Strain-Hardening Model of Dual-Phase Steel With Geometrically Necessary Dislocations
Source abstract
Abstract
The strain-hardening behavior of metal during the uniaxial tension can be treated as the competing result of generation and annihilation of statistically stored dislocations (SSDs). Geometrically necessary dislocations (GNDs) are generated to accommodate a lattice mismatch and maintain deformation compatibility in dual-phase (DP) steels because of the heterogeneous deformation of the microstructure. In this study, a dislocation-based strain-hardening model that encompasses GNDs was developed to describe the mechanical properties of dual-phase steel. The GNDs were obtained based on a cell model of uniaxial deformation and the SSDs were calculated using a dynamic recovery model. The strain of each phase is a nonlinear function of the overall material strain obtained by the point-interpolation method (PIM). The proposed strain-hardening model was verified by using commercially produced DP600 steel. The calculated results obtained with GNDs are able to predict more precisely the experimental data than that without. The effects of martensite volume fraction and grain size on the strain-hardening behaviors of individual phases and material were studied.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mem. ASME Department of Engineering Mechanics and Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai 200240, China e-mail:
Associate Professor Mem. ASME Department of Engineering Mechanics and Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai 200240, China e-mail:
Funding
National Natural Science Foundation of China
References (48)
Show source-provided references
1. Advanced High Strength Steels for Automotive Industry10.1016/S1644-9665(12)60197-6 ↗
2. Stretch-Flangeability Characterisation of Multiphase Steel Using a Microstructure Based Failure Modelling10.1016/j.commatsci.2008.06.024 ↗
3. An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design10.1146/annurev-matsci-070214-021103 ↗
4. A Study of Local Deformation and Damage of Dual Phase Steel10.1016/j.matdes.2014.08.009 ↗
5. Digital Image Correlation Studies for Microscopic Strain Distribution and Damage in Dual Phase Steels10.1016/j.scriptamat.2007.01.031 ↗
6. Local Plastic Strain Evolution in a High Strength Dual-Phase Steel10.1016/j.msea.2010.04.052 ↗
7. Micromechanics Stress-Strain Behavior Prediction of Dual Phase Steel Considering Plasticity and Grain Boundaries Debonding10.1016/j.matdes.2014.12.013 ↗
8. Characterization and Modelling of Failure Initiation in DP Steel10.1016/j.commatsci.2013.04.001 ↗
9. Micromechanics Based Modeling of Dual Phase Steels: Prediction of Ductility and Failure Modes10.1016/j.commatsci.2011.12.031 ↗
10. Microstructure Based Prediction of Strain Hardening Behavior of Dual Phase Steels10.1016/j.matdes.2012.05.010 ↗
11. An Experimental Investigation of Large-Strain Tensile Behavior of a Metal Sheet10.1016/j.matdes.2006.07.005 ↗
12. Strain-Hardening Behaviors of Dual Phase Steels With Microstructure Features10.1016/j.msea.2016.06.066 ↗
13. Zur Kristallplastizität I: Tieftemperaturplastizität Und Beckersche Formel
14. The Mechanism of Plastic Deformation of Crystals—Part I: Theoretical10.1098/rspa.1934.0106 ↗
15. Dislocation Substructure as a Function of Strain in a Dual-Phase Steel10.1007/BF02644716 ↗
16. Strain Gradient Plasticity: Theory and Experiment10.1016/0956-7151(94)90502-9 ↗
17. Strain Gradient Plasticity10.1016/S0065-2156(08)70388-0 ↗
18. A Dislocation-Based Model for Deformation and Size Effect in Multi-Phase Steels10.1016/j.ijplas.2015.05.005 ↗
19. Some Geometrical Relations in Dislocated Crystals Quelques Relations Géométriques Dams Des Cristaux Disloqués Einige Gemetrische Beziehungen in Verformten Kristallen
20. Transformation-Induced, Geometrically Necessary, Dislocation-Based Flow Curve Modeling of Dual-Phase Steels: Effect of Grain Size10.1007/s11661-012-1196-3 ↗
21. Physics and Phenomenology of Strain Hardening: The FCC Case
22. A Dislocation-Based Theory for the Deformation Hardening Behavior of DP Steels: Impact of Martensite Content and Ferrite Grain Size10.1155/2010/647198 ↗
23. The Deformation of Plastically Non-Homogeneous Materials10.1080/14786437008238426 ↗
24. Geometrically Necessary Dislocations, Hardening, and a Simple Gradient Theory of Crystal Plasticity10.1016/S1359-6462(02)00337-8 ↗
25. Steady-Crack Growth and Work of Fracture for Solids Characterized by Strain Gradient Plasticity10.1016/S0022-5096(97)00018-5 ↗
26. Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity10.1016/S0022-5096(97)00086-0 ↗
27. Geometrically Necessary Dislocation and Size-Dependent Plasticity10.1016/S1359-6462(02)00329-9 ↗
28. Strain Gradient Effects on Deformation Strengthening Behavior of Particle Reinforced Metal Matrix Composites10.1016/S0921-5093(02)00459-8 ↗
29. An Enhanced Continuum Model for Size-Dependent Strengthening and Failure of Particle-Reinforced Composites10.1016/j.actamat.2009.08.010 ↗
30. Effect of Strain Gradients and Heterogeneity on Flow Strength of Particle Reinforced Metal-Matrix Composites10.1115/1.1417487 ↗
31. Material-Length-Scale-Controlled Nanoindentation Size Effects Due to Strain-Gradient Plasticity10.1016/S1359-6454(03)00281-7 ↗
32. A Multi-Phase Model for High Strength Steels10.1142/S1758825115500805 ↗
33. Study on the Mixture Strain Hardening of Multi-Phase Steels10.1016/j.msea.2012.04.028 ↗
34. A Physically Based Model for TRIP-Aided Carbon Steels Behaviour10.1016/S0921-5093(03)00121-7 ↗
35. Grain Size Dependence of the Strength of Metals: The Hall–Petch Effect Does Not Scale as the Inverse Square Root of Grain Size10.1016/j.ijplas.2013.07.004 ↗
36. Microstructure-Based RVE Approach for Stretch-Bending of Dual-Phase Steels10.1007/s11665-016-1880-3 ↗
37. Quantification of the Effect of Transformation-Induced Geometrically Necessary Dislocations on the Flow-Curve Modelling of Dual-Phase Steels10.1016/j.ijplas.2012.11.003 ↗
38. Effect of Grain and Twin Boundaries on the Hardening Mechanisms of Twinning-Induced Plasticity Steels10.1016/j.scriptamat.2007.10.050 ↗
39. Characterizing DP-Steels Using Micromechanical Modeling of Cells10.1016/j.commatsci.2006.07.003 ↗
40. Predicting the Effect of Ultrafine Ferrite on the Deformation Behavior of DP-Steels10.1016/j.commatsci.2016.03.048 ↗
41. Investigation of the Indentation Size Effect Through the Measurement of the Geometrically Necessary Dislocations Beneath Small Indents of Different Depths Using EBSD Tomography10.1016/j.actamat.2008.09.039 ↗
42. Influence of Plastic Deformation Heterogeneity on Development of Geometrically Necessary Dislocation Density in Dual Phase Steel10.1016/j.msea.2016.05.022 ↗
43. Orientation Gradients and Geometrically Necessary Dislocations in Ultrafine Grained Dual-Phase Steels Studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
44. Microstructures and Mechanical Properties of Dual Phase Steel Produced by Laboratory Simulated Strip Casting10.1016/j.matdes.2015.09.031 ↗
45. Effect of Martensite Volume Fraction on Work Hardening Behavior of Triple Phase (TP) Steels10.1016/j.msea.2011.02.021 ↗
46. Prediction of the Work-Hardening Exponent for Ultrafine-Grained Steels10.1016/j.msea.2011.11.064 ↗
47. Micromechanical Finite Element Analysis of the Effects of Martensite Particle Size and Ferrite Grain Boundaries on the Overall Mechanical Behavior of Dual Phase Steel10.1115/1.4036687 ↗
48. Effect of Grain Refinement to 1 μm on Strength and Toughness of Dual-Phase Steels10.1016/j.msea.2010.08.062 ↗