journal article·2013-04-01

Dynamic Localizations in HSLA-65 and DH-36 Structural Steel at Elevated Temperatures

Farid H. Abed, Fadi Makarem, George Z. Voyiadjis

Publisher page

Abstract

This study addresses the problem of dynamic strain localization in two steel alloys; HSLA-65 and DH-36 at elevated temperatures. It aims at understanding the adiabatic deformation of high strength structural steel by performing a nonlinear finite element (FE) analysis. A microstructural-based viscoplasticity model is integrated and implemented into the commercial FE code ABAQUS/Explicit via the user material subroutine coded as VUMAT. Numerical implementation for a simple compression problem meshed with one element is used for testing the efficiency of the proposed model implementation. The numerical results of the isothermal and adiabatic true stress-true strain curves compare very well with the experimental data for the two steel alloys over a wide range of temperatures and strain rates. The effectiveness of the present approach enables the study of strain localizations in a cylindrical hat-shaped specimen with certain dimensions, where the location of shear localization preceding shear band formation is forced to be between the hat and the brim. The FE simulations of the material instability problems converge to meaningful results upon further refinement of the FE mesh. Material length scales are implicitly introduced into the governing equations through material rate-dependency (viscosity). A sensitivity analysis is also performed on the physically-based viscoplasticity model parameters in order to study their effect on dynamic localizations. Several conclusions related to the width and intensity of the shear localization, considering various velocities and temperatures, are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

e-mail:

Department of Civil Engineering, American University of Sharjah, Sharjah 26666, United Arab Emirates

Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, LA 70803

References (23)

Show source-provided references
1. Material Rate Dependent and Mesh Sensitivity in Localization Problems
2. Dynamic Strain Localization in Elasto-Visco-Plastic Solids. Part 1: General Formulation and 1-D Examples10.1016/0045-7825(90)90073-U ↗
3. Viscoplasticity for Instabilities Due to Strain Softening and Strain-Rate Softening10.1002/(SICI)1097-0207(19971030)40:20<3839::AID-NME245>3.0.CO;2-6 ↗
4. Discontinuous Failure Analysis for Mode-I and Mode-II Localization Problems10.1016/S0020-7683(97)00313-2 ↗
5. Adiabatic Shear Band Localizations in BCC Metals at High Strain Rates and Various Initial Temperatures
6. Characterization and Modeling of Ductile Damage in Structural Steel at Low and Intermediate Strain Rates
7. Thermomechanical Response of DH-36 Structural Steel Over a Wide Range of Strain Rates and Temperatures10.1016/S0167-6636(02)00323-X ↗
8. Thermomechanical Response of HSLA-65 Steel Plates: Experiments and Modeling10.1016/j.mechmat.2003.08.017 ↗
9. Modeling of the Temperature and Strain Rate Dependent Large Deformation of Metals
10. Constitutive Modeling for Ductile Behavior Incorporating Strain Rate, Temperature, and Damage Mechanics10.1016/S0734-743X(01)00063-X ↗
11. A Unified Constitutive Model for Strain-Rate and Temperature Dependent Behavior of Molybdenum10.1016/S0167-6636(01)00076-X ↗
12. A Consistent Modified Zerilli-Armstrong Flow Stress Model for BCC and FCC Metals for Elevated Temperatures10.1007/s00707-004-0203-1 ↗
13. Effect of Dislocation Density Evolution on the Thermomechnical Response of Metals With Different Crystal Structures at Low and High Strain Rates and Temperatures
14. Microstructural Based Models for BCC and FCC Metal With Temperature and Strain Rate Dependency10.1016/j.mechmat.2004.02.003 ↗
15. Plastic Deformation Modeling of Al-6XN Stainless Steel at Low and High Strain Rates and Temperatures Using a Combination of BCC and FCC Mechanism of Metals10.1016/j.ijplas.2004.11.003 ↗
16. Constitutive Modeling of the Mechanical Behavior of High Strength Ferritic Steel for Static and Dynamic Applications10.1007/s11043-010-9112-y ↗
17. Comparisons of Constitutive Models for Steel Over a Wide Range of Temperatures and Strain Rates
18. Implicit Algorithm for Finite Deformation Hypoelastic-Viscoplasticity in FCC Metals10.1002/nme.1655 ↗
19. SIMULA, Inc. · 2010
20. Microstructure of High-Strain, High-Strain-Rate Deformed Tantalum10.1016/S1359-6454(97)00746-5 ↗
21. Microstructural Evolution in Adiabatic Shear Bands in Ta and Ta-W Alloys10.1016/S1359-6454(01)00215-4 ↗
22. An Experimental and Numerical Study of the Localization Behavior of Tantalum and Stainless Steel10.1016/j.ijplas.2005.10.002 ↗
23. Johnson, C., and Cook, W., 1983, “A Constitutive Modeling and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,” Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, April 19–21.