Issues in Thermal Contact and Phase Change in Porosity Prediction
Source abstract
Abstract
One of the major objectives of solidification modeling is to determine, prior to pouring, whether porosity, such as massive cavities and dispersed pores, are likely to appear in the casting. The numerical solutions of solidification heat transfer alone, however, cannot provide such information. In order to predetermine the presence of porosity, various criteria functions have been proposed by a number of investigators. These criteria functions are associated with cooling rate, thermal gradient, solidus velocity and local solidification time, etc. Since these parameters can be derived from numerical solutions, the reliability of porosity prediction largely depends on the accuracy of the numerical solutions employed. Thermal contact and phase change affect the numerical solutions significantly, and hence the local values of the predicted parameters. Consequently, these phenomena must be given special attention. This paper addresses some important aspects of thermal contact and phase change in determining the values of criteria functions. The free thermal contraction method is used to describe the variation and distribution of the heat transfer coefficient at the casting/mold interface. The phase change problem is treated by the heat source/sink algorithm. The sensitivity of criteria functions and the role of computational error are also discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, AL 35487-0202
Department of Engineering Mechanics, The University of Alabama, Tuscaloosa, AL 35487-0202
References
Reference metadata was not supplied for this record.