Show source-provided references
1. Low Friction Coefficient Nanocomposite CrAlSiN/Gradient-CrAlSiCN Coatings for High Speed/Dry Machining Applications
10.1115/1.4050175 ↗2. Orientation-Dependent Hardness in as-Deposited and Low-Temperature Annealed Ti/Ni Multilayer Thin Films
10.1115/1.4029058 ↗3. Evaluation of Sliding Wear Resistance of Physical Vapor Deposited Coatings by the Ball-Cratering Test Method
10.1115/1.4036067 ↗4. Preparation and Distribution Analysis of Thermal Barrier Coatings Deposited on Multiple Vanes by Plasma Spray-Physical Vapor Deposition Technology
10.1115/1.4036584 ↗5. Tribochemical Interactions of Friction Modifier and Antiwear Additives With CrN Coating Under Boundary Lubrication Conditions
10.1115/1.2961808 ↗6. Tribological Behaviors of Titanium Nitride- and Chromium-Nitride-Based Physical Vapor Deposition Coating Systems
10.1115/1.4007168 ↗7. Design and Simulation of Thermal Residual Stresses of Coatings on WC-Co Cemented Carbide Cutting Tool Substrate
10.1007/s12206-016-0430-0 ↗8. Effect of Annealing Temperature on Tribological Properties and Material Transfer Phenomena of CrN and CrAlN Coatings
10.1007/s11665-013-0748-z ↗10. Structure and Properties of CrSiN Nanocomposite Coatings Deposited by Hybrid Modulated Pulsed Power and Pulsed dc Magnetron Sputtering
10.1016/j.surfcoat.2012.11.053 ↗14. Tribological Evaluation of Soft Metallic Multilayer Coatings for Wear Applications Based on a Multiple Pass Scratch Test Method
10.1016/j.wear.2017.01.119 ↗15. Effect of Annealing Temperature on the Structural and Mechanical Properties of Coatings Prepared by Electrophoretic Deposition of TiO2 Nanoparticles
10.1016/j.tsf.2017.07.056 ↗16. Wear Behavior and Mechanical Properties of TiO2 Coating Deposited Electrophoretically on 316 L Stainless Steel
10.1115/1.4038102 ↗17. The Tribological and Corrosion Behavior of TiO2 Coatings Deposited by the Electrophoretic Deposition Process
10.1177/0954406219890373 ↗19. Microstructure and Properties of the Cr-Si-N Coatings Deposited by Combining High-Power Impulse Magnetron Sputtering (HiPIMS) and Pulsed DC Magnetron Sputtering
10.1007/s40195-017-0609-0 ↗21. An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments
10.1557/JMR.1992.1564 ↗28. Factors Governing the Mechanical Behaviour of CrSiN Coatings: Combined Nanoindentation Testing and Transmission Electron Microscopy
10.1016/j.msea.2011.11.072 ↗29. Nanomechanical Properties and Dry Sliding Wear Behavior of Conventional and Nanostructured WC-CoCr Coatings Prepared by HVOF Spraying
10.1016/j.ceramint.2016.09.180 ↗34. An Investigation of the Influence of Initial Roughness on the Friction and Wear Behavior of Ground Surfaces
10.3390/ma11020237 ↗35. The Effect of Counterpart Material on the Sliding Wear of TiAlN Coatings Deposited by Reactive Cathodic Pulverization
10.18226/23185279.v3iss2p59 ↗36. Unravelling the Abrasion Resistance of Two Novel Meta-Stable Titanium Alloys on the Basis of Multi-Pass-Dual-Indenter Tests
10.1016/j.wear.2019.203094 ↗