Smooth Yield Surface Constitutive Modeling for Granular Materials
Source abstract
Abstract
In this paper, the authors present an internal state variable (ISV) cap plasticity model to provide a physical representation of inelastic mechanical behaviors of granular materials under pressure and shear conditions. The formulation is dependent on several factors: nonlinear elasticity, yield limit, stress invariants, plastic flow, and ISV hardening laws to represent various mechanical states. Constitutive equations are established based on a modified Drucker–Prager cap plasticity model to describe the mechanical densification process. To avoid potential numerical difficulties, a transition yield surface function is introduced to smooth the intersection between the failure and cap surfaces for different shapes and octahedral profiles of the shear failure yield surface. The ISV model for the test case of a linear-shaped shear failure surface with Mises octahedral profile is implemented into a finite element code. Numerical simulations using a steel metal powder are presented to demonstrate the capabilities of the ISV cap plasticity model to represent densification of a steel powder during compaction. The formulation is general enough to also apply to other powder metals and geomaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Geotechnical and Geomechanical Engineering · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Advanced Vehicular Systems, Box 5405, Mississippi State, MS 39762-5405 e-mail:
Mem. ASME Department of Mechanical Engineering, Mississippi State University, Box 9552, Mississippi State, MS 39762-9552 e-mail:
Mem. ASME Department of Mechanical Engineering, University of Alabama, Box 870276, Tuscaloosa, AL 35487-0276 e-mail:
References (51)
Show source-provided references
1. An Elastoplastic Framework for Granular Materials Becoming Cohesive Through Mechanical Densification—Part I: Small Strain Formulation10.1016/j.euromechsol.2005.10.001 ↗
2. A Three-Invariant Smooth Cap Model With Mixed Hardening10.1002/nag.1610181002 ↗
3. The Sandia Geomodel: Theory and User's Guide
4. Implicit Numerical Integration of a Three-Invariant, Isotropic/Kinematic Hardening Cap Plasticity Model for Geomaterials10.1016/j.cma.2005.01.001 ↗
5. Simplified Model for Inelastic Behavior of an Idealized Granular Material10.1016/j.ijplas.2007.06.001 ↗
6. A Plasticity Model for Powder Compaction Processes Incorporating Particle Deformation and Rearrangement10.1016/j.ijsolstr.2007.11.021 ↗
7. Non-Uniqueness of Critical State Line in Compression and Extension Conditions10.1002/nag.770 ↗
8. Including Friction in the Mathematics of Classical Plasticity10.1002/nag.806 ↗
9. A Micromechanics-Based Elastoplastic Damage Model for Granular Materials at Low Confining Pressure10.1016/j.ijplas.2009.09.006 ↗
10. Nonlinear Elasto-Plastic Model for Dense Granular Flow10.1016/j.ijplas.2009.06.007 ↗
11. An Improved Implicit Numerical Integration of a Non-Associated, Three-Invariant Cap Plasticity Model With Mixed Isotropic-Kinematic Hardening for Geomaterials10.1002/nag.2372 ↗
12. Review of the Development of Cap Models for Geomaterials10.1155/2005/104968 ↗
13. A Three-Invariant Cap Model with Isotropic-Kinematic Hardening Rule and Associated Plasticity for Granular Materials10.1016/j.ijsolstr.2007.08.019 ↗
14. A Thermomechanical Constitutive Model for Cemented Granular Materials With Quantifiable Internal Variables—Part II: Validation and Localization Analysis10.1016/j.jmps.2014.05.022 ↗
15. A Thermomechanical Constitutive Model for Cemented Granular Materials With Quantifiable Internal Variables—Part I: Theory10.1016/j.jmps.2014.05.021 ↗
16. A Cap Model for Partially Saturated Soils10.1002/nag.658 ↗
17. A Modified Drucker–Prager Cap Model for Die Compaction Simulation of Pharmaceutical Powders10.1016/j.ijsolstr.2008.01.024 ↗
18. Finite Element Analysis of Pharmaceutical Tablet Compaction Using a Density Dependent Material Plasticity Model10.1016/j.powtec.2010.04.001 ↗
19. Finite Element Method (FEM) Modeling of the Powder Compaction of Cosmetic Products: Comparison Between Simulated and Experimental Results10.1016/j.powtec.2012.02.058 ↗
20. A Finite Strain Constitutive Model for Metal Powder Compaction Using a Unique and Convex Single Surface Yield Function10.1016/j.euromechsol.2006.01.002 ↗
21. P-FEM for Finite Deformation Powder Compaction10.1016/j.cma.2007.09.001 ↗
22. Soil Mechanics and Plastic Analysis or Limit Design
23. Limit Analysis of Two and Three Dimensional Soil Mechanics Problems10.1016/0022-5096(53)90001-5 ↗
24. 1968
25. Soil Mechanics and Work-Hardening Theories of Plasticity
26. Continuum Theory of Ductile Rupture by Void Nucleation and Growth—Part I: Yield Criteria and Bow Rules for Porous Ductile Media10.1115/1.3443401 ↗
27. Plasticity Theory for Porous Metals10.1016/0020-7403(76)90030-8 ↗
28. Yielding of Metal Powder Bonded by Isolated Contacts10.1016/0022-5096(92)90064-9 ↗
29. On the Cold Compaction of Powders10.1016/0022-5096(95)00039-L ↗
30. Numerical Simulation of Metal Powder Die Compaction With Special Consideration of Cracking10.1179/003258900665871 ↗
31. Modeling of Powder Compaction Using the Finite Element Method
32. A Smooth, Three-Surface Elasto-Plastic Cap Model: Rate Formulation, Integration Algorithm and Tangent Operators
33. A General Basis for Yield, Failure, and Potential Functions in Plasticity10.1002/nag.1610040406 ↗
34. Single Hardening Constitutive Model for Frictional Materials—Part I: Yield Criterion and Plastic Work Contours10.1016/0266-352X(88)90053-5 ↗
35. On a Viscoplastic Model for Rocks With Mechanism-Dependent Characteristic Times10.1007/s11440-006-0010-z ↗
36. Material Models for Granular
37. Experimental Determination of Yield Functions for Compaction of Blended Metal Powders
38. Versuche über den Einfuss der mittleren Hauptspannung auf das Fliessen der Metalle Eisen Kupfer und Nickel. Z
39. A Modified Formulation of the Cap Model
40. An Algorithm and a Modular Subroutine for the Cap Model10.1002/nag.1610030206 ↗
41. Triaxial Characterisation of Iron Powder Behavior10.1179/003258999665693 ↗
42. Strain and Ultimate Strength of Concrete Under Triaxial Stress
43. A New Yield Function for Geomaterials
44. ABAQUS: Theory Manual 6.8
45. Determination of the Constants of Cap Model for Compaction of Three Metal Powders10.1016/j.apt.2015.03.008 ↗
46. Method for Determination of Density of Compacted or Sintered Powder Metallurgy Products
47. Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
48. Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
49. 1991 · 398
50. Sinka, I. C., Cunningham, J. C., and Zavaliangos, A., 2001, “Experimental Characterization and Numerical Simulation of Die Wall Friction in Pharmaceutical Powder Compaction,” PM2TEC 2001 International Conference on Powder Metallurgy & Particulate Materials, New Orleans, LA, Vol. 1, pp. 46–60.
51. The Effects of Lubricant Content and Relative Powder Density on the Elastic, Yield and Failure Behavior of a Compacted Metal Powder