journal article·2017-10-01Open access

Residual Stress From Cold Expansion of Fastener Holes: Measurement, Eigenstrain, and Process Finite Element Modeling

Renan L. Ribeiro, Michael R. Hill

Abstract

Cold expansion (CX) is a material processing technique that has been widely used in the aircraft industry to enhance fatigue life of structural components containing holes. CX introduces compressive hoop residual stresses that slow crack growth near the hole edge. The objective of this paper is to predict residual stresses arising from cold expansion using two different finite element (FE) approaches, and compare the results to measurement data obtained by the contour method. The paper considers single-hole, double-hole, and triple-hole configurations with three different edge margins. The first FE approach considers process modeling, and includes elastic–plastic behavior, while the second approach is based on the eigenstrain method, and includes only elastic behavior. The results obtained from the FE models are in good agreement with one another, and with measurement data, especially close to the holes, and with respect to the effect of edge margin on the residual stress distributions. The distribution of the residual stress and equivalent plastic strain around the holes is also explored, and the results are discussed in detail. The eigenstrain method was found to be very useful, providing generally accurate predictions of residual stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, University of California, One Shields Avenue, Davis, CA 95616

References (26)

Show source-provided references
1. Three Dimensional Finite Element Analysis of a Split-Sleeve Cold Expansion Process10.1115/1.3120392 ↗
2. Cold Expansion Technology of Connection Holes in Aircraft Structures: A Review and Prospect10.1016/j.cja.2015.05.006 ↗
3. A Literature Survey on the Stability and Significance of Residual Stresses During Fatigue10.1111/j.1460-2695.2007.01102.x ↗
4. Fracture Mechanics Consideration of Residual Stresses Introduced by Coldworking Fastener Holes10.1115/1.3224790 ↗
5. Retardation of Cracks Emanating From Fastener Holes10.1016/0013-7944(74)90025-3 ↗
6. Extending the Fatigue Life of Aircraft Engine Components by Hole Cold Expansion Technology10.1115/1.2906672 ↗
7. An Experimental Study of Fatigue Crack Initiation and Growth From Coldworked Holes10.1016/0013-7944(79)90122-X ↗
8. Experimental Investigation on the Effects of Cold Expansion of Fastener Holes10.1046/j.1460-2695.1998.00430.x ↗
9. The Effect of Cold Expansion on Improving the Fatigue Life of Fastener Holes10.1016/S1350-6307(02)00028-6 ↗
10. Experimental and Analytical Assessment of Fatigue and Crack Propagation in Cold Worked Open Hole Specimens10.1111/ffe.12050 ↗
11. Correlation of One-Dimensional Fatigue Crack Growth at Cold-Expanded Holes Using Linear Fracture Mechanics and Superposition10.1016/j.engfracmech.2011.02.016 ↗
12. The Contour Method10.1002/9781118402832.ch5 ↗
13. 1987
14. Eigenstrain-Based Model for Prediction of Laser Peening Residual Stresses in Arbitrary Three-Dimensional Bodies—Part 1: Model Description10.1243/03093247JSA417 ↗
15. Eigenstrain-Based Model for Prediction of Laser Peening Residual Stresses in Arbitrary Three-Dimensional Bodies—Part 2: Model Verification10.1243/03093247JSA420 ↗
16. Eigenstrain Simulation of Residual Stresses Induced by Laser Shock Processing in a Ti6Al4V Hip Replacement10.1016/j.matdes.2015.04.048 ↗
17. The Influence of Welding Procedure and Plate Geometry on Residual Stresses in Thick Components10.1016/j.ijsolstr.2015.10.001 ↗
18. Multi-Axial Contour Method for Mapping Residual Stresses in Continuously Processed Bodies10.1007/s11340-006-8446-5 ↗
19. Finite Element Analysis of the Residual Stress by Cold Expansion Method Under the Influence of Adjacent Holes10.1016/j.jmatprotec.2004.04.271 ↗
20. Residual Stresses From Cold Working of Aircraft Fastener Holes
21. ABAQUS/Standard, Version 6.11
22. A New Model of Metal Plasticity and Fracture With Pressure and Lode Dependence10.1016/j.ijplas.2007.09.004 ↗
23. Eigenstrain Analysis of Non-Uniformly Shaped Shot-Peened Samples10.1016/j.proeng.2009.06.035 ↗
24. Determination of Flow Stress for Sheet Metal Forming Using the Viscous Pressure Bulge (VPB) Test10.1016/S0924-0136(03)00838-0 ↗
25. Characterization of the Flow Behavior of Deep Drawing Steel Grades in Dependency of the Stress State and Its Impact on FEA10.1007/s12289-009-0506-9 ↗
26. Anisotropic and Pressure-Dependent Plasticity Modeling for Residual Stress Prediction