Analysis of Space Shuttle External Tank Spray-On Foam Insulation With Internal Pore Pressure
Source abstract
Abstract
The polymer spray-on foam insulation used on NASA’s Space Shuttle external fuel tank is analyzed via the high-fidelity generalized method of cells micromechanical model. This model has been enhanced to include internal pore pressure, which is applied as a boundary condition on the internal faces of the foam pores. The pore pressure arises due to both ideal gas expansion during a temperature change as well as outgassing of species from the foam polymer material. Material creep and elastic stiffening are also incorporated via appropriate constitutive models. Due to the lack of reliable properties for the in situ foam polymer material, these parameters are backed out from foam thermomechanical test data. Parametric studies of the effects of key variables (both property-related and microstructural) are presented as is a comparison of model predictions for the thermal expansion behavior of the foam with experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
Tel Aviv University, Tel Aviv 69978, Israel
References (45)
Show source-provided references
1. Gehman
2. Nondestructive Testing of the Space Shuttle External Tank Spray-On-Foam Insulation Using Near Field and Focused Millimeter Wave Techniques
3. NASA Research Center Contributions to Space Shuttle Return to Flight10.2514/6.2005-3626 ↗
4. Nondestructive Evaluation of Foam Insulation for the External Tank Return to Flight10.2514/6.2006-4601 ↗
5. Fracture Characterization of a Closed-Cell Foam Material Using a Full-Field Displacement and Strain Measurement Technique10.2514/6.2006-2200 ↗
6. Application of Video Image Correlation Techniques to the Space Shuttle External Tank Foam Materials10.2514/6.2006-2199 ↗
7. A General Tetrakaidecahedron Model for Open-Celled Foams10.1016/j.ijsolstr.2007.10.028 ↗
8. The Generalized Method of Cells and High-Fidelity Generalized Method of Cells Micromechanical Models—A Review10.1080/15376490490451543 ↗
9. see also NASA Report No. NASA/TM-2002-211469.10.1016/S0749-6419(02)00007-4 ↗
10. Micromechanical Analysis of Fully Coupled Electro-Magneto-Thermo-Elastic Multiphase Composites10.1088/0964-1726/10/5/303 ↗
11. Micromechanical Analysis of Lattice Blocks10.1016/j.ijsolstr.2005.01.008 ↗
12. Gibson
13. Analysis of the Elastic Properties of Open-Cell Foams With Tetrakaidecaheral Cells10.1016/S0022-5096(96)00090-7 ↗
14. The Effects of Heat Transfer and Poisson’s Ratio on the Compressive Response of Closed Cell Polymer Foams10.1177/0262489319971602001 ↗
15. The High Strain Compression of Closed-Cell Polymer Foams10.1016/S0022-5096(98)00007-6 ↗
16. Thermal Expansion Coefficient and Bulk Modulus of Polyethylene Closed-Cell Foams10.1002/polb.20230 ↗
17. Calculations of Deformation of Cellular Plastics by Applying the Finite Element Method
18. Effects of Solid Distribution on the Stiffness and Strength of Metallic Foams10.1016/S1359-6454(97)00421-7 ↗
19. Influence of Cell Wall Thickness Variations on Elastic Stiffness of Closed-Cell Cellular Solids10.1016/S0020-7403(99)00054-5 ↗
20. Elastic Moduli of Model Random Three-Dimensional Closed-Cell Cellular Solids10.1016/S1359-6454(00)00314-1 ↗
21. Mechanics of Hollow Sphere Foams10.1016/S0921-5093(02)00583-X ↗
22. The Effect of Microstructure on the Stiffness and Strength of Closed Cell Foams10.2514/6.2006-2097 ↗
23. A Micromechanics Finite Element Model for Studying the Mechanical Behavior of BX-265 Spray-On Foam Insulation
24. 2006, ABAQUS Finite Element Analysis Software, ABAQUS, Inc., Providence, RI.
25. Porous Media Approach for Modeling Closed Cell Foam
26. Advanced Finite Element Modeling of Polymer Foam Components
27. Application of Mean-Field Approximation to Elastic Plastic Behavior of Metal Foams10.1016/S1359-6454(03)00322-7 ↗
28. Average Stress in Matrix and Average Elastic Energy of Material With Misfitting Inclusions10.1016/0001-6160(73)90064-3 ↗
29. Lerch, B. A., and Sullivan, R. M., 2008, “Experimental Investigation of Space Shuttle BX-265 Foam,” NASA Report No. NASA/TM-2008-215292.
30. Local Field Effects in Titanium Matrix Composites Subject to Fiber-Matrix Debonding10.1016/j.ijplas.2003.11.019 ↗
31. Arnold, S. M., Bednarcyk, B. A., and AboudiJ., 2001, “Thermo-Elastic Analysis of Internally Cooled Structures Using a Higher Order Theory,” NASA, Report No. NASA/TM2001-210702.
32. Wells, D. N. , 2006, private communication.
33. Morgan, K. , 2006, “External Tank Return to Flight Test Report (Fracture Toughness: Phase 2),” Lockheed Martin Space Systems Company, Report No. 802-9772.
34. Chen
35. Ashby
36. Lerch, B. A. , 2007, private communication.
37. Sullivan, R. M., Ghosn, L. J., and Lerch, B. A., 2008, “An Elongated Tetrakaidecahedron Model for Space Shuttle External Tank Foams,” NASA, Report No. NASA/TP-2008-215137.
38. Thermal Expansion of Polyurethane Foam
39. Wright, L. S., and Lerch, B. A., 2005, “Characterization of Space Shuttle Insulative Materials,” NASA, Report No. NASA/TM–2005-213596.
40. Lerch, B. A. , 2006, private communication.
41. 2005, CAMBRIDGE ENGINEERING SELECTOR V4, Granta Design Limited, Cambridge, UK.
42. Bowman
43. Wolfram
44. Thermal Expansion of Three Closed Cell Polymeric Foams at Cryogenic Temperatures
45. Toensmeier