Single-Edge and Double-Edge Cracks in a Fully Anisotropic Strip
Source abstract
Abstract
The mode I and II stress intensity factors in a fully anisotropic infinite strip with a single-edge or double-edge crack configuration are obtained from an approach based on the continuous dislocation technique. The elastic solution of a single dislocation in an anisotropic half plane is used in conjunction with an array of dislocations along the boundary of the infinite strip, which is supposed to be traction-free, to provide the solution of a single dislocation in an anisotropic infinite strip. The dislocation densities of the dislocation array are determined in such a way that the traction forces generated by the dislocation array cancel the residual tractions along the boundary due to the single dislocation in the half plane. The stress field of a single dislocation in the infinite strip is thus a superposition of that of the single dislocation and the dislocation array in the half plane. This solution is then applied to calculate the mixed mode I and II stress intensity factors for a single-edge and a double-edge crack in the anisotropic strip, by replacing the cracks with a series of dislocations and satisfying the crack surface traction-free conditions. To illustrate the results, typical material data for graphite/epoxy were used in a unidirectional construction with the fiber orientation, θ, measured from the load direction (perpendicular to the crack direction), varying between 0 and 90 degrees. It is found that the effect of anisotropy on the mode I stress intensity factor is significant between 30 and 60 degrees and depends strongly on the relative crack length, being larger for cracks of relative larger length. The mode mixity, defined such that it is zero for pure mode I and 90 degrees for pure mode II, is significant between 40 and 70 degrees, and is in general between zero and 20 degrees.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0150
References (17)
Show source-provided references
1. Bueckner H. F. , 1958, “The Propagation of Cracks and the Energy of Elastic Deformation,” ASME Journal of Applied Mechanics, Vol. 80, pp. 1225–1230.10.1115/1.4012657 ↗
2. Cartwright D. J. , and RookeD. P., 1975, “Evaluation of Stress Intensity Factors,” J. of Strain Analysis, Vol. 10, No. 4, pp. 217–262.10.1243/03093247V104217 ↗
3. Civelek M. B. , and ErdoganF., 1982, “Crack Problems for a Rectangular Plate and an Infinite Strip,” Int. J. of Fract., Vol. 19, pp. 139–159.10.1007/BF00016570 ↗
4. Civelek, M. B., 1985, “Stress Intensity Factors for a System of Cracks in an Infinite Strip,” Fracture Mechanics, Sixteenth Symposium, ASTM, Philadelphia, pp. 7–26.10.1520/STP34243S ↗
5. Georgiadis H. G. , and PapadopoulosG. A., 1987, “Determination of SIF in a Cracked Plane Orthotropic Strip by the Wiener-Hopf Technique,” Int. J. Fract., Vol. 34, pp. 57–64.10.1007/BF00042124 ↗
6. Georgiadis H. G. , and PapadopoulosG. A., 1988, “Cracked Orthotropic Strip with Clamped Boundaries,” J. Appl. Math. Phys. (ZAMP), Vol. 39, pp. 573–578.10.1007/BF00948963 ↗
7. Gupta, G. D., and Erdogan, F., 1974, “The Problem of Edge Cracks in an Infinite Strip,” ASME Journal of Applied Mechanics, Dec., pp.1001–1006.10.1115/1.3423423 ↗
8. Hills, D. A., Kelly, P. A., Di, D. N., and Korsunsky, A. M., 1996, Solution of Crack Problems; the Distributed Dislocation Technique, Kluwer Academic, U.K.10.1007/978-94-015-8648-1_2 ↗
9. Lee J. C. , 1990, “Analysis of a Fiber Bridged Crack Near a Free Surface in Ceramic Matrix Composites,” Eng. Fract. Mech., Vol. 37, No. 1, pp. 209–219.10.1016/0013-7944(90)90344-G ↗
10. Lekhnitskii, S. G., 1981, Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow.
11. Pelegri, A. A., and Kardomateas, G. A., 1998, “Intralayer Cracking in Delaminated Glass/Epoxy and Graphite/Epoxy Laminates Under Cyclic or Monotonic Loading,” Proceedings, 39th AIAA/ASME/ASCE/AHS/ASC SDM Conference, April 20–23, Long Beach, CA, pp.1534–1544, Paper no. AIAA-98-1879.
12. Qian W. , and SunC. T., 1997, “Calculation of Stress Intensity Factors for Interlaminar Cracks in Composite Laminates,” Composite Science and Technology, Vol. 57, pp. 637–650.10.1016/S0266-3538(97)00006-7 ↗
13. Stroh A. N. , 1958, “Dislocations and Cracks in Anisotropic Elasticity,” Philosophical Magazine, Vol. 3, pp. 625–646.10.1080/14786435808565804 ↗
14. Suo Z. , and HutchinsonJ. W., 1990, “Interface Crack between Two Elastic Layers,” Inter. J. of Fracture, Vol. 43, pp. 1–18.10.1007/BF00018123 ↗
15. Suo Z. , 1990, “Delamination Specimens for Orthotropic Materials,” ASME Journal of Applied Mechanics, Vol. 57, Sep., pp. 627–634.10.1115/1.2897068 ↗
16. Tada, H., Paris, P. C., and Irwin, G. R., 1985, The Stress Analysis of Cracks Handbook, 2nd Edition, Paris Productions, St. Louis.
17. Thouless M. D. , EvansA. G., AshbyM. F., and HutchinsonJ. W., 1987, “The Edge Cracking and Spalling of Brittle Plates,” Acta. Meta., Vol. 35, No. 6, pp. 1333–1341.10.1016/0001-6160(87)90015-0 ↗