The Effect of Process Parameters on the Structural Energetic Properties of Additively Manufactured Reactive Structures
Source abstract
Abstract
Abstract This paper investigates the ability of an aluminum-fluoropolymer energetic material to act as a multifunctional energetic structural material (MESM). The mechanical properties of the material were determined by performing quasi-static tensile testing of 3D printed dogbones. Samples were prepared with and without particle loading, as well as with different print directions, in order to gain a fundamental understanding of how these parameters affect the mechanical properties of the material. Larger truss samples were printed in order to simulate realistic structural elements. Samples were printed in different directions and burned to determine this parameter’s effect on the combustion performance of the material. The aluminum polyvinylidene fluoride mixtures considered were shown to have viable structural capabilities as well as sufficient combustion performance. The structural energetic capabilities of the formulations considered, paired with the material’s ability to be 3D printed, could enable a number of interesting applications in the aerospace and defense industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Additive Manufacturing and 3D Printing Technologies · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Ray W. Herrick Laboratories, Purdue University, West Lafayette, IN 47907
School of Mechanical Engineering, Maurice J. Zucrow Laboratories, Purdue University, West Lafayette, IN 47907
School of Mechanical Engineering, Ray W. Herrick Laboratories, Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907
References (22)
Show source-provided references
1. A Review of Additive Manufacturing10.5402/2012/208760 ↗
2. A Review of Melt Extrusion Additive Manufacturing Processes: I. Process Design and Modeling10.1108/RPJ-01-2013-0012 ↗
3. A Review of Melt Extrusion Additive Manufacturing Processes: II. Materials, Dimensional Accuracy, and Surface Roughness10.1108/RPJ-02-2013-0017 ↗
4. Additive Manufacturing of PLA Structures Using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties and Their Optimal Selection10.1016/j.matdes.2017.03.065 ↗
5. Design of Fused-Deposition ABS Components for Stiffness and Strength10.1115/1.1582499 ↗
6. Mechanical Behavior of Acrylonitrile Butadiene Styrene (ABS) Fused Deposition Materials. Experimental Investigation10.1108/13552540110395547 ↗
7. Additive Manufacturing of Multifunctional Reactive Materials
8. Preliminary Design of Multifunctional Structural-Energetic Materials for High Density, High Strength and Release of High Enthalpic Energy
9. Experimental Study on Impact-Initiated Characters of Multifunctional Energetic Structural Materials10.1063/1.4793281 ↗
10. Mechanical Behavior of Nickel+Aluminum Powder-Reinforced Epoxy Composite10.1016/j.msea.2006.08.106 ↗
11. Sensitivity and Performance of Energetic Materials10.1002/prep.201500351 ↗
12. Impact Ignition of Aluminum-Teflon Based Energetic Materials Impregnated With Nano-Structured Carbon Additives10.1063/1.4737118 ↗
13. Impact Sensitivity of Intermetallic Nanocomposites: A Study on Compositional and Bulk Density10.1016/j.intermet.2010.04.015 ↗
14. Fluorine-Containing Oxidizers for Metal Fuels in Energetic Formulations
15. Deposition and Characterization of Energetic Thin Films10.1016/j.combustflame.2013.10.027 ↗
16. Electrospray Deposition of Energetic Polymer Nanocomposites With High Mass Particle Loadings: A Prelude to 3D Printing of Rocket Motors10.1002/adem.201400151 ↗
17. Direct-Deposition to Create High Particle Loading Propellants With Controlled Architecture: Combustion and Mechanical Properties
18. 3D Printing and Development of Fluoropolymer Based Reactive Inks10.1002/adem.201700390 ↗
19. Mezger · 2017 · 115
20. 3D Printing Multifunctional Fluorinated Nanocomposites: Tuning Electroactivity, Rheology and Chemical Reactivity10.1039/C8TA00127H ↗
21. ASTM Standard D638 · 2014
22. ASTM Standard 7264 · 2015