journal article·2009-04-01

Failure Analysis of a Fibrous Composite Half-Space Subjected to Uniform Surface Line Load

Suhasini Gururaja, Mamidala Ramulu

Publisher page

Abstract

Abstract Unidirectional fiber-reinforced plastic (UD-FRP) laminates have been modeled previously as an equivalent quasihomogeneous monoclinic half-space subjected to an inclined line load on the surface using Lekhnitskii’s formulation simulating the orthogonal edge trimming loads in UD-FRPs. In continuation, failure analysis of the aforementioned composite half-space has been carried out in the present investigation based on Tsai–Wu criterion. In particular, the failure behavior of the half-space laminate with respect to the fiber orientation, load inclination angle, and spatial coordinates has been examined in detail. The motivation behind such a study lies in correlating the failure behavior of the half-space laminate with the machining damage observed during orthogonal edge trimming experiments. The present work strives at identifying this relationship and, in the process, understanding the physics of orthogonal cutting of UD-FRP laminates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced machining processes and optimization · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Boeing Company, Seattle, WA 98195

Department of Mechanical Engineering, University of Washington, Seattle, WA 98195

References (24)

Show source-provided references
1. Machining of Composite Materials10.1016/S0007-8506(07)61703-X ↗
2. Orthogonal Cutting Mechanisms of Graphite/Epoxy Composite. Part 1: Unidirectional Laminate10.1016/0890-6955(95)00014-O ↗
3. Orthogonal Cutting Mechanisms of Graphite/Epoxy Composite. Part 2: Multi-Directional Laminate10.1016/0890-6955(95)00015-P ↗
4. Influence of Fiber on the Cutting Stress State in Machining Idealized Glass Fiber Composite10.1243/0309324971513184 ↗
5. Investigation of Stresses in the Orthogonal Cutting of Fiber-Reinforced Plastics10.1007/BF02328695 ↗
6. Wern, C. W. , 1995, “Fiber and Fiber-Matrix Interface Effects on the Orthogonal Cutting of Fiber-Reinforced Plastics,” Ph.D. thesis, University of Washington, Seattle, WA.
7. Gururaja, S. , 2008, “Stress Analysis of Machining Damage in Laminated Polymer Composites,” Ph.D. thesis, University of Washington, Seattle, WA.
8. Stress Distribution Due to Inclined Line Loads in Fibrous Polymer Composites
9. Lekhnitskii
10. Muskhelishvelli
11. Gdoutos
12. Predicting Failure in Composite Laminates: The Background to the Exercise10.1016/S0266-3538(98)00074-8 ↗
13. A General Theory of Strength for Anisotropic Materials10.1177/002199837100500106 ↗
14. Orthogonal Cutting of Fiber-Reinforced Composites: A Finite Element Analysis10.1016/S0020-7403(96)00061-6 ↗
15. Finite Element Modeling of Edge Trimming Fiber Reinforced Plastics10.1115/1.1428329 ↗
16. Determination of Machining-Induced Damage Characteristics of Fiber Reinforced Plastic Composite Laminates10.1081/AMP-200035177 ↗
17. Subsurface Stress Fields in Face-Centered-Cubic Single-Crystal Anisotropic Contacts10.1115/1.2180276 ↗
18. Herakovich
19. Polynomial Theory of Strength for Composite Materials Reduction in the Number of Independent Parameters for the Tsai–Wu Tensor10.1177/002199803035183 ↗
20. Damage Identification in a Composite Plate Using Prestack Reverse-Time Migration Technique10.1177/1475921705055233 ↗
21. Progressive Damage Analyses of Skin/Stringer Debonding
22. On the Sliding Friction Characteristics of Unidirectional FRP Composites10.1115/1.1398295 ↗
23. The Number of Elastic Properties and Failure Parameters for Fiber Composites10.1115/1.2806997 ↗
24. Analysis of Composite Materials–A Survey10.1115/1.3167081 ↗