journal article·2023-01-01

Shear Fracture Criterion of Advanced High-Strength Steel Based on Stress Triaxiality and Equivalent Strain

Q. T. Fu, D. Li, H. Song, X. F. Liu, J. C. Xu, N. Jiang

Publisher page

Abstract

Abstract Advanced high-strength steel (AHSS) is increasingly used in the automotive industry due to its higher strength and lower weight. The traditional forming limit criterion cannot accurately predict the unique shear fracture of AHSS, so great efforts have been made to develop failure criteria that can predict shear fracture. In this paper, a series of tensile and shear tests for four steel sheets of AHSS are designed, the stress triaxiality and equivalent strain to fracture are solved, and the correlation between them and the performance parameters of steel sheets K and n is studied. In order to study the relationship between stress triaxiality and equivalent strain to fracture in the range of low-stress triaxiality, the Hill'48 orthotropic model and modified Mohr–Coulomb (MMC) fracture model were used to establish tensile and shear fracture models of four dual-phase sheets of steel, simulating and studying the plastic fracture of AHSS. Solving the relevant parameters enriches the stress triaxiality of the four steel types, establishes the relationship between the stress triaxiality and the equivalent strain to fracture, and verifies its correctness through tensile and bending tests and simulations. The results show MMC can accurately predict the fracture of these four dual-phase steels, and the quantitative relationship between stress triaxiality and equivalent strain to fracture of the four dual-phase steels in the low-stress triaxiality range 0–0.3 is similar, which can be established and expressed by the performance parameters of each steel type.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Structural Load-Bearing Analysis · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shandong University of Technology School of Transportation and Vehicle Engineering, , Zibo 255000 , China

School of Transportation and Vehicle Engineering, Shandong University of Technology , Zibo 255000 , China

References (20)

Show source-provided references
1. The Inelastic Behavior of Engineering Materials and Structures10.1016/0016-0032(50)90340-1 ↗
2. Ductility and the Workability of Metals
3. Ductile Fracture in Axisymmetric Extrusion and Drawing—Part 1: Deformation Mechanics of Extrusion and Drawing10.1115/1.3439470 ↗
4. On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space10.1016/j.ijmecsci.2004.02.006 ↗
5. On the Cut-Off Value of Negative Triaxiality for Fracture10.1016/j.engfracmech.2004.07.011 ↗
6. Application of Extended Mohr–Coulomb Criterion to Ductile Fracture10.1007/s10704-009-9422-8 ↗
7. A New Model of Metal Plasticity and Fracture With Pressure and Lode Dependence10.1016/j.ijplas.2007.09.004 ↗
8. Prediction and Analysis of Ductile Fracture in Sheet Metal Forming—Part I: A Modified Ayada Criterion10.1177/1056789514541559 ↗
9. Modeling of Shear Ductile Fracture Considering a Changeable Cut-Off Value for Stress Triaxiality10.1016/j.ijplas.2013.08.006 ↗
10. New Ductile Fracture Criterion for Prediction of Fracture Forming Limit Diagrams of Sheet Metals10.1016/j.ijsolstr.2012.02.016 ↗
11. Numerical Failure Analysis of a Stretch-Bending Test on Dual-Phase Steel Sheets Using a Phenomenological Fracture Model10.1016/j.ijsolstr.2010.07.010 ↗
12. A Modified Coffin-Manson Model for Ultra-low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality—ScienceDirect10.1016/j.engfracmech.2020.107223 ↗
13. A Constitutive Model Coupling Damage and Material Anisotropy for Wide Stress Triaxiality10.1016/j.cja.2020.09.018 ↗
14. A New Ductile Fracture Criterion Considering Both Shear and Tension Mechanisms on Void Coalescence10.1177/1056789520962831 ↗
15. A Theory of the Yielding and Plastic Flow of Anisotropic Metals10.1098/rspa.1948.0045 ↗
16. Elastic–Plastic Behavior of Steel Sheets Under in-Plane Cyclic Tension–Compression at Large Strain10.1016/S0749-6419(01)00049-3 ↗
17. Internal Variable Modeling of the High Strain-Rate Behavior of Metals with Applications to Multiphase Steels10.1016/j.msea.2007.06.011 ↗
18. Plane Stress Yield Function for Aluminum Alloy Sheets—Part 1: Theory10.1016/S0749-6419(02)00019-0 ↗
19. Spring-Back Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-quadratic Anisotropic Yield Functions, Part III: Applications10.1016/j.ijplas.2004.05.014 ↗
20. On the Effect of the Third Invariant of the Stress Deviator on Ductile Fracture