journal article·2019-04-01

Development of Gradient Concentrated Single-Phase Fine Mg-Zn Particles and Effect on Structure and Mechanical Properties

S. Fida Hassan, O. Siddiqui, M. F. Ahmed, A. I. Al Nawwah

Publisher page

Abstract

In this study, we used powder metallurgy process to develop gradient concentrated single-phase fine magnesium–zinc alloy particles. Fine magnesium particles were initially dry coated with nanometer size zinc particles in homogeneous manner and cold compacted to cylindrical billet. Zinc atoms were diffused in to the magnesium particles during high-temperature sintering process and produced the single-phase gradient solid solution. The gradient concentration of zinc induced gradual grain refinement in the magnesium particles. The powder metallurgy processed gradient concentrated alloy particles showed an excellent level of hardness, strength, ductility, and fracture toughness in their bulk form, which was even much higher when compared with unalloyed magnesium. Despite having gradient solid solution structure, the developed alloy particles showed homogeneous properties in their bulk form.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, P.O. Box 1061, Dhahran 31261, Saudi Arabia e-mails: ;

Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, P.O. Box 1061, Dhahran 31261, Saudi Arabia

Funding

King Fahd University of Petroleum and Minerals

References (43)

Show source-provided references
1. Metallic Functionally Graded Materials: A Specific Class of Advanced Composites10.1016/j.jmst.2013.02.006 ↗
2. Concept and P/M Fabrication of Functionally Gradient Materials10.1016/0272-8842(95)00143-3 ↗
3. Overview of FGM Research in Japan10.1557/S0883769400048867 ↗
4. 2017
5. Performance of W/Cu FGM-Based Plasma Facing Components Under High Heat Load Test10.1016/j.jnucmat.2007.01.184 ↗
6. Processing Techniques for Functionally Graded Materials10.1016/S0921-5093(03)00578-1 ↗
7. Novel Fabrication Method for Functionally Graded Materials Under Centrifugal Force: The Centrifugal Mixed-Powder Method10.3390/ma2042510 ↗
8. Powder-Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material10.4236/msa.2011.212228 ↗
9. Revolutionary Additive Manufacturing: An Overview
10. Fabrication of W–Cu Functionally Graded Material by Spark Plasma Sintering Method10.1016/j.ijrmhm.2013.09.005 ↗
11. Microstructure Analysis of W-Mo-Ti Functionally Graded Materials Fabricated by Co-Sedimentation10.4028/www.scientific.net/KEM.249.299 ↗
12. Design and Fabrication of W-Mo-Ti-TiAl-Al System Functionally Graded Material10.1007/s11661-000-0152-9 ↗
13. Graded Phase Structure in the Surface Layer of NiTi Alloy Processed by Surface Severe Plastic Deformation10.1016/j.scriptamat.2011.02.008 ↗
14. Fabrication of Ti-Mg System Composite With Graded Density at a Low Temperature by SPS Method10.4028/www.scientific.net/KEM.249.291 ↗
15. Properties of Cu-W Functionally Graded Materials Produced by Segregation and Infiltration10.4028/www.scientific.net/MSF.492-493.123 ↗
16. Formation of a Wear-Induced Layer With Nanocrystalline. Structure in Al-Al3Ti Functionally Graded Material10.1016/j.actamat.2008.05.012 ↗
17. In Situ Multi-Layer Functionally Graded Materials by Electromagnetic Separation Method10.1016/j.msea.2004.10.006 ↗
18. Functionally Graded Material Fabricated by a Centrifugal Method From ZK60A Magnesium Alloy10.2320/matertrans.46.944 ↗
19. 2011
20. 1959
21. Magnesium and Its Alloys as Orthopedic Biomaterials: A Review10.1016/j.biomaterials.2005.10.003 ↗
22. Microstructure, Texture and Mechanical Behavior Characterization of Hot Forged Cast ZK60 Magnesium Alloy10.1016/j.jmst.2017.04.004 ↗
23. Microstructure and Mechanical Properties at Elevated Temperature of Mg-Al-Ni Alloys Prepared Through Powder Metallurgy10.1016/j.jmst.2017.02.002 ↗
24. Effect of Calcium Additions on the Creep Behavior of Magnesium Die-Cast Alloy ZA8510.1007/s11661-005-0035-1 ↗
25. Effect of Zn Content on Microstructure, Mechanical Properties and Fracture Behavior of Mg-Mn Alloy
26. Effects of Zn on Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn Alloys10.1016/j.msec.2012.07.042 ↗
27. Precipitation and Hardening in Magnesium Alloys10.1007/s11661-012-1217-2 ↗
28. Microstructure and Mechanical Properties of Nickel Particle Reinforced Magnesium Composite: Impact of Reinforcement Introduction Method10.3139/146.111471 ↗
29. Powder Diffraction File · 1991
30. 2009
31. 2017
32. Effects of Zn Concentration and Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of as-Extruded Mg-Zn Alloys Produced by Powder Metallurgy10.1016/j.jallcom.2016.10.017 ↗
33. Tension–Compression Yield Asymmetry in as-Cast Magnesium Alloy10.1016/j.jallcom.2014.07.164 ↗
34. Strain Hardening Behaviour and the Taylor Factor of Pure Magnesium10.1080/14786430801968611 ↗
35. Application of Texture Simulation to Understanding Mechanical Behavior of Mg and Solid Solution Alloys Containing Li or Y10.1016/S1359-6454(01)00297-X ↗
36. Role of Mechanical Twinning in Tensile Compressive Yield Asymmetry of Die Cast Mg Alloys10.1179/cmq.2005.44.2.155 ↗
37. An Analytical Constitutive Law for Twinning Dominated Flow in Magnesium10.1016/j.scriptamat.2004.11.022 ↗
38. Influence of Grain Size on the Compressive Deformation of Wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗
39. Influence of 10–12 Extension Twinning on the Flow Behavior of AZ31 Mg Alloy10.1016/j.msea.2006.09.069 ↗
40. Microstructure in the Semi-Solid State and Mechanical Properties of AZ80 Magnesium Alloy Reheated From the as-Cast and Extruded States10.1007/s40195-012-0176-3 ↗
41. Microstructures and Mechanical Properties of Mg–Zn–Zr–Dy Wrought Magnesium Alloys10.1007/s12034-013-0469-9 ↗
42. Achieving High Strength and High Ductility in Magnesium Alloys Using Severe Plastic Deformation Combined With Low-Temperature Aging10.1016/j.scriptamat.2009.08.020 ↗
43. Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Integrated Extrusion and Equal Channel Angular Pressing10.1016/j.actamat.2010.09.043 ↗