journal article·2020-07-01

Representative Volume Element for Mechanical Properties of Carbon Nanotube Nanocomposites Using Stochastic Finite Element Analysis

Seyed Hamid Reza Sanei, Randall Doles

Publisher page

Abstract

Abstract The aim of this study is to present a representative volume element (RVE) for nanocomposites with different microstructural features using a stochastic finite element approach. To that end, computer-simulated microstructures of nanocomposites were generated to include a variety of uncertainty present in geometry, orientation, and distribution of carbon nanotubes. Microstructures were converted into finite element models based on an image-based approach for the determination of elastic properties. For each microstructure type, 50 realizations of synthetic microstructures were generated to capture the variability as well as the average values. Computer-simulated microstructures were generated at different length scales to determine the change in mechanical properties as a function of length scale. A representative volume element is defined at a length scale beyond which no change in variability is observed. The results show that there is no universal RVE applicable to all properties and microstructures; however, the RVE size is highly dependent on microstructural features. Microstructures with agglomeration tend to require larger RVE. Similarly, random microstructures require larger RVE when compared with aligned microstructures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Composite Material Mechanics · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Penn State University, Erie, PA 16510

References (41)

Show source-provided references
1. Fabrication and Characterization of Microwave Cured High-Density Polyethylene/Carbon Nanotube and Polypropylene/Carbon Nanotube Composites10.1177/0021998318822705 ↗
2. Short Beam Shear of Nanoprepreg/Nanostitched Three Dimensional Carbon/Epoxy Multiwall Carbon Nanotubes Composites
3. Flexural Characterization of 3D Prepreg/Stitched Carbon/Epoxy/Multiwalled Carbon Nanotube Preforms and Composites10.1177/0021998318787861 ↗
4. Mechanical Behavior of Carbon Nanotubes-Based Polymer Composites Under Impact Tests10.1177/0021998318793502 ↗
5. Mechanical and Low-Velocity Impact Properties of Epoxy-Composite Beams Reinforced by MWCNTs10.1177/0021998318790049 ↗
6. Effects of Curvature and Alignment of Carbon Nanotubes on the Electrical Conductivity of Carbon Nanotube-Reinforced Polymers Investigated by Mesoscopic Simulations10.1177/0021998318794855 ↗
7. Improvement of Carbon Black Based Polymer Composite Electrical Conductivity with Additions of MWCNT10.1016/j.compscitech.2016.03.032 ↗
8. Relationship Between Electrical Conductivity and Spatial Arrangements of Carbon Nanotubes in Polystyrene Nanocomposites: The Effect of Thermal Annealing and Plasticization on Electrical Conductivity10.1016/j.compscitech.2017.04.020 ↗
9. Mechanical and Electrical Property Improvement in CNT/Nylon Composites Through Drawing and Stretching10.1016/j.compscitech.2011.07.023 ↗
10. Mechanical Properties of Carbon Nanotube/Polymer Composites10.1038/srep06479 ↗
11. Characterization of Nanocomposites by Thermal Analysis10.3390/ma5122960 ↗
12. Effect of Nanocomposite Microstructure on Stochastic Elastic Properties: An FEA Study10.1115/1.4043410 ↗
13. Nanocomposites: Manufacturing, Microstructural Characterization and Mechanical Testing10.12783/asc33/26060 ↗
14. Efficient 3D Reconstruction of Random Heterogeneous Media via Random Process Theory and Stochastic Reconstruction Procedure10.1016/j.cma.2019.05.033 ↗
15. The Stochastic Finite Element Method: Past, Present and Future10.1016/j.cma.2008.11.007 ↗
16. Stochastic Finite Element Analysis of Composite Structures Based on Material Microstructure10.1016/j.compstruct.2015.05.044 ↗
17. Practical Application of the Stochastic Finite Element Method10.1007/s11831-014-9139-3 ↗
18. Characterization, Synthetic Generation, and Statistical Equivalence of Composite Microstructures10.1177/0021998316662133 ↗
19. On Periodic Boundary Conditions and Ergodicity in Computational Homogenization of Heterogeneous Materials with Random Microstructure10.1016/j.cma.2019.07.032 ↗
20. A Simple and Robust Computational Homogenization Approach for Heterogeneous Particulate Composites10.1016/j.cma.2019.02.001 ↗
21. Subsampling and Homogenization to Investigate Variability of Composite Material Mechanical Properties10.1016/j.cma.2012.06.003 ↗
22. A Stochastic Computational Method for Evaluation of Global and Local Behavior of Random Elastic Media10.1016/j.cma.2004.12.001 ↗
23. Uncorrelated Volume Element for Stochastic Modeling of Microstructures Based on Local Fiber Volume Fraction Variation10.1016/j.compscitech.2015.06.010 ↗
24. Length-scale Dependence of Variability in Epoxy Modulus Extracted From Composite Prepreg10.1016/j.polymertesting.2015.12.015 ↗
25. Multiscale Modeling of Graphene- and Nanotube-Based Reinforced Polymer Nanocomposites10.1016/j.physleta.2011.08.073 ↗
26. Effect of Carbon Nanotube Orientation on the Mechanical Properties of Nanocomposites10.1016/j.compositesb.2012.01.063 ↗
27. Elastic Properties of CNT-and Graphene-Reinforced Nanocomposites Using RVE10.12989/scs.2016.21.5.1085 ↗
28. Hexagonal Representative Volume Element for Modeling and Analysis of Mechanical Properties of Carbon Nanotube Reinforced Composites10.4028/www.scientific.net/AMM.496-500.251 ↗
29. Modeling the Tensile Stress-Strain Response of Carbon Nanotube/Polypropylene Nanocomposites Using Nonlinear Representative Volume Element10.1016/j.matdes.2014.01.007 ↗
30. Multiscale Modeling of the Effect of Waviness and Agglomeration of CNTs on the Elastic Properties of Nanocomposites10.1016/j.commatsci.2016.01.029 ↗
31. Three-dimensional Micromechanical Analysis of the CNT Waviness Influence on the Mechanical Properties of Polymer Nanocomposites10.1007/s00707-016-1666-6 ↗
32. Evaluations of the Effective Material Properties of Carbon Nanotube-Based Composites Using a Nanoscale Representative Volume Element10.1016/S0167-6636(02)00200-4 ↗
33. Square Representative Volume Elements for Evaluating the Effective Material Properties of Carbon Nanotube-Based Composites10.1016/S0927-0256(03)00090-9 ↗
34. Mechanical Property Characterization of Carbon Nanotube Modified Polymeric Nanocomposites by Computer Modeling10.1016/j.compositesb.2013.08.052 ↗
35. Multiscale Modeling for Mechanical Properties of Carbon Nanotube Reinforced Nanocomposites Subjected to Different Types of Loading10.1016/j.compstruct.2011.03.013 ↗
36. Micromechanical Investigation of Creep-Recovery Behavior of Carbon Nanotube-Reinforced Polymer Nanocomposites10.1016/j.ijmecsci.2016.06.005 ↗
37. A Micromechanics Model for the Electrical Conductivity of Nanotube-Polymer Nanocomposites10.1177/0021998308105124 ↗
38. Figiel: Finite Strain Compressive Behaviour of CNT/Epoxy Nanocomposites: 2D Versus 3D RVE-Based Modelling
39. Analysis of Elastic Properties of Carbon Nanotube Reinforced Nanocomposites With Pinhole Defects10.1016/j.commatsci.2011.06.011 ↗
40. Mechanical Analysis of Three-Dimensional Braided Composites by Using Realistic Voxel-Based Model With Local Mesh Refinement10.1177/0021998318786541 ↗
41. An Efficient Approach to Converting Three-Dimensional Image Data Into Highly Accurate Computational Models10.1098/rsta.2008.0090 ↗