journal article·2008-07-01

Dispersion Characterization of Nanoclay in Molded Epoxy Disks by Combined Image Analysis and Wavelength Dispersive Spectrometry

Levent Aktas, Youssef K. Hamidi, M. Cengiz Altan

Publisher page

Abstract

The state of nanoclay dispersion in a molded epoxy disk and its effects on the thermomechanical properties of the resulting nanocomposite are analyzed. A commercially available nanoclay, Cloisite® 25A, is mechanically mixed at 2wt% with EPON 815C epoxy resin. The epoxy∕clay compound is then mixed with EPI-CURE 3282 curing agent by a custom made molding setup and injected into a disk shaped mold cavity. Upon completion of curing, nanoclay dispersion is quantified on a sample cut along the radius of the composite disk. Dispersion of nanoclay clusters larger than 1.5μm are analyzed by digital image processing of scanning electron micrographs taken radially along the sample, whereas dispersion at smaller scales is quantified by compositional analysis of clay via wavelength dispersive spectrometry (WDS). Digital images of the microstructure indicate that amount of nanoclay clusters that are larger than 1.5μm remain approximately constant along the radius. However, size analysis of nanoclay clusters revealed that they are broken down into finer clusters along the radius, possibly due to the high shear deformation induced through the thickness during mold filling. Compositional analysis by WDS signified that approximately 0.4wt% of the nanoclay is dispersed to particles smaller than 1.5μm, which are not visible in micrographs. Tensile and three-point bending tests are conducted on additional samples cut from the molded disks. Except for slight reduction in flexural strength, up to 9.5% increase in tensile strength, stiffness, and flexural modulus are observed. Glass transition temperature is determined under oscillatory torsion and observed to increase by 4.5% by the addition of nanoclay.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Aerospace and Mechanical Engineering, University of Oklahoma, Norman, OK 73019

References (36)

Show source-provided references
1. Synthetic Routes, Properties and Future Applications of Polymer—Layered Silicate Nanocomposites10.1023/B:JMSC.0000017753.90222.96 ↗
2. Swelling Behavior of Montmorillonite Cation Exchanged for ω-Amino Acids by ε-Caprolactam10.1557/JMR.1993.1174 ↗
3. Synthesis of Nylon 6—Clay Hybrid10.1557/JMR.1993.1179 ↗
4. Mechanical Properties of Nylon 6—Clay Hybrid10.1557/JMR.1993.1185 ↗
5. Layered Silicate Nanocomposites Based on Various High-Functionality Epoxy Resins. Part II: The Influence of an Organoclay on the Rheological Behavior of Epoxy Prepolymers10.1002/pen.10142 ↗
6. Cure Behavior of Epoxy Resin—Montnorillonite—2-Ethyl-4-Methylimidazole Nanocomposite10.1177/0021998303037014004 ↗
7. Preparation and Linear Rheological Behavior of Polypropylene∕MMT Nanocomposites10.1002/pc.10032 ↗
8. Pinnavaia
9. Clay-Reinforced Epoxy Nanocomposites10.1021/cm00048a006 ↗
10. Clay-Reinforced Epoxy Nanocomposites: Synthesis, Properties and Mechanism of Formation
11. Processing and Properties of Polymeric Nano-Composites10.1002/pen.10899 ↗
12. Mechanical and Thermoviscoelastic Behavior of Clay∕Epoxy Nanocomposites
13. Mechanical and Fracture Properties of Epoxy/Inorganic Micro- and Nano-Composites10.1023/A:1025719715808 ↗
14. Impact Modified Epoxy∕Montmorillonite Nanocomposites: Synthesis and Characterization10.1016/S0032-3861(03)00634-7 ↗
15. Use of Layered Silicates to Supplementarily Toughen High Performance Epoxy—Carbon Fiber Composites10.1023/A:1025703212174 ↗
16. The Relationship Between Nano- and Micro-Structures and Mechanical Properties in PMMA-Epoxy-Nano Clay Composites10.1016/S0032-3861(03)00075-2 ↗
17. Processing of Clay∕Epoxy Nanocomposites With a Three-Roll Mill Machine
18. Epoxy-Aided Dispersion of Nanoclay in PMMA
19. Mechanism of Exfoliation of Nanoclay Particles in Epoxy-Clay Nanocomposites10.1021/ma021509c ↗
20. A Study on Intercalation and Exfoliation of Layered Silicate Nanoparticles in Thermoplastic Polyurethanes
21. Intercalation and Exfoliation Behavior of Epoxy Resin∕Curing Agent∕Montmorillonite Nanocomposite10.1002/app.10354 ↗
22. Nanocomposites Based on Epoxy Resin, Hyperbranched Epoxy Resin, and a Layered Silicate10.1016/j.polymer.2003.08.035 ↗
23. Synthesis of Epoxy-Clay Nanocomposites: Influence of The Nature of the Clay on Structure10.1016/S0032-3861(00)00346-3 ↗
24. The Reflection of X-rays by Crystals10.1098/rspa.1913.0040 ↗
25. A Rheological Method to Compare the Degree of Exfoliation of Nanocomposites10.1016/j.polymer.2003.01.001 ↗
26. Characterisation of Nanoclay Dispersion in Resin Transfer Moulded Glass∕Nanoclay∕Epoxy Composites10.1179/174328904X4918 ↗
28. Effective Pressure on Powders Under Uniaxial Compression10.1023/B:JMSL.0000004644.83683.bf ↗
29. A Method for Correcting the Contact Angle From the θ∕2 Method10.1016/S0927-7757(03)00064-5 ↗
30. Wetting of Compacted Nanoclay Powder by Epoxy Resin10.1115/IMECE2005-80381 ↗
31. Effect of Nanoclay Content on Void Morphology in Resin Transfer Molded Composites10.1177/0892705707083635 ↗
32. Effect of Moisture on The Mechanical Properties of Resin Transfer Molded Composites—Part I: Absorption10.1177/1062065602010004005 ↗
33. Moisture Absorption and Wet-Adhesion Properties of Resin Transfer Molded (RTM) Composites Containing Elastomer-Coated Glass Fibers10.1163/156856103762302014 ↗
34. Middleman
35. Effect of Injection Rate and Post-Fill Cure Pressure on Properties of Resin Transfer Molded Disks10.1177/0021998302036016244 ↗
36. Closed-Form Solution for the Orientation Field in a Center-Gated Disk10.1122/1.550714 ↗