journal article·2019-04-01

Investigation of Oil Adsorption Performance of Polypropylene Nanofiber Nonwoven Fabric

Wei Wu, Toshiki Hirogaki, Eiichi Aoyama, Morihiko Ikegaya, Hiroyoshi Sota

Publisher page

Abstract

Nanofibers can be used in fields/applications such as medical care, environment protection, apparel, and agriculture. In addition, we believe that this field would continue to show substantial growth in the future. In this study, we focused on its application to oil adsorption. Oil adsorbing performances achieved polymeric nanofiber mass production by a melt-blowing method. We first tested the oil adsorption performance of fiber experimentally under different bulk densities and thicknesses. We also conducted the suction experiment with different bulk densities. Based on experimental result, we considered contact angle, capillarity, and surface tension to be the causes of oil adsorption. We also proposed a three-direction physical model for oil adsorption and used it to calculate the theoretical oil adsorption rate by different free volumes. As a result, we confirmed that the proposed three-direction model could accurately estimate the oil adsorption rate. Moreover, nanofiber has exceptional oil adsorption performance. Further, the fiber with average diameter of 1500 nm exceeds 60 times its self-weight. Therefore, we believe that the proposed nanofiber nonwoven fabric oil adsorption pad could adequately be used as oil adsorption material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Organization for Research Initiatives and Development, Doshisha University, 1-3, Tataramiyakodani, Kyotanabe City 610-0321, Kyoto, Japan e-mail:

Department of Mechanical and System Engineering, Faculty of Science and Engineering, Doshisha University, 1-3 Miyakodani Tatara, Kyotanabe City 610-0321, Kyoto, Japan e-mail:

Technology Development Division of M-TechX Inc., 3-8-10, Ueno, Iwatsukiku, Saitama-shi, Saitama 339-0073, Japan e-mail:

M-TechX Inc., 3-8-10, Ueno, Iwatsukiku, Saitama-shi, Saitama 339-0073, Japan e-mail:

References (22)

Show source-provided references
1. Centrifugal Spinning: An Alternative Approach to Fabricate Nanofibers at High Speed and Low Cost10.1080/15583724.2014.935858 ↗
2. Nanofibers From Gas-Assisted Polymer Melt Electrospinning10.1016/j.polymer.2010.06.058 ↗
3. Study on Melt-Blowing Process for Coal-Tar Pitch10.7209/tanso.1993.75 ↗
4. Numerical Study on Two-Phase Flow Patterns in Coaxial Electrospinning10.1063/1.2717605 ↗
5. Vibration and Stability in the Melt Blowing Process10.1021/ie00024a020 ↗
6. Fiberization of Ceramics Using Melt-Blowing Method10.1299/kikaib.74.74 ↗
7. Influence of Viscosity and Elasticity on Diameter Distribution10.1016/j.jnnfm.2010.04.012 ↗
8. Online Measurement of Fiber Whipping in the Melt-Blowing Process10.1021/ie3024615 ↗
9. A Godunov-Type Method for the Seven-Equation Model of Compressible Two-Phase Flow10.1016/j.compfluid.2011.10.004 ↗
10. Solving Seven-Equation Model for Compressible Two-Phase Flow Using Multiple GPUs10.1016/j.compfluid.2014.04.021 ↗
11. Numerical Simulations of Compressible Flows Using Multi-Fluid Models10.1016/j.ijmultiphaseflow.2015.03.022 ↗
12. Wei, W., Lei Ma Eiichi, A., Toshiki, H., Morihiko, I., Takatsugu, E., and Sota, H., 2017, “Study on Oil Adsorption and Polishing Characteristics by Novel Nanofiber Pad for Ultra-Precision Abrasive Machining,” ASME Paper No. MSEC2017-2678.10.1115/MSEC2017-2678
13. Comparison of Oil Sorbent/Vial Kit for Sampling and Preservation of Liquid Volatile Petroleum10.1627/jpi.53.359 ↗
14. Evaluation of Kerosene Absorbing Ability for Peat Moss Using a Column Test
15. Sound Absorption Property of Porous Sound Absorbent Formed by Using Cotton Flies10.4188/jte.56.147 ↗
16. Study of Sound-Absorbing Materials Using Layered Narrow Clearances Between Two Surfaces (Theoretical Analysis and Experiments of Sensu (Folding Fan) Shaped Test Samples)
17. Comparison of Retention Capacities of Oil Sorbents for Collection of Volatile Petroleum Samples10.1627/jpi.53.313 ↗
18. Contact Angle and Wetting Properties
19. Studies of the Removal of Oily Soil by Rolling-Up in Detergency—II: On Binary Soil Systems Consisting of Oleic Acid and Liquid Paraffin10.1246/bcsj.49.3236 ↗
20. Interfacial Interactions Between Hydrocarbon Liquids and Solid Surfaces Used in Mechanical Oil Spill Recovery10.1016/j.jcis.2006.09.078 ↗
21. Controlling Water on Polypropylene Surfaces With Micro- and Micro/Nanostructures
22. Contact Angle and Surface Tension of Some Solvents Used in Pharmaceuticals