement MTC Route de Sens, 77250 Moret/Loing, France
Laboratoire de Me´canique Applique´e R. Chale´at, UMR 6604, 24 chemin de l’Epitaphe, 25030 Besanc¸on Cedex, France
References (26)
Show source-provided references
1. Baron, D., and Bouffioux, P., 1989, “Le Crayon Combustible des Re´acteurs a` Eau Pressurise´e de Grande Puissance,” Rapport EDF, HT M2/88-27.
2. Higgy, R., and Hammad, F. H., 1972, “Effect of Neutron Irradiation on the Tensile Properties of Zircaloy-2 and Zircaloy-4,” J. Nucl. Mater., 44, pp. 215–277.10.1016/0022-3115(72)90099-2 ↗
3. Northwood, D. O., 1977, “Irradiation Damage in Zirconium and its Alloys,” AT. Energy Review, p. 154.
4. Franklin, D. G., 1982, “Zircaloy-4 Cladding Deformation During Power Reactor Irradiation,” ASTM-STP 754, pp. 235–267.10.1520/STP37057S ↗
5. Petterson, K., 1982, “An Evaluation of Irradiation Temperature on the Irradiation Hardening of Zircaloy,” Studvik Super-Ramp Project, SR 82/3.
6. Baty, D. L., Pavinick, W. A., Dietrich, M. R., Clevinger, G. S., and Papazoglou, T. P., 1984, “Deformation Characteristics of Cold-Worked and Recrystallized Zircaloy-4 Cladding in Zirconium in the Nuclear Industry,” 6th International Symposium, ASTM-STP, 824, 306–339.10.1520/STP34478S ↗
7. Yasuda, T., Nakatsuka, M., and Yamashita, K., 1987, “Deformation and Fracture Properties of Neutron-Irradiated Recrystallized Zircaloy-2 Cladding Under Uniaxial Tension,” Zirconium in the Nuclear Industry, VIIth Int. ASTM 939, pp. 734–747.10.1520/STP28156S ↗
8. Delobelle, P., Robinet, P., Bouffioux, P., Geyer, P., and Le Pichon, I., 1996, “A Unified Model to Describe the Anisotropic Viscoplastic Behavior of Zircaloy-4 Cladding Tubes,” Zirconium in the Nuclear Industry, 11th International Symposium, ASTM-STP 1295, pp. 373–393.10.1520/STP16181S ↗
9. Delobelle, P., Robinet, P., Geyer, P., and Bouffioux, P., 1996, “A Model to Describe the Anisotropic Viscoplastic Behavior of Zircaloy-4 Tubes,” J. Nucl. Mater., 238, pp. 135–162.10.1016/S0022-3115(96)00450-3 ↗
10. Van Swam, L. F., Knorr, D. B., Pelloux, R. M., and Shewbridge, J. F., 1979, “Relationship between Contractile Strain Ratio R and Texture in Zirconium Alloy Tubing,” Metall. Trans. A, 10, p. 483483.10.1007/BF02697076 ↗
11. Bouffioux. P., 1995, “An Experimental Method to Investigate the Anisotropic Viscoplastic Behavior of Zircaloy Cladding Tubes,” 11th International Symposium, ASTM-STP.
12. Bouffioux, P., 1994, “Etude du Comportement en Plasticite´ des Tubes de Gainage en Zircaloy-4 Sous Sollicitations Biaxe´es,” Report DER-EDF A4/94/012A.
13. CEA, Framatome, and EDF Cooperative program, 1995, Proprietary data.
14. Beauregard, R., Clevinger, G. S., and Murty, K. L., 1977, “Effect of Annealing Temperature on the Mechanical Properties of Zircaloy-4 Cladding,” Proceedings of the SMIRT IV, paper C3/5.
15. Murty, K. L., 1989, “Applications of Crystallographic Textures of Zirconium Alloys in Nuclear Industry,” Zirconium in the Nuclear Industry, VIIIth International Symposium, ASTM-STP 1023, p. 570.10.1520/STP18888S ↗
16. Yi, J. K., Park, H. B., Park, G. S., and Lee, B. W., 1992, “Yielding and Dynamic Strain Aging Behavior of Zircaloy-4 Tube,” J. Nucl. Mater., 189, pp. 353353.10.1016/0022-3115(92)90388-2 ↗
17. Prioul, C., 1995, “Le Vieillissement Dynamique Dans les Alliages de Zirconium: Consequences Sur Les Propriete´s Me´caniques,” SF2M, Journe´e d’Etudes Proprie´te´s-Microstructures-Les Edit, Physique, pp. 25–34.
18. Murty, K. L., Clevinger, G. S., and Papazoglou, T. P., 1977, “Thermal Creep of Zircaloy-4 Cladding,” SMIRT IV, San Francisco, Aug. 15–19, paper C3/4.
19. Matsuo, Y. , 1987, “Thermal Creep of Zircaloy-4 Cladding Under Internal Pressure,” J. Nucl. Sci. Technol., 24, No. 2, pp. 111–119.10.3327/jnst.24.111 ↗
20. Lyashenko, V. S., Bykov, V. N., and Paulinov, L. B., 1959, Fiz. Met. Metalloved, 8, p. 362362.
21. EPRI, B and W, 1983, “Cooperative Program on PWR Fuel Rod Performance,” NP 2848, Project 711-1.
22. Franklin, D. G., Lucas, G. E., and Bement, A. L., 1983, “Creep of Zirconium Alloys in Nuclear Reactors,” ASTM STP 815, p. 35.10.1520/STP815-EB ↗
23. Huang, P., Mahmood, T., and Adamson, R., 1996, “Effects of Thermomechanical Processing on In-Reactor Corrosion and Post-Irradiation Mechanical Properties of Zircaloy-2,” 11th International Symposium, ASTM-STP 1295, pp. 726–755.10.1520/STP16199S ↗
24. Pilvin, P., 1988, “Identification Des Parametres de Mode`les de Comportement,” Proceedings of Me`camat, International Seminar on Inelastic Behavior of Solids, Models and Utilization, pp. 155–164.
25. Limba¨ck, M., and Anderson, T., 1996, “A Model for Analysis of the Effect of Final Annealing on the in- and out-of- Reactor Creep Behavior of Zircaloy Cladding,” ASTM-STP 1295, pp. 448–468.10.1520/STP16185S ↗
26. Matzke, H. , 1993, “Radiation Damage in Nuclear Fuel Materials,” Solid State Phenomena,30–31, pp. 355–366.10.4028/www.scientific.net/SSP.30-31.355 ↗