journal article·2011-07-01

Effect of Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength

Scott F. Miller, Senthil G. Arul, Grant H. Kruger, Tsung-Yu Pan, Albert J. Shih

Publisher page

Abstract

In this study, metal particles were added during the spot friction welding (SFW) process, a solid state sheet metal joining process, to create a localized metal matrix composite (MMC) for the improvement of lap shear strength in AISI 6111-T4 aluminum alloy sheets. The Ancorsteel® 1000 particles were compressed between the upper and lower sheets and distributed concentrically around the tool axis perpendicular to the plate surface, which formed a localized MMC and were effective as the reinforcement particles in aluminum 6111-T4 alloy sheets. Results revealed that the MMC reinforcement improved the lap shear strength of SFW joints by about 25%. An aluminum-ferrous solid solution was formed around the steel particles along the aluminum matrix interface. The load-deflection curve shows that the steel particle MMC increased both the strength and ductility of SFW joint. This is attributed to two phenomena observed on the failed lap shear tensile specimens with SFW MMC. One is the longer and more torturous crack path, and the other is the secondary crack on steel particle MMC reinforced SFW joints.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering, University of Hawaii at Manoa, Honolulu, HI 96822

Department of Navy, Naval Sea Systems Command, Washington, DC 20376

Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109

Oak Ridge National Lab, Oak Ridge, TN 37831

References (24)

Show source-provided references
1. Chawla
2. Suresh
3. Friction Stir Processing: A Novel Technique for Fabrication of Surface Composite10.1016/S0921-5093(02)00199-5 ↗
4. A Novel Way to Produce Bulk Sicp Reinforced Aluminum Metal Matrix Composites by Friction Stir Processing10.1016/j.jmatprotec.2008.05.001 ↗
5. Fusion and Stir Welding of Aluminum-Metal-Matrix Composites10.1007/s11661-005-0093-4 ↗
6. Effects of Failure Modes on Strength of Aluminum Resistance Spot Welds10.4271/2005-01-0906 ↗
7. Aluminum Spot Weld
8. Static and Fatigue Behavior of Spot-Welded 5182-0 Aluminum Alloy Sheet
9. Effect of Tool Geometry on Hook Formation and Static Strength of Friction Stir Spot Welded Aluminum 5754-O Sheets10.1016/j.ijmachtools.2009.06.001 ↗
10. Effect of Welding Parameters on Properties of 5052 Al Friction Stir Spot Welds10.4271/2006-01-0969 ↗
11. Development of Spot FSW Robot System for Automobile Body Members
12. An Experimental Study of Joint Performance in Spot Friction Welding of 6111-T4 Aluminum Alloy10.1179/136217108X363900 ↗
13. Damage Analysis of Aluminum Matrix Composite Considering Non-Uniform Distribution of SiC Particles10.1016/S1359-6454(98)00004-4 ↗
14. Particle Reinforcement of Ductile Matrices Against Plastic Flow and Creep10.1016/0956-7151(91)90156-U ↗
15. Effects of Reinforcement Content and Shape of Cavitation and Failure in Metal-Matrix Composites10.1016/0010-4361(93)90172-5 ↗
16. Ancorsteel® datasheet, 1001 Taylor Lane, Cinnaminson, NJ 08077-2017, www.hoeganaes.com
17. Spot Friction Weld Strength Improvement Through In-Process Metal Matrix Formation10.1115/MSEC_ICMP2008-72502 ↗
18. Particle Fracture, Retention and Fluid Flow in Metal Matrix Composite Friction Joints10.1007/s11661-997-0194-3 ↗
19. Structure-Properties Relations in Spot Friction Welded (also Known as Friction Stir Spot Welded) 6111 Aluminum10.1016/j.msea.2006.06.126 ↗
20. Material Flow During Friction Stir Spot Welding10.1179/174329306X77056 ↗
21. Effect of Welding Condition on Tensile Strength of Dissimilar FS Spot Welds Between Different Al Alloys
22. Friction Stir Spot Welding of Automotive Lightweight Alloys
23. Simulation of Crack Propagating in Discontinuously Reinforced Metal Matrix Composite10.1007/s11661-997-0173-8 ↗
24. High Temperature Creep Behavior of Nanometric Si2N4 Particulate Reinforced Aluminum Composite10.1016/S0921-5093(96)10870-4 ↗