Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Effect of Environment on Mechanical Properties and Moisture Uptake
Source abstract
Abstract
The environmental stability of three room temperature cure epoxy adhesives was evaluated following exposure to temperatures of 20°C, 30°C, and 50°C at 95%RH, to 50°C in air and soaked in water for up to 90 days. The adhesives contained nano- and microparticles and were especially formulated for bonded-in timber connections, and the properties of bulk adhesives and adhesively bonded block shear specimens were evaluated. After 90 days of aging the results demonstrate critical temperature effects controlled by the glass transition temperature. The apparent free volume for all the adhesives remains constant as moisture is absorbed but plasticization takes place at high temperature and relative humidity, evidenced by the increased elongation and yield observed by strain values and scanning electron microscope. Exposure at 50°C in air causes the adhesives to postcure enhancing strength but high humidity causes degradation. Nanofiller additions enhance environmental stability but the addition of microparticles provides better moisture resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Civil Engineering, University Technology Mara Malaysia, Shah Alam, Selangor 40450, Malaysia
Department of Mechanical Engineering, Materials Research Centre, University of Bath, Avon BA2 7AY, UK
Rotafix (Northern) Limited, Rotafix House, Abercraf, Swansea SA9 1UR, UK
References (24)
Show source-provided references
1. Environmental Failure of Structural Adhesive Joints10.1080/00218467408075035 ↗
2. Investigation of Hydrothermal Ageing of a Filled Rubber Toughened Epoxy Resin Using Dynamic Mechanical Thermal Analysis and Dielectric Spectroscopy10.1016/S0032-3861(00)00042-2 ↗
3. Effect of Thermal History on Water Sorption, Elastic Properties and Glass Transition of Epoxy Resins10.1016/0032-3861(79)90307-0 ↗
4. The Effect of Network Structure on Moisture Absorption of Epoxy Resins10.1002/app.1981.070260917 ↗
5. The Effect of Glass Transition Temperature of Poly(Methyl Methacrylate)10.1016/0032-3861(88)90405-3 ↗
6. Irreversible Effects of Moisture on the Epoxy Matrix in Glass-Reinforced Composites10.1002/pol.1981.180190202 ↗
7. Modelling Anomalous Moisture Uptake, Swelling and Thermal Characteristics of a Rubber Toughened Epoxy Adhesive10.1016/j.ijadhadh.2004.02.002 ↗
8. Interfacial Fracture Mechanical Aspects of Adhesive Bonded Joints—Review10.1080/00218467908544625 ↗
9. The Effect of Humidity on the Durability of Aluminium-Epoxide Joints10.1016/0143-7496(90)90042-V ↗
10. Thermal-Expansion and Swelling of Cured Epoxy-Resin Used in Graphite-Epoxy Composite-Materials10.1007/BF00550593 ↗
11. Moisture Absorption Characteristics of Rubber Particulate Filled Epoxy Adhesives10.1007/BF01105687 ↗
12. A Test Method for Accelerated Humidity Conditioning and Estimation of Adhesive Bond Durability10.1080/00218469708014416 ↗
13. Degradation of Epoxy Coatings in Humid Environments—The Critical Relative-Humidity for Adhesion Loss10.1163/156856191X00152 ↗
14. Effect of Moisture on the Static and Viscoelastic Shear Properties of Epoxy Adhesives10.1007/BF00553063 ↗
15. Durability of Structural Adhesive Bonds—Review
16. Influence of Nanofillers on the Thermal and Mechanical Behaviour of DGEBA-Based Adhesives for Bonded-In Timber Connections10.1007/s11029-006-0052-1 ↗
17. Ahmad, Z., Ansell, M. P., and Smedley, D., 2010, “Effect of Nano- and Micro-Particle Additions on Moisture Absorption in Thixotropic Room Temperature Cure Epoxy-Based Adhesives for Bonded-In Timber Connections,” Int. J. Adhes. Adhes.0143-7496, in press.10.1016/j.ijadhadh.2010.04.001 ↗
18. Epoxy-Water Interactions10.1002/pen.760200417 ↗
19. Silicon-29 Solid-State Nuclear Magnetic Resonance Spectroscopy of Composite Interfaces10.1002/pc.750110208 ↗
20. Correlations Between Types of Absorbed Water Molecules and Water Permeability in Swollen Polymer Membranes
21. Characterization of the Morphological Fine-Structure of Commercial Thermosetting Resins Through Hygrothermal Experiments10.1007/3-540-13779-3_21 ↗
22. Relation of Swelling and Tg Depression to the Apparent Free Volume of a Particle-Filled, Epoxy-Based Adhesive10.1002/app.11576 ↗
23. Environmental Stability of DGEBA-Based Epoxy Adhesive Reinforced With Nano- and Micro Filler Additions for Bonded-In Timber Connections
24. Effect of Timber Moisture Content on Bonded-In Rods10.1016/S0950-0618(00)00066-0 ↗