journal article·2016-01-01

Predicting the Peen Forming Effectiveness of Ti-6Al-4V Strips With Different Thicknesses Using Realistic Finite Element Simulations

Fan Yang, Yukui Gao

Publisher page

Abstract

This paper is intended to quantify the relationship between the peen forming effectiveness and various involved parameters through a realistic numerical study. For this purpose, a new finite element (FE) model is proposed with full geometry representation, random shots generation, and rate-dependent material law of kinematic strain-hardening. The mesh sensitivity and effects of boundary conditions are carefully examined. The FE model is validated by comparing the results with the experimental measurements. The proposed model is then used to investigate the effects of the peening intensity (represented as the shot velocity) and the strip thickness on the peen-formed deflection and the residual stress distribution for strips made of Ti-6Al-4V. Our results indicate the existence of a maximum convex deflection for different strip thicknesses. In addition, a reversed deflection (i.e., concaved curvature) is observed for severe peening conditions (i.e., thin strip under high peening intensity). Our simulations verify the previous proposition that a concaved curvature can be generated only when the whole cross section is plastically deformed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China e-mail:

School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China

References (34)

Show source-provided references
1. Huang, X., Zeng, Y., and Li, Z., 2006, “Finite Element Simulation of Peen Forming Process for the Saddle Shape,” International Technology and Innovation Conference (ITIC 2006), Hangzhou, China, Nov. 6–7, pp. 1240–1242.http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4752192&punumber%3D4717847%26filter%3DAND%28p_IS_Number%3A4751946%29%26pageNumber%3D3%26rowsPerPage%3D100
2. Shot Peen Forming Sheet Metal: Finite Element Prediction of Deformed Shape10.1243/PIME_PROC_1996_210_129_02 ↗
3. Aircraft Wing Skin Contouring by Shot Peening10.1007/BF02833639 ↗
4. Influence of Residual Stress On the Load–Deflection Curve of Diaphragm Springs for Automobile Clutches10.1016/S0389-4304(02)00299-0 ↗
5. Flexible Sheet Forming Technology by Double-Sided Simultaneous Shot Peen Forming10.1016/S0007-8506(07)61498-X ↗
6. Numerical Modeling of a Wing Skin Peen Forming Process10.1007/BF02646910 ↗
7. Shot Peening and Peen Forming Finite Element Modelling—Towards a Quantitative Method10.1016/j.ijsolstr.2011.06.003 ↗
8. 3D FE Analysis of Peening of Strain-Rate Sensitive Materials Using Multiple Impingement Model10.1016/S0734-743X(01)00043-4 ↗
9. 1963
10. Relating Almen Intensity to Residual Stresses Induced by Shot Peening: A Numerical Approach10.1016/S0924-0136(00)00893-1 ↗
11. On the Shot Peening Surface Coverage and Its Assessment by Means of Finite Element Simulation: A Critical Review and Some Original Developments10.1016/j.apsusc.2012.07.017 ↗
12. Xia, Q. X., Chen, Z. C., Cheng, X. Q., and Sheng, X. F., 2013, “Calculation Method of Shot Peening Coverage Based on Area Computation for Random Finite Element Model,” International Conference on Mechanical and Automation Engineering (MAEE 2013), Jiujang, China, July 21–23, pp. 22–25.10.1109/MAEE.2013.1510.1109/MAEE.2013.15 ↗
13. Zimmermann, M., Klemenz, M., Schulze, V., and Loehe, D., 2009, “Numerical Studies on the Influence of Thickness on the Residual Stress Development During Shot Peening,” High Performance Computing in Science and Engineering '08, Springer, Berlin, pp. 481–492.10.1007/978-3-540-88303-6_3410.1007/978-3-540-88303-6_34 ↗
14. Potential Applications of Peen Forming Finite Element Modelling10.1016/j.advengsoft.2012.06.006 ↗
15. Modeling the Development of Almen Strip Curvature in Vibratory Finishing10.1016/j.jmatprotec.2008.06.060 ↗
16. Combined Finite/Discrete Element and Explicit/Implicit Simulations of Peen Forming Process10.1108/02644400210413667 ↗
17. Finite Element Modeling of Shot Peening Residual Stress Relaxation in Turbine Disk Assemblies10.1115/1.4030066 ↗
18. Finite Element Analysis of Shot Peening10.1016/S0924-0136(98)00188-5 ↗
19. A Process Model for Shot Peen Forming10.1016/j.jmatprotec.2005.09.006 ↗
20. The Optimisation of Shot Peen Forming Processes10.1016/j.jmatprotec.2007.12.019 ↗
21. On the Effect of the Orientation of Sheet Rolling Direction in Shot Peen Forming10.1016/j.jmatprotec.2013.01.003 ↗
22. On the Effect of the Peening Trajectory in Shot Peen Forming10.1016/j.finel.2013.02.003 ↗
23. Multiple Impact Modelling for Shot Peening and Peen Forming10.1243/09544054JEM1672 ↗
24. Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips10.1115/1.4028006 ↗
25. Peyre, P., Petit, M. A., Bolis, C., Bartnicki, E., Fabbro, R., Chaieb, I., and Braham, C., 2004, “Finite Element Modelling of Laser Peening and Laser Peen Forming of Materials,” 23rd International Congress on Applications of Laser and Electro-Optics (ICALEO), San Francisco, CA, Oct. 4–7.10.2351/1.5060195 ↗
26. Study of the Dynamic Bauschinger Effect in Ti6-Al-4V by Torsion Experiments10.1051/epjconf/20122601023 ↗
27. Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials10.1115/1.2712469 ↗
28. 3-Dimensional Analysis of the Impact Fracture of 4340-Steel10.1016/0020-7683(94)00295-8 ↗
29. Effect of Initial Surface Finish on Effectiveness of Shot Peening Treatment Using Enhanced Periodic Cell Model10.1007/s10999-014-9273-y ↗
30. Effects of Rayleigh Damping, Friction and Rate-Dependency on 3D Residual Stress Simulation of Angled Shot Peening10.1016/j.matdes.2012.09.030 ↗
31. Numerical Modelling of Shot Peening Process and Corresponding Products: Residual Stress, Surface Roughness and Cold Work Prediction10.1016/j.surfcoat.2011.03.080 ↗
32. A Strip Holding System for Finite Element Simulation of Almen Strip Testing10.1007/s12206-014-0636-y ↗
33. Correlation of Almen Arc Height With Residual-Stresses in Shot Peening Process10.1179/mst.1995.11.9.967 ↗
34. Laser Peen Forming Induced Two Way Bending of Thin Sheet Metals and Its Mechanisms10.1063/1.3486218 ↗