Amorphous and Semicrystalline Blends of Poly(vinylidene fluoride) and Poly(methyl methacrylate): Characterization and Modeling of the Mechanical Behavior
Source abstract
Abstract
After extensive studies starting in the 1970s in relation to miscibility and piezoelectric properties, the blends of poly(vinylidene fluoride) (PVDF) and poly(methyl methacrylate) (PMMA) have been revisited with the aim of assessing their mechanical behavior. Depending on the amount of PVDF, either amorphous or semicrystalline blends are produced. Typically, the blends remain amorphous when their PVDF content does not exceed 40 wt. %. Blend composition influence on the values of the glass transition temperature, Tg, and on its mechanical expression, Tα, is extensively discussed. Then, emphasis is put on the stress-strain behavior in tension and compression over the low deformation range covering the elastic, anelastic, and viscoplastic response. The reported data depend, as expected, on temperature and strain rate and also, markedly, on blend composition and degree of crystallinity. Molecular arguments, based on the contribution of the glass transition motions are proposed to account for the observed behavior. Thanks to the understanding of phenomena at the molecular level, accurate models can be selected in the view of mechanical modeling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Mechanical Behavior of Composites · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratoire de Sciences et Ingénierie de la Matière Molle (UMR 7615), Ecole Supérieure de Physique et Chimie Industrielles de la Ville de Paris (ESPCI ParisTech), 10 rue Vauquelin, 75231 Paris cedex 05, France
Institut Préparatoire aux Etudes Scientifiques et Techniques (IPEST), BP51, 2070 La Marsa, Tunisia
References (22)
Show source-provided references
1. Compatible High Polymers: Poly(vinylidene fluoride) Blends With Homopolymers of Methyl and Ethyl Methacrylate10.1021/ba-1971-0099-ch002 ↗
2. Melting Point Depression and Kinetic Effects of Cooling on Crystallisation in Poly(vinylidene fluoride)-Poly(methyl methacrylate) Mixtures10.1021/ma60048a039 ↗
3. Brillouin Scattering From Poly(vinylidene fluoride)-Poly(methyl methacrylate) Mixtures10.1021/ma60052a014 ↗
4. Spherulitic Crystallization in Compatible Blends of Poly(vinylidene fluoride) and Poly(methyl methacrylate)10.1021/ma60056a034 ↗
5. FTIR Evidence of Beta Crystal Phase Formation in Poly(vinylidene fluoride)/Poly(methyl methacrylate) Blends
6. DSC Studies of the Transitions in Poly(vinylidene fluoride) and Some Related Copolymers
7. Ferroelectric Properties of a Copolymer of Vinylidene Fluoride and Trifluoroethylene Blended With Poly(methyl methacrylate)10.1021/ma00163a021 ↗
8. Crystallization of Poly(vinylidene fluoride)-Poly(methyl methacrylate) Blends: Analysis of the Molecular Parameters Controlling the Nature of Poly(vinylidene fluoride) Crystalline Phase10.1021/ma00188a016 ↗
9. Structural and Kinetic Transitions in Poly(vinylidene fluoride-trifluoroethylene)/Poly(methyl methacrylate) Blends10.1016/S0032-3861(98)00686-7 ↗
10. Thermal and Mechanical Behaviour of Amorphous and Semicrystalline Poly(vinylidene fluoride)/Poly(methyl methacrylate Blends10.1002/masy.v198:1 ↗
11. Jarray, J. , 2005, Ph.D. thesis, “Crystallization Effects on the Thermomechanical Properties of Poly(vinylidene fluoride) -Poly(methyl methacrylate) Blends” (in French), Specialty Physics, University Tunis El Manar, Tunisia.
12. Halary
13. Experiments carried out by one of us (JJ) at the Ecole des Mines de Nancy (France) with the kind collaboration of JM Hiver, A Dahoun and C G’Sell.
14. Experimental Characterization of Deformation Damage in Solid Polymers Under Tension and Its Interrelation With Necking10.1016/S0020-7683(02)00184-1 ↗
15. Die Erniedrigung der Einfriertemperatur organischer Gläser durch Lösungsmittel10.1007/BF01519799 ↗
16. Effects of Molecular Interactions on the Viscoelastic and Plastic Behavior of Plasticized Poly(vinyl chloride)10.1002/pi.v52:7 ↗
17. The Determination of Diffuse-Boundary Thicknesses by Small-Angle X-Ray Scattering10.1107/S0021889880011478 ↗
18. Transitions in Semicrystalline Polymers. I. Poly(vinyl fluoride) and Poly(vinylidene fluoride)10.1080/00222347708208750 ↗
19. “Deformation, Yield and Fracture of Amorphous Polymers: Relation to the Secondary Transition,” “Intrinsic Mobility and Toughness of Polymers I,”10.1007/b136957 ↗
20. Theory for the Plasticity of Glassy Polymers10.1063/1.1726558 ↗
21. Studies currently in progress, in kind cooperation with R. Matadi, N. Bahlouli, S. Ahzi, and Y. Rémond at IMFS Strasbourg (France).
22. Theory of Non-Newtonian Flow. I. Solid Plastic System10.1063/1.1722098 ↗