Development of Strong Surfaces Using Functionally Graded Composites Inspired by Natural Teeth—A Theoretical Approach
Source abstract
Abstract
In recent years functionally-graded composites have been proposed to develop strong surfaces that can withstand high contact and frictional forces. The present work presents a new graded composite that can be used for the development of surfaces with excellent strength properties. The composite is inspired by the human teeth, which nature builds as a hard and tough functionally-graded composite. The outer surface of teeth is of enamel, composed of prismatic hydroxyapatite crystallites, whereas the inner part of teeth is of dentine, composed collagen fibrils and hydroxyapatite. Enamel is hard, brittle, and wear resistant, while dentine is softer and flexible. The dentine-enamel junction is formed as a region at which enamel mixes with dentine in a continuous way. The nanomechanical properties of the transition zone have been recently revealed. Of particular interest in this investigation is the variation in the elastic modulus from the pure enamel to the pure dentine material, which leads to biomimetic graded composites that exhibit high surface strength. This work presents analytical solutions for the stress and displacement fields on an actual composite substrate, which is loaded by a line load. The elastic modulus of the substrate follows approximately the theoretical distribution.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Metal and Thin Film Mechanics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Laboratory for Strength of Materials and Micromechanics, University of Thessaly, Volos 38336, Greece
References (29)
Show source-provided references
1. Brittle Fracture Under a Sliding Line Contact10.1016/0022-5096(94)90002-7 ↗
2. An Elastic-Plastic-Cracking Model for Finite Element Analysis of Indentation Cracking in Brittle Materials10.1016/S0020-7683(00)00406-6 ↗
3. Graded Microstructure and Mechanical Properties of Human Crown Dentine10.1007/s00223-001-2012-z ↗
4. Dentine Erosion Simulation by Cantilever Beam Fatigue and pH Change10.1177/154405910508400415 ↗
5. Lubrication of Human and Bovine Enamel Compared in an Artificial Mouth10.1016/0003-9969(95)00031-J ↗
6. Mechanical Properties of Human Dental Enamel on the Nanometre Scale10.1016/S0003-9969(00)00089-3 ↗
7. Micro-Mechanical Characterisation of the Properties of Primary Tooth Dentine10.1016/S0300-5712(03)00045-9 ↗
8. Experimental Determination of the Rigidity Modulus Poissons Ratio and Elastic Limit in Shear of Human Dentine10.1016/0003-9969(75)90150-8 ↗
9. Mechanical Properties of the Dentino-Enamel Junction AFM Studies of Nanohardness Elastic Modulus and Fracture10.1002/1097-4636(200101)54:1<87::AID-JBM10>3.0.CO;2-Z ↗
10. Fracture Toughness of Human Dentin10.1177/00220345860650050901 ↗
11. Dentin Shear Strength, Effect of Distance From the Pulp10.1016/S0109-5641(01)00077-X ↗
12. Measurement of the Microhardness and Young’s Modulus of Human Enamel and Dentine Using an Indentation Technique10.1016/0003-9969(96)00020-9 ↗
13. Fisher-Cripps
14. The Hardness and Modulus of Elasticity of Primary Molar Teeth, An Ultra-Micro-Indentation Study10.1016/S0300-5712(00)00043-9 ↗
15. Evaluation of a New Modulus Mapping Technique to Investigate Microstructural Features of Human Teeth10.1016/j.jbiomech.2003.12.012 ↗
16. A Micromechanics Model of the Elastic Properties of Human Dentine10.1016/S0003-9969(99)00080-1 ↗
17. Two-Dimensional Contact Analysis of Elastic Graded Materials10.1016/S0022-5096(99)00068-X ↗
18. Contact Mechanics of Graded Coatings10.1016/j.ijsolstr.2004.02.025 ↗
19. Huang
20. American Association of State Highways and Transportation Officials AASHTO, 1993, “Guide for Design on Pavement Structures,” Washington, DC.
21. Serway
22. Johnson10.1017/CBO9781139171731 ↗
23. Two Dimensional Contact Mechanics of Functionally Graded Materials With Arbitrary Special Variations of Material Properties10.1016/j.ijsolstr.2005.06.081 ↗
24. Two Dimensional Sliding Frictional Contact of Functionally Graded Materials10.1016/j.euromechsol.2006.05.007 ↗
25. Axisymmetric Frictionless Contact of Functionally Graded Materials10.1007/s00419-007-0160-y ↗
26. Axisymmetric Frictionless Contact of Functionally Graded Materials10.1007/s00419-008-0232-7 ↗
27. Axisymmetric Frictionless Contact Problem of a Functionally Graded Coating With Exponentially Varying Modulus10.1007/s00707-007-0556-3 ↗
28. Sokolnikoff
29. 2004, “Guideline and Recommended Standard for Geofoam, Applications in Highway Embankments,” NCHRP Report No. 529.