journal article·2010-04-01

Damage and Rupture Simulation for Mechanical Parts Under Cyclic Loadings

Fabien Bogard, Philippe Lestriez, Ying-Qiao Guo

Publisher page

Abstract

The purpose of this study is to develop a numerical methodology to simulate the fatigue damage of revolving mechanical parts under cyclic loadings (such as rolling bearings). The methodology is based on the continuum damage mechanics and on a fatigue damage model. The fatigue damage can be caused by numerous loading cycles, even in an elastic state; the damage will then influence the elastoplastic behaviors. The coupling effect of both enfeebles the material strength and leads to the rupture. An important improvement on the Sines fatigue criterion is proposed, which allows the coupling behaviors of damage and plasticity to be described better. This paper deals with the following aspects: (i) the fatigue damage model and the identification of fatigue parameters using S-N curves; (ii) the elastoplastic constitutive behaviors coupled with the fatigue damage; (iii) a cycle jumping algorithm to reduce the computation time; and (iv) an adaptative remeshing to follow the rupture propagation. These mechanical and numerical models are implemented in the framework of ABAQUS software. Two applications are presented in this paper: the fatigue lifetime prediction for a cyclic tension specimen and the fatigue spalling (or chipping) initiation and growth in a thrust roller bearing under a cyclic loading. The present approach is very efficient and helpful for the lifetime prediction of revolving mechanical components.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Gear and Bearing Dynamics Analysis · Engineering Structural Analysis Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

GRESPI/LMN, Université de Reims Champagne Ardenne, Moulin de la House, BP1039, 51687 Reims Cedex2, France

References (40)

Show source-provided references
1. Determination of Sensor Positions for Predictive Maintenance of Revolving Machines10.1016/S0020-7683(02)00117-8 ↗
2. A Model for Rolling Contact Failure10.1016/S0043-1648(98)00311-1 ↗
3. A Re-Evaluation of the Life to Rupture of Ductile Metals by Cyclic Plastic Strain10.1111/j.1460-2695.1994.tb00801.x ↗
4. A Tribological Characterization of the Damage Mechanism of Low Rail Corrugation on Sharp Curved Track10.1016/j.wear.2005.06.004 ↗
5. Fatigue Crack Growth From Foreign Object Damage Under Combined Low and High Cycle Loading. Part II: A Two-Parameter Predictive Approach10.1016/j.ijfatigue.2006.10.014 ↗
6. Assessment of Bending Fatigue Limit for Crankshaft Sections With Inclusion of Residual Stresses10.1016/j.ijfatigue.2006.03.009 ↗
7. Simulation of Cyclic Stress/Strain Evolutions for Multiaxial Fatigue Life Prediction10.1016/j.ijfatigue.2005.07.038 ↗
8. FE-Simulation of the Effects of Machining-Induced Residual Stress Profile on Rolling Contact of Hard Machined Components10.1016/j.ijmecsci.2004.03.014 ↗
9. Finite Element Modeling of Fatigue Damage Using a Continuum Damage Mechanics Approach10.1115/1.1858927 ↗
10. Prediction of the Fatigue Behaviour of Physically Vapour Deposited Coatings in the Ball on Rod Rolling Contact Fatigue Test, Using an Elastic-Plastic Finite Element Method Simulation10.1016/S0043-1648(96)07494-7 ↗
11. Elasto-Plastic Finite-Element Analysis of 2-D Rolling Sliding Contact With Temperature-Dependent Bearing Steel Material Properties10.1016/0043-1648(93)90306-7 ↗
12. Fatigue of Railway Wheels and Rails Under Rolling Contact and Thermal Loading—An Overview10.1016/j.wear.2004.03.039 ↗
13. The Strength of Surfaces in Rolling Contact10.1243/PIME_PROC_1989_203_100_02 ↗
14. Application of the Kinematical Shakedown Theorem to Rolling and Sliding Point Contacts
15. Verification of Numerical Determination of Carrying Capacity of Large Rolling Bearings With Hardened Raceway10.1016/j.ijfatigue.2007.02.003 ↗
16. Rolling Contact Fatigue of a Rail Steel10.1016/0043-1648(87)90152-9 ↗
17. Wheel Shelling and Spalling, An Interpretive Review
18. ERRI, 1990, “Review of Rolling Contact Fatigue in Rails,” Question D173, Report No. 1, European Rail Research Institute, Utrecht, Netherlands.
19. Elastoplastic Analysis of Repeated Moving Contact-Application to Railways Damage Phenomena10.1016/0043-1648(95)06864-3 ↗
20. Modelling of Rolling Contact Fatigue for Hard Machined Components With Process-Induced Residual Stress10.1016/j.ijfatigue.2003.10.009 ↗
21. Fatigue Crack Initiation Life Prediction of Railroad Wheels10.1016/j.ijfatigue.2005.09.007 ↗
22. 3D Finite Element Investigation on the Plastic Flows of Rolling Contacts-Correlation With Rail Head Microstructural Observations10.1016/j.wear.2004.03.069 ↗
23. Fatigue Evaluation of Surface Coated Railway Rails Using Shakedown Theory, Finite Element Calculations and Lab and Field Trials10.1016/j.ijfatigue.2004.11.002 ↗
24. Lemaitre
25. ABAQUS Software, 2006, Documentation v6.6.
26. Fatigue Criteria Under Combined Stresses or Strains10.1115/1.3224995 ↗
27. Fatigue of Metals Under Combinations of Stresses10.1115/1.4013320 ↗
28. An Explanation on Fatigue Limit Under Combined Stress10.1299/jsme1958.20.257 ↗
29. On a New Multiaxial Fatigue Limit Criterion: Theory and Applications
30. Effect of Large Hydrostatic Pressures on the Torsional Fatigue Strength of an Alloy Steel
31. Lee, S. B. , 1980, “Evaluation of Theories on Multiaxial Fatigue With Discriminating Specimens,” Ph.D. thesis, Stanford University, CA.
32. Ngargueudedjim, K. , 1998, “Contribution à l’étude des lois d’endommagement en fatigue,” Ph.D. thesis, INSA, Lyon, France.
33. Computational Damage Mechanics. Application to Metal Forming10.1016/B0-08-043749-4/03072-X ↗
34. A Unified Approach to Finite Deformation Elastoplastic Analysis Based on the Use of Hyperelastic Constitutive Equations10.1016/0045-7825(85)90061-1 ↗
35. Damage Modelling in Metal Forming Processes10.1106/C3UL-M5G1-N1KY-B4KB ↗
36. Continuum Damage Mechanics: Part I and II—General Concepts10.1115/1.3173661 ↗
37. Lestriez, P. , 2003, “Modélisation numérique du couplage thermo-mécanique-endommagement en transformations finies. Application à la mise en forme,” Ph.D. thesis, UTT, Troyes.10.1051/jp4:20020512 ↗
38. Numerical Modeling of Fatigue Damage and Fissure Propagation10.1177/1056789508088961 ↗
39. Application of Local Stress-Strain Approaches in the Prediction of Fatigue Crack Initiation Life for Cyclically Non-Stabilized and NON-MASSING STEEL10.1016/j.ijfatigue.2005.07.014 ↗
40. Rolling Contact Fatigue Failure Modes of Lubricated Silicon Nitride in Relation to Ring Crack Defects10.1016/S0043-1648(98)00402-5 ↗