journal article·2010-01-01Open access

Development of Strong Surfaces Using Functionally Graded Composites Inspired by Natural Teeth—Finite Element and Experimental Verification

Th. Zisis, A. Kordolemis, A. E. Giannakopoulos

Abstract

Functionally graded materials (FGMs) are composite materials that exhibit a microstructure that varies locally in order to achieve a specific type of local material properties distribution. In recent years, FGMs appear to be more interesting in engineering application since they present an enhanced performance against deformation, fracture, and fatigue. The purpose of the present work is to present evidence of the excellent strength properties of a new graded composite that is inspired by the human teeth. The outer surface of the teeth exhibits high surface strength while it is brittle and wear resistant, whereas the inner part is softer and flexible. The specific variation in Young’s modulus along the thickness of the presented composite is of particular interest in our case. The present work presents a finite element analysis and an experimental verification of an actual composite with elastic modulus that follows approximately the theoretical distribution observed in the teeth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Laboratory for Strength of Materials and Micromechanics, University of Thessaly, Volos 38336, Greece

References (18)

Show source-provided references
1. Graded Materials for Resistance to Contact Deformation and Damage10.1126/science.1059716 ↗
2. Suresh
3. Development of Strong Surfaces Using Functionally Graded Composites Inspired by Natural Teeth—A Theoretical Approach10.1115/1.3184037 ↗
4. Two Dimensional Sliding Frictional Contact of Functionally Graded Materials10.1016/j.euromechsol.2006.05.007 ↗
5. A Variational Approach to the Theory of the Elastic Behavior of Multiphase Materials10.1016/0022-5096(63)90060-7 ↗
6. On Bounds for the Overall Elastic Moduli of Inhomogeneous Systems—I10.1016/0022-5096(66)90035-4 ↗
7. On Bounds for the Overall Elastic Moduli of Inhomogeneous Systems—II10.1016/0022-5096(66)90025-1 ↗
8. A Critical Evaluation for a Class of Micromechanics Models10.1016/0022-5096(90)90005-O ↗
9. Prediction of Elastic Constants of Multiphase Materials
10. Elastic Properties of Two-Phase Composites10.1111/j.1151-2916.1994.tb05390.x ↗
11. Average Stress in Matrix and Average Elastic Energy of Materials With Misfitting Inclusions10.1016/0001-6160(73)90064-3 ↗
12. On the Elastic Moduli of Some Heterogeneous Materials10.1016/0022-5096(65)90011-6 ↗
13. Overall Potentials and Extremal Surfaces of Power Law of Ideally Plastic Composites10.1016/0022-5096(93)90051-G ↗
14. Materials Become Insensitive to Flaws at Nanoscale: Lessons From Nature10.1073/pnas.0631609100 ↗
15. Uniaxial Experiment on Idealized Asphalt Mixes10.1061/(ASCE)0899-1561(2000)12:3(262) ↗
16. Experimental Study of Pure Bitumen in Tension Compression and Shear10.1122/1.550858 ↗
17. A Universal Law of High-Temperature Diffusion Controlled Transient Creep10.1016/0022-5096(70)90018-9 ↗
18. On an Approximate Solution for the Bending of a Beam of Rectangular Cross Section Under Any System of Load With Special Reference to Points of Concentrated or Discontinuous Loading10.1098/rsta.1903.0014 ↗