journal article·1998-07-01

Application of the Taylor Polycrystal Plasticity Model to Complex Deformation Experiments

G. C. Butler, S. Graham, D. L. McDowell, S. R. Stock, V. C. Ferney

Publisher page

Abstract

The extended Taylor assumption of uniform deformation gradient among grains was applied in 3-D polycrystal plasticity simulations for complex loading paths at finite strain for OFHC Cu using the Los Alamos polycrystal plasticity (LApp) code (Kocks et al., 1994). Comparisons of both stress-strain behavior and texture evolution, with and without the inclusion of latent hardening effects, show that the theory overpredicts the rate of development of texture in both torsion and compression. Compression stress-strain behavior was accurately predicted, but the effect of the prestrain, either compressive or torsional, on subsequent nonproportional deformation response was inadequately modeled. Some possible sources of the discrepancies are discussed, including the low order nature of the extended Taylor model for intergranular interactions as compared to self-consistent models, low order formulation of slip system hardening, lack of accounting for formation of dislocation substructure within grains, and the possible role of anisotropic elasticity. Deformation-induced anisotropy and accommodation of intergranular constraint afforded by geometrically necessary dislocation substructure formation is viewed as the key neglected element of the formulation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Nonlocal and gradient elasticity in micro/nano structures · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405

School of Materials, Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405

Universite de Technologie de Troyes, 10010 Troyes, Cedex, France

References (38)

Show source-provided references
1. Anand L. , and KalidindiS. R., 1994, “The Process of Shear Band Formation in Plane Strain Compression of FCC Metals: Effects of Crystallographic Texture,” Mech. Mater., Vol. 17, pp. 223–243.10.1016/0167-6636(94)90062-0 ↗
2. Asaro R. J. , 1983, “Crystal Plasticity,” ASME Journal of Applied Mechanics, Vol. 50, pp. 921–934.10.1115/1.3167205 ↗
3. Asaro R. J. , and NeedlemanA., 1985, “Texture Development and Strain Hardening in Rate Dependent Polycrystals,” Acta Metall, Vol. 33, p. 923923.10.1016/0001-6160(85)90188-9 ↗
4. Bassani J. L. , and WuT. Y., 1991, “Latent Hardening in Single Crystals II. Analytical Characterization and Predictions,” Proc. R. Soc. (London), Series A435, p. 2121.10.1098/rspa.1991.0128 ↗
5. Bay B. , HansenN., HughesD. A., and Kuhlmann-WilsdorfD., 1992, “Evolution of F.C.C. Deformation Structures in Polyslip,” Acta Met. Mater., Vol. 40(2), pp. 205–219.10.1016/0956-7151(92)90296-Q ↗
6. Bronkhorst C. A. , KalidindiS. R., and AnandL., 1992, “Polycrystalline Plasticity and the Evolution of Crystallographic Texture in FCC Metals,” Phil. Trans. Royal Soc. (London), Series A341, pp. 443–477.10.1098/rsta.1992.0111 ↗
7. Fleck N. A. , MullerG. M., AshbyM. F., and HutchinsonJ. W., 1994, “Strain Gradient Plasticity: Theory and Experiment,” Acta Metall, Mater., Vol. 42, No. 2, pp. 475–487.10.1016/0956-7151(94)90502-9 ↗
8. Graham, S. Jr., 1995, “The Stress State Dependence of Finite Inelastic Deformation Behavior of F.C.C. Polycrystalline Materials,” M.S. thesis, Georgia Institute of Technology, Atlanta, GA.
9. Hansen N. , and JensenD. Juul, 1992, “Flow Stress Anisotropy Caused by Geometrically Necessary Boundaries,” Acta Met. Mater., Vol. 40(12), pp. 3265–3275.10.1016/0956-7151(92)90040-L ↗
10. Harren S. , LoweT. C., AsaroR. J., and NeedlemanA., 1989, “Analysis of Large-Strain Shear in Rate-Dependent Face-Centered Cubic Polycrystals: Correlation of Micro- and Macromechanics,” Phil. Trans. Royal Soc. (London), Series 328, pp. 443–500.10.1098/rsta.1989.0048 ↗
11. Havner, K. S., 1973, “An Analytical Model of Large Deformation Effects in Crystalline Aggregates,” Foundations of Plasticity, ed. A. Sawczuk, p. 93.10.1007/978-94-010-2311-5_40 ↗
12. Hill R. , 1972, “On Constitutive Macro-Variables for Heterogeneous Solids at Finite Strain,” Proc. R. Soc (London), Series A326, p. 131131.10.1098/rspa.1972.0001 ↗
13. Horstemeyer, M. F., 1995, “Physically Based Modeling of Deformation-Induced Anisotropy,” Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
14. Hughes, D. A., 1995, “The Evolution of Deformation Microstructures and Local Orientations,” Proc. 16th Ris0 Int. Symp. on Materials Science: Microstructural and Crystallographic Aspects of Recrystallization, N. Hansen et al., eds., Ris0 National Laboratory, Roskilde, Denmark, 63–85.
15. Hughes D. A. , and HansenN., 1991, “Microstructural Evolution in Nickel During Rolling and Torsion,” Mater. Sci. Techn., Vol. 7(6), pp. 544–553.10.1179/026708391790183736 ↗
16. Hughes D. A. , and HansenN., 1995, “High Angle Boundaries and Orientation Distributions at Large Strains,” Scripta Metall. Mater., Vol. 33(2), pp. 315–321.10.1016/0956-716X(95)00143-J ↗
17. Hughes D. A. , LiuQ., ChrzanD. C., and HansenN., 1997, “Scaling of Microstructural Parameters: Misorientations of Deformation Induced Boundaries,” Acta. Mater., Vol. 45(1), pp. 105–112.10.1016/S1359-6454(96)00153-X ↗
18. Iwakuma T. , and Nemat-NasserS., 1984, “Finite Elastic-Plastic Deformation of Polycrystalline Metals,” Proc. R. Soc. (Lond.), Series A394, p. 101101.10.1098/rspa.1984.0071 ↗
19. Juul Jensen D. , and HansenN., 1990, “Flow Stress Anisotropy in Aluminum,” Acta Met. Mater., Vol. 38, pp. 1369–1380.10.1016/0956-7151(90)90105-P ↗
20. Kalidindi, S. R., and L. Anand, 1991, “Towards a Capability for Predicting the Evolution of Crystallographic Texture During Forming of Metals” AMD-Vol. 125, Advances in Finite Deformation Problems in Materials Processing and Structures, N. Chandra and J. N. Reddy, eds., ASME, pp. 3–14.
21. Kalidindi S. R. , BronkhorstC. A., and AnandL., 1992, “Crystallographic Texture Evolution in Bulk Deformation Processing of FCC Metals,” J. Mech. Phys. Solids, Vol. 40(3), pp. 537–569.10.1016/0022-5096(92)80003-9 ↗
22. Kocks U. F. , StoutM. G., and RollettA. D., 1988, “The Influence of Texture on Strain Hardening,” Strength of Metals and Alloys, Vol. 1, pp. 25–34.10.1016/B978-0-08-034804-9.50008-5 ↗
23. Kocks, U. F., J. S. Kallend, H.-R. Wank, A. D. Rollett, and S. I. Wright, 1994, popLA, Preferred Orientation Package-Los Alamos, LANL LA-CC-89-18.
24. Leffers, T., 1992, “A Model for Rolling Deformation with the Grains Subdivided into Cell Blocks,” Proc. 13th Riso Int. Symp. on Materials Science: Modeling of Plastic Deformation and its Engineering Applications, p. 7.
25. Leffers, T., and N. Hansen, 1992, “Texture, Anisotropy, Microstructure, and Models,” Proc. 13th Riso Int. Symp. on Materials Science: Modeling of Plastic Deformation and its Engineering Applications, pp. 57–77.
26. Lindholm U. S. , NagyA., JohnsonG. R., and HoegfeldtJ. M., 1980, “Large Strain, High Strain Rate Testing of Copper,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 102, pp. 376–381.10.1115/1.3224827 ↗
27. Mathur K. K. , and DawsonP. R., 1989, “On Modeling the Development of Crystallographic Texture in Bulk Forming Processes,” Int. J. Plasticity, Vol. 5, p. 6767.10.1016/0749-6419(89)90020-X ↗
28. Molinari A. , CanovaG., and AhziS., 1987, “A Self-Consistent Approach of the Large Deformation Polycrystal Plasticity,” Acta Met., Vol. 35, p. 29832983.10.1016/0001-6160(87)90297-5 ↗
29. Muller D. , LemoineX., and BerveillerM., 1994, “Nonlocal Behavior of Elastoplastic Metals: Theory and Results,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 378–383.10.1115/1.2904301 ↗
30. Nemat-Nasser S. , and ObataM., 1986, “Rate-Dependent, Finite Elasto-Plastic Deformation of Polycrystals,” Proc. R. Soc.(London), Series A407, p. 4545.10.1098/rspa.1986.0101 ↗
31. Pierce D. , AsaroR. J., and NeedlemanA., 1982, “An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals,” Acta Met., Vol. 30, pp. 1087–1119.10.1016/0001-6160(82)90005-0 ↗
32. Rollett, A. D., D. Juul Jensen, and M. G. Stout, 1992, “Modelling the Effect of Microstructure on Yield Anisotropy,” Proc. 13th RisO Int. Symp. on Materials Science, Andersen, S. I., et al., eds., RisO National Laboratory, Roskilde, Denmark, pp. 93–109.
33. Stout, M. G., J. S. Kallend, U. F. Kocks, M. A. Przystupa, and A. D. Rollett, 1988, “Material Dependence of Deformation Texture Development in Various Deformation Modes,” Proc. 8th Int. Conf. on Textures of Materials (ICOTOM 8), J. S. Kallend and G. Gottstein, eds., The Metallurgical Society.
34. Sun, S. S., Adams, B. L., Shet, C., Saigal, S., and King, W., 1997, “A Mesoscale Experimental Study of the Interaction of Grain Boundaries with the Deformation Field,” Proc. Plasticity ’97: The 6th Int. Symp. on Plasticity and Its Current Applications, A. S. Khan, ed., 14–18 July, Juneau, Alaska, pp. 89–90.
35. Taylor G. I. , 1938a, “Plastic Strain in Metals,” J. Inst. Metals, Vol. 62, p. 307307.
36. Taylor, G. I., 1938b, “Analysis of Plastic Strain in a Cubic Crystal,” Stephen Timoshenko 60th Anniversary Volume, J. M. Lessels, ed. p. 218.
37. Wilmanski K. , 1992, “Macroscopic Theory of Evolution of Deformation Textures,” Int. J. Plasticity, Vol. 8, pp. 959–975.10.1016/0749-6419(92)90045-E ↗
38. Wu P. D. , NealeK. W., and Van Der GiessenE., 1996, “Simulation of the Behaviour of FCC Polycrystals During Reversed Torsion,” Int. J. Plasticity, Vol. 12(9), pp. 1199–1219.10.1016/S0749-6419(96)00048-4 ↗