Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD
Source abstract
Abstract
Various methods for the production of bulk nanostructured (NS)/ultrafine-grained (UFG) materials have been developed, including equal channel angular extrusion (ECAE), a form of severe plastic deformation. Using an ECAE NS/UFG copper bar as an example, this study has investigated machining-induced workpiece microstructure variation using X-ray diffraction. It has been found that (1) under gentle cutting conditions, there was a 10% increase in the median grain size compared with unmachined ECAE NS/UFG copper bars. Increases in the arithmetic-, area-, and volume-weighted grain sizes were found to be 10%, 8%, and 8%, respectively, and (2) an average 27% drop in the dislocation density was observed between the machined and unmachined ECAE copper bars. The dislocation density was shown to have the most reduction (−39%) at the outer radius of the machined ECAE bar where more heat and/or higher pressure were experienced.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921
References (26)
Show source-provided references
1. Diffusion and Related Phenomena in Bulk Nanostructured Materials10.1016/S1468-6996(01)00071-7 ↗
2. Metals and Alloys Nanostructured by Severe Plastic Deformation: Commercialization Pathways10.1007/s11837-006-0212-8 ↗
3. Bulk Nanostructured Materials From Severe Plastic Deformation10.1016/S0079-6425(99)00007-9 ↗
4. Processing of a Low-Carbon Steel by Equal-Channel Angular Pressing10.1016/S1359-6454(01)00441-4 ↗
5. Microstructure Evolution and Mechanical Behavior of Bulk Copper Obtained by Consolidation of Micro- and Nanopowders Using Equal Channel Angular Extrusion10.1007/s11661-004-0241-2 ↗
6. Review Processing of Metals by Equal-Channel Angular Pressing10.1023/A:1017932417043 ↗
7. Experimental Investigation of the Machinability of Equal Channel Angular Pressing Processed Commercially Pure Titanium
8. Machinability of Ultrafine-Grained Copper Using Tungsten Carbide and Polycrystalline Diamond Tools10.1016/j.ijmachtools.2006.03.014 ↗
9. Structure and Mechanical Properties of Ultrafine-Grained Metals
10. 2004, Kennametal Lathe Tooling, Catalog 1010, Latrobe, PA.
11. Crystallite Size Distribution and Dislocation Structure Determined by Diffraction Profile Analysis: Principles and Practical Application to Cubic and Hexagonal Crystals10.1107/S0021889801003715 ↗
12. Dislocation Structure and Crystallite Size in Severely Deformed Copper by X-Ray Peak Profile Analysis
13. The Meaning of Size Obtained From Broadened X-Ray Diffraction Peaks10.1002/adem.200310086 ↗
14. The Effect of Cold-Work Distortion on X-Ray Patterns10.1063/1.1699713 ↗
15. X-Ray Line Broadening From Filled Aluminum and Wolfram10.1016/0001-6160(53)90006-6 ↗
16. The Density and the Character of Dislocations in Cubic and Hexagonal Polycrystals Determined by X-Ray Diffraction
17. Characterizations of the Microstructure of Severely Deformed Titanium by X-Ray Diffraction Profile Analysis10.4028/www.scientific.net/MSF.414-415.229 ↗
18. Line Broadening Analysis Using Integral Breadth Methods: A Critical Review10.1107/S0021889804004583 ↗
19. MWP-Fit: A Program for Multiple Whole-Profile Fitting of Diffraction Peak Profiles by Ab Initio Theoretical Functions10.1107/S0021889801011451 ↗
20. Estimating Grain-Size Distributions in Nanocrystalline Materials From X-Ray Diffraction Profile Analysis10.1080/01418619808224072 ↗
21. Particle-Size, Size Distribution and Dislocations in Nanocrystalline Tungsten-Carbide10.1016/S0965-9773(99)00023-9 ↗
22. Particle Size Distribution and Dislocation Density Determined by High Resolution X-Ray Diffraction in Nanocrystalline Silicon Nitride Powders10.1016/S0921-5093(99)00702-9 ↗
23. Microstructure of Severely Deformed Metals Determined by X-Ray Peak Profile Analysis10.1016/j.jallcom.2003.11.162 ↗
24. Hinds
25. Microstructural Parameters From X-Ray Diffraction Peak Broadening10.1016/j.scriptamat.2004.05.007 ↗
26. Nanostructures in Ti Processed by Severe Plastic Deformation10.1557/JMR.2003.0267 ↗