journal article·2012-01-01

Atomistic-Continuum Modeling of the Mechanical Properties of Silica/Epoxy Nanocomposite

Bohayra Mortazavi, Julien Bardon, Said Ahzi, Akbar Ghazavizadeh, Yves Rémond, David Ruch

Publisher page

Abstract

In this study, a hierarchical multiscale homogenization procedure aimed at predicting the effective mechanical properties of silica/epoxy nanocomposites is presented. First, the mechanical properties of the amorphous silica nanoparticles are investigated by means of molecular dynamics (MD) simulations. At this stage, the MD modeling of three-axial tensile loading of amorphous silica is carried out to estimate the elastic properties. Second, the conventional twp phase homogenization techniques such as finite elements (FE), Mori-Tanaka (M-T), Voigt and Reuss methods are implemented to evaluate the overall mechanical properties of the silica/epoxy nanocomposite at different temperatures and at constant weight ratio of 5%. At this point, the mechanical properties of silica obtained in the first stage are used as the inputs of the reinforcing phase. Comparison of the FE and M-T results with the experimental results in a wide range of temperatures reveals fine agreement; however, the FE results are in better agreement with the experiments than those obtained by M-T approach. Additionally, the results predicted by FE and M-T methods are closer to the lower bound (Reuss), which is due to lowest surface to volume ratio of spherical particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre de Recherche Public Henri Tudor, Department of Advanced Materials and Structures, 66, rue de Luxembourg BP 144, L-4002 Esch/Alzette, Luxembourg; Institut de Mécanique des Fluides et des Solides, University of Strasbourg/CNRS, 2 Rue Boussingault, 67000 Strasbourg, France

Centre de Recherche Public Henri Tudor, Department of Advanced Materials and Structures, 66, rue de Luxembourg BP 144, L-4002 Esch/Alzette, Luxembourg

Institut de Mécanique des Fluides et des Solides, University of Strasbourg/CNRS, 2 Rue Boussingault, 67000 Strasbourg, France

References (26)

Show source-provided references
1. Piggott
2. Mechanics of the Interface for Carbon Nanotube–Polymer Composites10.1016/j.tws.2005.07.003 ↗
3. The Fracture and Fatigue Behaviour of Nano-Modified Epoxy Polymers10.1007/s10853-007-1768-6 ↗
4. Effect of Sub-Micron Silica Fillers on the Mechanical Performances of Epoxy-Based Composites10.1016/j.polymer.2007.01.053 ↗
5. Influence of TiO2 and Fe2O3 Fillers on the Thermal Properties of Poly(Methyl Methacrylate) (PMMA)10.1016/j.matlet.2004.09.014 ↗
6. Property Improvements of In Situ Epoxy Nanocomposites With Reduced Interparticle Distance at High Nanosilica Content10.1016/j.actamat.2005.12.009 ↗
7. Effect of PPO-g-MA on Structures and Properties of PPO/PA6/Short Glass Fiber Composites10.1002/polb.21815 ↗
8. Preparation and Characterization of Epoxy Composites Filled With Functionalized Nanosilica Particles Obtained via Sol–Gel Process10.1016/S0032-3861(00)00392-X ↗
9. Fracture Behaviours of In Situ Silica Nanoparticle-Filled Epoxy at Different Temperature10.1016/j.polymer.2008.06.040 ↗
10. Modelling Stiffness of Polymer/Clay Nanocomposites10.1016/j.polymer.2006.11.062 ↗
11. Torquato
12. Three-Phase Solid Oxide Fuel Cell Anode Microstructure Realization Using Two-Point Correlation Functions10.1016/j.actamat.2010.08.012 ↗
13. 3D Reconstruction of Carbon Nanotube Composite Microstructure Using Correlation Functions10.1166/jctn.2010.1504 ↗
14. Haile
15. Molecular Dynamics Investigation of Loading Rate Effects on Mechanical-Failure Behaviour of FCC Metals10.1166/jctn.2009.1087 ↗
16. A study on the Nanoindentation Behaviour of Single Crystal Silicon Using Hybrid MD-FE Method10.4028/www.scientific.net/AMR.32.259 ↗
17. Prediction of Cutting Forces in the Micro-Machining of Silicon Using a ‘hybrid molecular dynamic-finite element analysis’ force model10.1016/j.ijmachtools.2005.12.008 ↗
18. Use of Functionalized Nanosilica to Improve Thermo-Mechanical Properties of Epoxy Adhesive Joint Bonding Aluminium Substrates10.1166/jnn.2010.1458 ↗
19. Force Fields for Silicas and Aluminophosphates Based on Ab Initio Calculations10.1103/PhysRevLett.64.1955 ↗
20. Interstitial Voids in Silica Melts and Implication for Argon Solubility Under High Pressures10.1016/j.gca.2010.04.017 ↗
21. Void Size Distribution in MD-Modelled Silica Glass Structures10.1016/j.jnoncrysol.2005.11.022 ↗
22. Molecular Dynamics Studies of Brittle Fracture in Vitreous Silica: Review and Recent Progress10.1016/j.jnoncrysol.2005.03.026 ↗
23. Average Stress in Matrix and Average Elastic Energy of Materials With Misfitting Inclusions10.1016/0001-6160(73)90064-3 ↗
24. A New Approach to the Application of Mori-Tanaka’s Theory in Composite Materials10.1016/0167-6636(87)90005-6 ↗
25. Modeling of the Mechanical Properties of Nanoparticle/Polymer Composites10.1016/j.polymer.2004.11.022 ↗
26. Investigation of the Interphase Effects on the Mechanical Behavior of Carbon Nanotube Polymer Composites by Multiscale Modeling10.1002/app.31460 ↗