journal article·2021-01-01

Multifunctional Fused Deposition Modeled Acrylonitrile Butadiene Styrene-Based Structures With Embedded Conductive Channels

George Youssef, Jordan Smilo, Aryan Blourchian, Nha Uyen Huynh, Arbi V. Karapetian

Publisher page

Abstract

Abstract The applicability of additive manufacturing (AM) continues to expand because of research and development efforts in industrial, academic, and governmental institutions. The lure of additive manufacturing lies in the quick time-to-market and ability to produce parts and components with high degrees of topographical complexity empowered by the layer-by-layer production approach. One challenge that is attracting a significant amount of attention is improving the multi-functionality of additively manufactured parts, as enabling multi-functionality will result in transitioning AM to a broader application domain. The objective of this paper is to report novel developments that improve the functionality of polymer-based parts by adding electrical conductivity and fluid management to the existing load-bearing capabilities. A space structure was 3D-printed using acrylonitrile butadiene styrene (ABS) with embedded internal channels throughout the entire structure and then sealed using an acetone-diluted epoxy. The inner surfaces of the embedded channels of the sealed structure were then metallized using an electroless silver-coating process; these processes were found to be robust and independent of the inner diameter and length of the structure. The electromechanical performance of the structure was verified by applying mechanical loading while monitoring the change in electrical resistivity. The latter was found to remain nearly constant up to the point of ultimate mechanical failure. Finite element modeling was used to identify the areas of structural weaknesses and assist in elucidating the failure modes. The results were found to be in good agreement with the experimental data.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, San Diego State University, 5500 Campanile Dr., San Diego, CA 92182

Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109

Funding

NSF

References (22)

Show source-provided references
1. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges10.1016/j.compositesb.2018.02.012 ↗
2. Anisotropic Material Properties of Fused Deposition Modeling ABS10.1108/13552540210441166 ↗
3. How Additive Manufacturing Technology Changes Business Models?—Review of Literature
4. Anisotropy of Thermal Conductivity in 3D Printed Polymer Matrix Composites for Space Based Cube Satellites
5. Analyzing the Tensile, Compressive, and Flexural Properties of 3D Printed ABS P430 Plastic Based on Printing Orientation Using Fused Deposition Modeling
6. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments10.1108/13552540810862028 ↗
7. Introduction to SLA 3D Printing
8. Designing and Production of Polymer Product With Fused Deposition Modelling—Case Study
9. Shape Deposition Manufacturing of Heterogeneous Structures10.1016/S0278-6125(97)89095-4 ↗
10. Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography10.1108/13552540110410459 ↗
11. Integrating Stereolithography and Direct Print Technologies for 3D Structural Electronics Fabrication10.1108/13552541211212113 ↗
12. Integration of Direct-Write (DW) and Ultrasonic Consolidation (UC) Technologies to Create Advanced Structures with Embedded Electrical Circuitry
13. Integrated 3D Printing and Corona Poling Process of PVDF Piezoelectric Films for Pressure Sensor Application10.1088/1361-665X/aa738e ↗
14. Current Progress in 3D Printing for Cardiovascular Tissue Engineering10.1088/1748-6041/10/3/034002 ↗
15. Property-Map of Epoxy-Treated and As-Printed Polymeric Additively Manufactured Materials10.1016/j.ijmecsci.2020.105767 ↗
16. Compressive Properties of FDM Rapid Prototypes Treated With a Low Cost Chemical Finishing
17. Quantitative Analysis of a Chemical Treatment to Reduce Roughness of Parts Fabricated Using Fused Deposition Modeling10.1016/j.cirp.2010.03.074 ↗
18. Structure and Mechanical Behavior of Big Area Additive Manufacturing (BAAM) Materials10.1108/RPJ-12-2015-0183 ↗
19. Mattox · 1998
20. Formulas for the Skin Effect10.1109/JRPROC.1942.232015 ↗
21. Spiral Antenna With Dual Dyson Balun Feed
22. Cohen · 190710.6028/bulletin.084 ↗