journal article·2008-04-01

Advances in Virtual Metal Forming Including the Ductile Damage Occurrence: Application to 3D Sheet Metal Deep Drawing

K. Saanouni, H. Badreddine, M. Ajmal

Publisher page

Abstract

An advanced numerical methodology to simulate virtually any sheet or bulk metal forming including various kinds of initial and induced anisotropies fully coupled to the isotropic ductile damage is presented. First, the fully coupled anisotropic constitutive equations in the framework of continuum damage mechanics under large plastic deformation are presented. Special care is paid to the strong coupling between the main mechanical fields such as elastoplasticity, mixed nonlinear isotropic and kinematic hardenings, ductile isotropic damage, and contact with friction in the framework of nonassociative and non-normal formulation. The associated numerical aspects concerning both the local integration of the coupled constitutive equations as well as the (global) equilibrium integration schemes are presented. The local integration is outlined, thanks to the Newton iterative scheme applied to a reduced system of ordinary differential equations. For the global resolution of the equilibrium problem, the classical dynamic explicit (DE) scheme with an adaptive time step control is used. This fully coupled procedure is implemented into the general purpose finite element code for metal forming simulation, namely, ABAQUS/EXPLICIT. This gives a powerful numerical tool for virtual optimization of metal forming processes before their physical realization. This optimization with respect to the ductile damage occurrence can be made either to avoid the damage occurrence to have a nondamaged part as in forging, stamping, deep drawing, etc., or to favor the damage initiation and growth for some metal cutting processes as in blanking, guillotining, or machining by chip formation. Two 3D examples concerning the sheet metal forming are given in order to show the capability of the proposed methodology to predict the damage initiation and growth during metal forming processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering and Mechanics of Materials Department, ICD/LASMIS, FRE CNRS 2848, University of Technology of Troyes, BP 2060, 10010 Troyes Cedex, France

References (54)

Show source-provided references
1. Computational Damage Mechanics: Application to Metal Forming10.1016/B0-08-043749-4/03072-X ↗
2. Numerical Simulation of Sheet Metal Blanking Process Using a Coupled Finite Elastoplastic Damage Modelling10.3166/ijfp.6.7-32 ↗
3. Numerical Simulation of Sheet Cutting
4. Remeshing Processes Applied to the Simulation of Metal Cutting10.1080/12506559.1996.10511229 ↗
5. Numerical Modelling of the Metal Blanking Process10.1016/S0924-0136(98)00062-4 ↗
6. Finite Element Model Fracture Prediction During Sheet-Metal Blanking Processes10.1016/S0013-7944(00)00106-5 ↗
7. Cordebois, J. P. , 1983, “Critères d’instabilité plastique et endommagement ductile en grandes déformations,” Thèse d’Etat, Université Paris VI.
8. An Imposed Finite Element Method for the Analysis of Damage and Ductile Fracture in Cold Metal Forming Processes10.1016/S0007-8506(07)61758-2 ↗
9. The Prediction of Ductile Fracture Initiation in Metalforming Using a Finite Element Method and Various Fracture Criteria
10. Extrusion Analysis and Workability Prediction Using Finite Element Method10.1016/0045-7949(90)90135-O ↗
11. The Finite Element Prediction of Ductile Fracture Initiation in Dynamic Metalforming Processes
12. Fracture in Forming Processes
13. Necking Criterion Applied in Sheet Metal Forming
14. The Analysis of Void Growth That Leads to Central Burst During Extrusion10.1016/0022-5096(86)90005-0 ↗
15. Plastic and Viscoplastic Flow of Void Containing Metal: Applications to Axisymmetric Sheet Forming Problem10.1002/nme.1620250118 ↗
16. Finite Element Analysis of Ductile Fracture and Defects Formations in Cold and Hot Forging10.1016/S0007-8506(07)61038-5 ↗
17. Numerical Investigation of the Damage Process in Metal Forming10.1016/0013-7944(91)90272-3 ↗
18. The Prediction of Necking and Failure in 3D Sheet Forming Analysis Using Damage Variable
19. Optimization of Metal Forming Process Parameters With Damage Minimization
20. An Anisotropic Damage Criterion for Deformation Instability and Its Application to Forming Limit Analysis of Metal Plates10.1016/0013-7944(85)90008-6 ↗
21. Damage Evolution Modeling in Bulk Forming Processes10.1016/B978-0-444-42859-2.50029-6 ↗
22. A Fully Coupled Elastoplastic Damage Modeling and Fracture Criteria in Metal Forming Processes10.1016/0924-0136(92)90177-T ↗
23. A Fully Coupled Elasto-Visco-Plastic Damage Theory for Anisotropic Materials10.1016/0020-7683(94)00195-3 ↗
24. Numerical Simulation of Damage in Metal Forming Processes
25. Damage Modelling in Metal Forming Processes10.1106/C3UL-M5G1-N1KY-B4KB ↗
26. Numerical Aspects of Finite Elastoplasticity With Isotropic Ductile Damage for Metal Forming
27. Remaillage en grandes déformations. Application à la mise en forme de structures 2D10.3166/reef.11.57-79 ↗
28. Numerical Simulation of Ductile Damage in Metal Forming Processes: A Simple Predictive Model. Part I. Theoretical and Numerical Aspects10.3166/ijfp.5.363-376 ↗
29. Numerical Simulation of Ductile Damage in Metal Forming Processes: A Simple Predictive Model. Part II: Some Applications10.3166/ijfp.5.377-390 ↗
30. Numerical Simulation of Extrusion With Central Bursting Prediction by Continuum Damage Mechanics
31. Mariage, J.-F. , 2003, “Simulation numérique de l’endom-magement ductile en formage de pièces massives,” Ph.D. thesis, University of Technology of Troyes.
32. Numerical Improvement of Thin Tubes Hydroforming With Respect to Ductile Damage10.1016/S0020-7403(02)00177-7 ↗
33. Elastoplasticité anisotrope non normale en grandes déformations avec endommagement. Application à la mise en forme de tôles minces
34. Badreddine, H. , 2006, “Elastoplasticité anisotrope endommageable en grandes déformations: Aspects théoriques, numériques et application,” Ph.D. thesis, UTT.10.13052/REMN.16.913-940 ↗
35. Badreddine, H., Saanouni, K., and Dogui, A., “On Finite Plastic Meta Model Fully Coupled With Ductile Damage,” unpublished.
36. Badreddine, H., Saanouni, K., and Dogui, A., “On Numerical Integration of Finite Plastic Meta Model Fully Coupled With Ductile Damage,” unpublished.
37. Dogui, A. , 1989, “Plasticité anisotrope en grandes déformations,” Thèse de doctorat d’état, Université Claude Bernard, Lyon I.
38. Lemaitre
39. Lemaitre
40. On the Anelastic Flow With Damage10.1177/105678959400300203 ↗
41. A Theory of Yielding and Plastic Flow of Anisotropic Metals
42. Simo
43. Nonlinear Continuum Mechanics for Finite Element Analysis10.1017/CBO9780511755446 ↗
44. Non-Linear Finite Element Analysis of Solids and Structures10.1061/(ASCE)0733-9399(1993)119:7(1504) ↗
45. Nonlinear Finite Elements for Continua and Structures
46. Numerical Prediction of Damage in Metal Forming Process Including Thermal Effects10.1177/1056789504039257 ↗
47. Numerical Prediction of Discontinuous Central Bursting in Axisymmetric Forward Extrusion by Continuum Damage Mechanics10.1016/j.compstruc.2004.05.018 ↗
48. Virtual Metal Forming With Damage Occurrence and Adaptive Remeshing10.3166/ijfp.8.311-339 ↗
49. Effect of Anisotropic Plastic Flow on the Ductile Damage Evolution in Hydrobulging Test of Thin Sheet Metal10.3166/ijfp.8.271-289 ↗
50. Adaptive Remeshing in Large Plastic Strain With Damage10.1002/nme.1274 ↗
51. Simulation numérique de la coupe orthogonale par couplage thermique-comportement-endommagement en transformations finies10.1051/meca:2005033 ↗
52. Transfert de champs plastiquement admissibles10.1016/S1631-0721(02)01457-2 ↗
53. Laug, P., and Borouchaki, H., 2001, “BL2D-V2: Mailleur adaptatif bidimensionnel de domaine à frontière variable,” INRIA, Rapport Techninique.
54. Col, A. , 2002, Techniques de l’Ingénieur-Emboutissage des tôles, “Importance des modes de déformation,” BM 7510-2002.10.51257/a-v1-bm7510 ↗