Energy-Absorbing Capacity of Polyurethane/SiC/Glass-Epoxy Laminates Under Impact Loading
Source abstract
Abstract
This paper presents the energy absorption of target materials with combinations of polyurethane (PU) foam, PU sheet, SiC inserts, and SiC plate bonded to glass fiber reinforced composite laminate backing during impact loading. SiC inserts and SiC plates are bonded as front layer to enhance energy absorption and to protect composite laminate. The composite laminates are prepared by hand lay-up process and other layers are bonded by using epoxy. Low-velocity impact is conducted by using drop mass setup, and mild steel spherical nosed impactor is used for impact testing of target in fixed boundary conditions. Energy absorption and damage are compared to the target plates when subjected to impact at different energy levels. The energy absorbed in various failure modes is analyzed for various layers of target. Failure in the case of SiC inserts is local, and the insert under the impact point is damaged. However, in the other cases, the SiC plate is damaged along with fiber failure and delamination on the composite backing laminate. It is observed that the energy absorbed by SiC plate layered target is higher than SiC inserts layered target.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, India
Department of Mechanical Engineering, Indian Institute of Technology Bhubaneswar, Bhubaneswar 751013, India
Department of Applied Mechanics, Indian Institute of Technology Madras, Chennai 600036, India e-mail:
References (31)
Show source-provided references
1. 1994
2. Modeling of the Energy Absorption by Polymer Composites Upon Ballistic Impact10.1016/S0266-3538(00)00139-1 ↗
3. Localized Impact on Sandwich Structures With Laminated Facings10.1115/1.3101689 ↗
4. Penetration and Perforation of Thick FRP Laminates10.1016/S0266-3538(01)00020-3 ↗
5. Energy Absorption and Ballistic Limit of Nanocomposite Laminates Subjected to Impact Loading10.1016/j.ijimpeng.2014.02.017 ↗
6. Two-Dimensional Response of Crushable Polyurethane Foam to Low Velocity Impact10.1016/S0734-743X(99)00149-9 ↗
7. Experimental and Numerical Study on the Low-Velocity Impact Behavior of Foam-Core Sandwich Panels10.1016/j.compstruct.2012.09.002 ↗
8. Low-Velocity Impact Response of Sandwich Composites With Nanophased Foam Core and Biaxial ±45 Braided Face Sheets10.1016/j.compositesb.2009.03.010 ↗
9. Impact Response of High Density Flexible Polyurethane Foam10.1016/j.ijimpeng.2011.09.004 ↗
10. Study of Foam Density Variations in Composite Sandwich Panels Under High Velocity Impact Loading10.1016/j.ijimpeng.2013.08.009 ↗
11. A Review of Ceramics for Armor Applications
12. 2006
13. Hierarchy of Key Influences on the Ballistic Strength of Opaque and Transparent Armor10.1002/9780470339695.ch4 ↗
14. Effective Damage Mechanisms and Performance Evaluation of Ceramic Composite Armors Subjected to Impact Loading10.1177/0021998313508594 ↗
15. Numerical Simulation of Ceramic Composite Armor Subjected to Ballistic Impact10.1016/j.compositesb.2010.10.001 ↗
16. Evidence of Optimal Interfaces in Bio-Inspired Ceramic Composite Panels for Superior Ballistic Protection10.1016/j.jeurceramsoc.2013.12.039 ↗
17. A New Analytical Model to Simulate Impact Onto Ceramic/Composite Armors10.1016/S0734-743X(98)00006-2 ↗
18. An Energy-Based Model for Ballistic Impact Analysis of Ceramic-Composite Armors10.1177/1056789511435346 ↗
19. Analysis of Ceramic/Metal Armour Systems10.1016/S0734-743X(01)00025-2 ↗
20. Influence of Different Back Laminate Layers on Ballistic Performance of Ceramic Composite Armor10.1016/j.matdes.2015.08.024 ↗
21. Impact Mechanics and High-Energy Absorbing Materials: Review10.1061/(ASCE)0893-1321(2008)21:4(235) ↗
22. Crashworthy Capability of Composite Material Structures10.1016/S0263-8223(97)80005-0 ↗
23. 1998
24. Impact of Metallic Projectiles on Ceramic Targets: Transition Between Interface Defeat and Penetration10.1016/S0734-743X(99)00152-9 ↗
25. Experimental and Numerical Study on the Low-Velocity Impact Behavior of Foam-Core Sandwich Panels10.1016/j.compstruct.2012.09.002 ↗
26. Energy Absorption and Low Velocity Impact Response of Polyurethane Foam Filled Pyramidal Lattice Core Sandwich Panels10.1016/j.compstruct.2013.09.040 ↗
27. Ballistic Performance of a Composite Metal Foam-Ceramic Armor System10.1016/j.mspro.2014.07.571 ↗
28. Manufacturing and Low-Velocity Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites With Hybrid Face Sheets10.1016/j.compstruct.2004.06.008 ↗
29. Low-Velocity Impact Response of Foam-Core Sandwich Composites10.1177/002199839202600403 ↗
30. Modeling of Failure Mode Transition in Ballistic Penetration With a Continuum Model Describing Micro Cracking and Flow of Pulverized Media10.1002/nme.427 ↗
31. Analytical Prediction of Indentation and Low-Velocity Impact Responses of Fully Backed Composite Sandwich Plates