Material Behavior Modeling in Machining Simulation of 7075-T651 Aluminum Alloy
Source abstract
Abstract
Accurate modeling of workpiece material behavior in machining is critical to analyze and design a process. The workpiece material behavior in the machining process involves dynamic flow stress and damage/fracture behavior, which are very difficult to be determined. In this study, the extended split Hopkinson pressure bar (SHPB) test is conducted to determine the dynamic flow stress curves of 7075-T651 aluminum alloy, which enables the strain, strain rate and the temperature obtained in the test to approach that in the cutting condition. A damage criterion under the typical stress state of orthogonal cutting is established to reflect the material damage initiation in primary shear zone. The damage criterion parameters of 7075-T651 alloy are determined by comparing the numerical and experimental results of the proposed inner high-pressure piercing fracture test. The orthogonal cutting test and simulation of 7075-T651 alloy are conducted. It is demonstrated that the determined flow stress and the established damage criterion produces realistic process outputs in agreement with experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · High-Velocity Impact and Material Behavior · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanghai Key Laboratory of Digital Autobody Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
State Key Laboratory of Mechanical System and Vibration, Shanghai 200240, China e-mail:
References (17)
Show source-provided references
1. Machining Induced Residual Stress in Structural Aluminum Parts10.1007/s11740-008-0097-1 ↗
2. The Strain Rate and Temperature Dependence of the Dynamic Impact Properties of 7075 Aluminum Alloy10.1016/S0924-0136(99)00465-3 ↗
3. Process Modeling in Machining. Part I. Determination of Flow Stress Data10.1016/S0890-6955(01)00016-5 ↗
4. An Integral Method to Determine the Mechanical Behavior of Materials in Metal Cutting10.1016/S0924-0136(03)00462-X ↗
5. A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining10.1115/1.2118767 ↗
6. Characterization, Modelling and Simulation of Deformation and Fracture Behaviour of the Light-Weight Wrought Alloys Under High Strain Rate Loading10.1016/j.ijimpeng.2005.03.008 ↗
7. Catastrophic Thermoplastic Shear10.1115/1.3629585 ↗
8. The Split Shear Zone-Mechanism of Chip Segmentation
9. Machining Characteristics of Hard Materials10.1016/S0007-8506(07)61592-3 ↗
10. Observations on Chip Formation and Acoustic Emission in Machining Ti-6Al-4V Alloy10.1016/S0890-6955(00)00096-1 ↗
11. Numerical and Experimental Study of Dry Cutting for an Aeronautic Aluminum Alloy (A2024-T351)10.1016/j.ijmachtools.2008.03.013 ↗
12. Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and Its Application in Hard Machining Simulations10.1115/1.2193549 ↗
13. Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements10.1016/0008-8846(76)90007-7 ↗
14. Riddle, R. A., Streit, R. D., and Finnie, I., 1988, “The Failure of Aluminum Compact Shear Specimens Under Mixed-Mode Loading,” Proceedings of Fracture Mechanics: Eighteenth Symposium (ASTM STP 945), Boulder, CO, June 25–27, D. T.Read and R. P.Reed, eds., American Society for Testing and Materials, Philadelphia, Paper No. STP23237S, pp. 118–133.10.1520/STP23237S10.1520/STP23237S ↗
15. Ductile Fracture Simulation of Hydropiercing Process Based on Various Criteria in 3D Modeling10.1016/j.matdes.2010.02.046 ↗
16. Some Clarifications on the Mechanisms of Chip Formation When Machining Titanium Alloys10.1016/0043-1648(82)90113-2 ↗
17. Hou, B., Wu, Y. F., Li, S. H., Lin, Z.-Q., and Yu, Z.-Q., 2011, “A Comparative Study of Different Chip Separation Approaches for Numerical Modeling of Orthogonal Cutting,” Proceedings of SimulTech'2011, Noordwijkerhout, The Netherlands, July 29–31, pp. 458–464.