journal article·2011-10-01

Augmented Cohesive Elements for Efficient Delamination Analyses of Composite Laminates

H. Qiao, W. Q. Chen, Q. D. Yang, J. Lua

Publisher page

Abstract

In this paper, a new type of cohesive element that employs multiple subdomain integration (MSDI) for improved cohesive stress integration accuracy of bonded plate/shell elements has been formulated. Within each subdomain, stress integration is compatible with existing schemes such as Gaussian integration (GI), Newton–Cotes integration, or the mixed Gaussian and subdomain integration (mixed GI&SDI). The numerical accuracy, efficiency, and robustness of this element when employing three integration methods for MSD cohesive stress integration have been evaluated and compared through a benchmark mode-I fracture problem of bonded double-cantilever plates. The MSDI offers at least 50% improvement of numerical accuracy as compared to the best integration method in literature and has the best numerical robustness. This significant improvement pushes the structural mesh size restriction from limiting size of 1/3–1/5 cohesive zone length to 1.5–2 times the cohesive zone length. The formulation is very easy to be implemented into any finite element programs including commercial packages. Furthermore, this formulation enables the use of dual-mesh for delamination analyses of bonded structural shells/plates, which is of practical importance because it greatly reduces the burden of mesh generation for complicated composite structures. It has also been demonstrated that using high-order shell/plate elements can improve the numerical accuracy in general because the nonlinear deformation profile permitted by this type of elements can better describe the nonlinear deformation in the crack-tip element (partially bonded elements).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Numerical methods in engineering · Mechanical Behavior of Composites · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering Mechanics, Zhejiang University, Hangzhou, China 310027

Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL 33124

Global Engineering and Materials, Inc., 1 Airport Place, Suite 1, Suite 200, Princeton, NJ 08540

References (32)

Show source-provided references
1. Numerical Simulations of Adhesively-Bonded Beams Failing With Extensive Plastic Deformation10.1016/S0022-5096(98)00101-X ↗
2. Mixed Mode Fracture of Plastically-Deforming Adhesive Joints10.1023/A:1010869706996 ↗
3. Elastic-Plastic Mode-II Fracture of Adhesive Joints10.1016/S0020-7683(00)00221-3 ↗
4. Discrete Cohesive Zone Model to Simulate Static Fracture in 2D Tri-Axially Braided Carbon Fiber Composites10.1177/0021998306061320 ↗
5. Progressive Damage and Failure Modeling in Notched Laminated Fiber Reinforced Composites10.1007/s10704-009-9370-3 ↗
6. Cohesive Models for Damage Evolution in Laminated Composites10.1007/s10704-005-4729-6 ↗
7. The Role of Delamination in Strength, Failure Mechanism and Hole Size Effect in Open Hole Tensile Tests on Quasi-Isotropic Laminates10.1016/j.compositesa.2008.12.013 ↗
8. Continumm Damage Mechanics, Anisotropy and Damage Deactivation for Brittle Materials Like Concrete and Ceramic Composites10.1177/105678959500400102 ↗
9. On the Interface Debonding Models10.1177/105678959700600302 ↗
10. Characterization and Analysis of Delamination Fracture in Composites: An Overview of Developments from 1990 to 200110.1115/1.1504848 ↗
11. Convergence of Strain-Energy Release Rate Components for Edge Delaminated Composite Laminates10.1016/0013-7944(88)90196-8 ↗
12. Nodal Constraint, Shear Deformation and Continuity Effects Related to the Modeling of Debonding of Laminates Using Shell Elements
13. A Solid Like Shell Element Allowing for Arbitrary Delamination10.1002/nme.v58:13 ↗
14. Remmers, J. C. , 2006, “Discontinuities in Materials and Structures—A Unifying Computational Approach,” Ph.D. thesis, Delft University, Netherlands.
15. Simulation of Low Velocity Impact on Fiber Laminates Using a Cohesive Zone Based Delamination Model10.1016/S0266-3538(03)00256-2 ↗
16. Numerical Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests10.1177/0021998305057432 ↗
17. Experimental Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests10.1177/0021998305053504 ↗
18. Examination of Free Edge Crack Nucleation of Around an Open Hole in Composite Laminates10.1023/A:1016352501824 ↗
19. The Open Hole Tensile Test: A Challenge for Virtual Testing of Composites10.1007/s10704-009-9333-8 ↗
20. A Phantom Node Formulation With Mixed Mode Cohesive Law for Splitting in Laminates10.1007/s10704-009-9344-5 ↗
21. Extended Finite Element Method for Cohesive Crack Growth10.1016/S0013-7944(01)00128-X ↗
22. New Crack-Tip Elements for XFEM and Applications to Cohesive Cracks10.1002/nme.v57:15 ↗
23. Mesh-Independent Discrete Numerical Representations of Cohesive-Zone Models10.1016/j.engfracmech.2005.05.007 ↗
24. High-Fidelity Simulations of Multiple Fracture Processes in a Laminated Composites in Tension10.1016/j.jmps.2011.04.007 ↗
25. An Augmented Finite Element Method for Modeling Arbitrary Discontinuities in Composite Materials10.1007/s10704-009-9347-2 ↗
26. A Mesh-Free Simulation of Cracking and Failure Using the Cohesive Segments Method10.1016/j.ijengsci.2007.03.004 ↗
27. A Meshfree Penalty-Based Approach to Delamination in Composites10.1016/j.compscitech.2009.05.015 ↗
28. Meshless Methods: A Review and Computer Implementation Aspects10.1016/j.matcom.2008.01.003 ↗
29. An Engineering Solution for Mesh Size Effects in the Simulation of Delamination Using Cohesive Zone Models10.1016/j.engfracmech.2006.08.025 ↗
30. Computation of Energy Release Rate and Mode Separation in Delaminated Composite Plate by Using Plate and Interface Variables10.1080/15376490590953563 ↗
31. Effective Simulation of Delamination in Aeronautical Structures Using Shells and Cohesive Elements10.2514/1.32832 ↗
32. An Improved Cohesive Element for Shell Delamination Analyses10.1002/nme.2848 ↗