Low-Temperature Sintering of ZnO–TiO2 Ceramics
Source abstract
Abstract
Vanadium pentoxide (V2O5) was chosen as a sintering aid to lower the sintering temperature of the ZnO–TiO2 system. The effect of V2O5 on the sintering behavior and material properties of ZnO–TiO2 ceramics and cermets made of ZnO–TiO2 ceramics and copper (Cu) was investigated as a function of V2O5 percentage and sintering temperature. Densities and hardness of the specimens were improved with an increase of V2O5 up to 2 wt. %. The sintering temperature of the specimens can be reduced to below 1000 °C. The properties of ZnO–TiO2 ceramics and cermets made from ZnO–TiO2 ceramics and Cu with V2O5 are strongly dependent on the sintering temperature. The density of ZnO–TiO2 ceramics and cermets was increased up to 95%, 90% of theoretical density at 900–920 °C, 960–1000 °C, respectively, for 4 hrs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, MO 65211 e-mail:
Fellow ASME Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, MO 65211 e-mail:
School of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China e-mail:
References (18)
Show source-provided references
1. Phase Equilibria in the System ZnO–TiO210.1111/j.1151-2916.1960.tb14326.x ↗
2. Compound Formation and Crystal Structure in the System ZnO–TiO210.1111/j.1151-2916.1961.tb13712.x ↗
3. Formation and Transformation of ZnTiO3
4. Synthesis and Characterization of Zinc Titanate Nano-Crystal Powders by Sol-Gel Technique10.1016/S0022-0248(02)01490-2 ↗
5. Synthesis, Formation and Characterization of ZnTiO3 Ceramics10.1016/j.ceramint.2004.01.002 ↗
6. Low-Fired Microwave Dielectrics in ZnO–TiO2 Ceramics Doped With CuO and B2O310.1023/A:1016044627750 ↗
7. Low Temperature Sintering of (Zn1-x, Mgx)TiO3 Microwave Dielectrics10.1016/j.ceramint.2004.09.017 ↗
8. Perovskite-Type Oxides as Ethanol Sensors10.1016/0022-4596(76)90135-3 ↗
9. Low-Fired (Zn, Mg) TiO3 Microwave Dielectrics10.1111/j.1151-2916.1999.tb02268.x ↗
10. Sintering and Phase Transition of 0.25CuO–0.75MoO3 Doped ZnO–TiO2 Microwave Dielectric Ceramics10.3724/SP.J.1077.2009.00712 ↗
11. Sintering and Microwave Dielectric Properties of LTCC-Zinc Titanate Multilayers
12. Progress in the Study of ZnO–TiO2 Microwave Dielectric Ceramics
13. Microstructure and Microwave Dielectric Properties of Modified Zinc Titanates (I)10.1016/S0025-5408(98)00056-7 ↗
14. Low-Temperature Sintering and Microwave Dielectric Properties of Zinc Metatitanate-Rutile Mixtures Using Boron10.1111/j.1151-2916.1999.tb02200.x ↗
15. Low-Temperature Sintering and Microwave Dielectric Properties of ZnTiO3-Based LTCC Materials
16. 3-D Printing: The New Industrial Revolution10.1016/j.bushor.2011.11.003 ↗
17. 3DP Process for Fine Mesh Structure Printing10.1016/j.powtec.2007.12.017 ↗
18. A Review of Process Development Steps for New Material Systems in Three Dimensional Printing (3DP)10.1016/j.jmapro.2009.03.002 ↗