journal article·2017-10-01

Preparation and Distribution Analysis of Thermal Barrier Coatings Deposited on Multiple Vanes by Plasma Spray-Physical Vapor Deposition Technology

J. Mao, M. Liu, C. G. Deng, C. M. Deng, K. S. Zhou, Z. Q. Deng

Publisher page

Abstract

The multicomponent NiCoCrAlTaY coating as bond layer as well as the zirconia stabilized by yttrium oxide (YSZ) coating as top ceramic layer was deposited on duplex vane surface by plasma spray-physical vapor deposition (PS-PVD) system. The thickness and microstructure of thermal barrier coatings (TBCs) under the influence of duplex vane geometry were presented in this article. It has been proven that the entire surface of duplex vane was covered by NiCoCrAlTaY and YSZ coatings. The position with thickest coating was found close to the leading edge and trailing edge of the vane. In those places, the coating was approximately 80–100% thicker than in the other areas on duplex vane. The obtained results indicate that it is possible to manufacture the TBCs including metallic bond layer and top ceramic layer by PS-PVD process on multiple vanes for gas turbines.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Guangdong Institute of New Materials, National Engineering Laboratory for Modern Materials Surface Engineering Technology, The Key Lab of Guangdong for Modern Surface Engineering Technology, Guangzhou 510651, China e-mail:

Guangdong Institute of New Materials, National Engineering Laboratory for Modern Materials Surface Engineering Technology, The Key Lab of Guangdong for Modern Surface Engineering Technology, Guangzhou 510651, China

References (14)

Show source-provided references
1. Dorier, J. L., Gindrat, M., Hollenstein, C., Loch, M., Refke, A., Salito, A., and Barbezat, G., 2001, “Plasma Jet Properties in a New Spraying Process at Low Pressure for Large Area Thin Film Deposition,” International Thermal Spray Conference (ITSC), Singapore, May 28–30, pp. 759–764.http://www.iaea.org/inis/collection/NCLCollectionStore/_Public/32/022/32022029.pdf10.31399/asm.cp.itsc2001p0759 ↗
2. Characteristics of Ceramic Coatings Made by Thin Film Low Pressure Plasma Spraying (LPPS-TF)10.1007/s11666-012-9748-z ↗
3. Vapor Phase Deposition Using Plasma Spray-PVD™10.1007/s11666-009-9428-9 ↗
4. Plasma Spray-PVD: A New Thermal Spray Process to Deposit Out of the Vapor Phase10.1007/s11666-011-9654-9 ↗
5. Improved Thermal Cycling Durability of Thermal Barrier Coatings Manufactured by PS-PVD10.1007/s11666-013-9971-2 ↗
6. Refke, A., Gindrat, M., and von Niessen, K., 2007, “LPPS Thin Film: A Hybrid Coating Technology Between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications,” International Thermal Spray Conference and Exhibition (ITSC), Beijing, China, May 14–17, pp. 705–710.10.31399/asm.cp.itsc2007p0705 ↗
7. Processing and Design Methodologies for Advanced and Novel Thermal Barrier Coatings for Engineering Applications10.1016/j.partic.2016.01.007 ↗
8. Advanced Materials and Protective Coatings in Aero-Engines Application
9. Architecture of Thermal Barrier Coatings Produced by Electron Beam-Physical Vapor Deposition (EB-PVD)10.1023/A:1016187101616 ↗
10. Application of Plasma-Sprayed Complex Perovskites as Thermal Barrier Coatings10.1007/s11666-009-9302-9 ↗
11. Influence of Turbine Blade Geometry on Thickness of TBCs Deposited by VPA and PS-PVD Methods
12. Chen, Q. Y., Li, C. J., Li, C. X., Yang, G. J., and Zhao, J. Z., 2014, “A Preliminary Microstructure Investigation of YSZ Coatings Deposited by Plasma Spray—Physical Vapor Deposition Using a Shrouded Plasma Torch,” International Thermal Spray Conference (ITSC), Barcelona, Spain, May 21–23, pp. 268–272.10.31399/asm.cp.itsc2014p0268 ↗
13. Microstructure, Thermal Conductivity and Thermal Cycling Behavior of Thermal Barrier Coatings Prepared by Plasma Spray Physical Vapor Deposition10.1016/j.surfcoat.2015.06.033 ↗
14. Microstructure and Oxidation Resistance of NiCoCrAlYTa Coating by Low Pressure Plasma Spraying10.1142/S0218625X09012743 ↗