Characterization of Mechanical Heterogeneity and Study of the Mechanical Field at the Tip of the Stationary-Growing Crack in Dissimilar Metal Welded Joints
Source abstract
Abstract
Abstract The mechanical heterogeneity in local areas of dissimilar metal welded joints and the micro-area mechanical state at the crack tip are key factors in determining Environment-Assisted Cracking (EAC). Traditional methods for acquiring material mechanical properties often result in destructive damage to specimens, while conventional “sandwich” models exhibit abrupt changes in interfacial mechanical properties and a lack of research into the mechanical field at the tip of the stationary or growing crack. In light of these challenges, this study, based on the analysis of microstructures in localized regions of the welded joint and the acquisition of material mechanical properties through indentation tests, developed a user-defined material subroutine (UMAT) to characterize the mechanical properties of non-uniform local areas within the welded joint. Additionally, it investigated the mechanical field at the tip of the stationary—growing crack using an integral method and a de-bond technique. The results indicate that non-destructive indentation tests can accurately acquire the material mechanical properties of local areas in the welded joint. Notably, significant changes in mechanical properties typically occur in the material interface regions, making them vulnerable points for potential failure. Furthermore, under the same load, mechanical heterogeneity significantly influences the distribution of the mechanical field at the crack tip. Crack propagation induces alterations in crack tip stresses, resulting in noticeable residual stresses and strains along the propagation path.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an University of Science and Technology School of Mechanical Engineering, , Xi’an 710054 , China
Xi'an University of Science and Technology School of Mechanical Engineering, , Xi’an 710054 , China
Funding
National Natural Science Foundation of China
References (23)
Show source-provided references
1. Fracture Mechanism of a Dissimilar Metal Welded Joint in Nuclear Power Plant10.1016/j.engfailanal.2012.10.005 ↗
2. Effect of Welded Mechanical Heterogeneity on Local Stress and Strain Ahead of Stationary and Growing Crack Tips10.1016/j.nucengdes.2008.12.024 ↗
3. A Brief History of Environmental Cracking in Hot Water10.5006/2881 ↗
4. Current Research on Environmentally Assisted Cracking in Light Water Reactor Environments10.1016/S0029-5493(99)00206-X ↗
5. A Multi-Method Coupled Approach to Simulate Crack Growth Path and Stress-Strain Field at the Tip of the Growing Crack in the Dissimilar Metal Welded Joint10.1016/j.ijpvp.2023.105046 ↗
6. Microstructure, Local Mechanical Properties and Stress Corrosion Cracking Susceptibility of an SA508-52M-316LN Safe-end Dissimilar Metal Weld Joint by GTAW10.1016/j.msea.2016.05.101 ↗
7. Residual Strain Measurement and Grain Boundary Characterization in the Heat-Affected Zone of a Weld Joint Between Alloy 690TT and Alloy 5210.1016/j.jnucmat.2009.12.016 ↗
8. The Effect of Strength Mismatch and Residual Stress in ECA of Girth Welds With Internal Circumferential Cracks10.1115/PVP2009-77683 ↗
9. An Approach for Obtaining Mechanical Property of Austenitic Stainless Steel by Using Continuous Indentation Test Analysis10.1016/j.istruc.2020.11.001 ↗
10. A Novel Inverse Methodology for the Extraction of Bulk Elasto-Plastic Tensile Properties of Metals Using Spherical Instrumented Indentation10.1016/j.ijsolstr.2021.111317 ↗
11. The Determination of Yield Strength From Hardness Measurements10.1007/BF02913433 ↗
12. Mechanical Properties Characterisation of Welded Joint of Austenitic Stainless Steel Using Instrumented Indentation Technique10.1080/09603409.2016.1187463 ↗
13. Developing a Method in Measuring Residual Stress on Steel Alloys by Instrumented Indentation Technique10.1016/j.measurement.2020.107718 ↗
14. Anisotropy and Heterogeneity of Microstructure and Mechanical Properties in Metal Additive Manufacturing: A Critical Review10.1016/j.matdes.2017.11.021 ↗
15. Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints10.3390/ma14154145 ↗
16. Numerical Analysis of Constraint and Strength Mismatch Effects on Local Fracture Resistance of Bimetallic Joints10.4028/www.scientific.net/AMM.750.24 ↗
17. Determination of the Stress Field and Crack Initiation Angle of an Open Flaw tip Under Uniaxial Compression10.1016/j.tafmec.2019.102358 ↗
18. An Approach for Obtaining Surface Residual Stress Based on Indentation Test and Strain Measurement10.1515/mt-2021-2037 ↗
19. Revelation of a Functional Dependence of the Sum of Two Uniaxial Strengths/Hardness on Elastic Work/Total Work of Indentation10.1557/jmr.2006.0111 ↗
20. Approach for Obtaining Material Mechanical Properties in Local Region of Structure Based on Accurate Analysis of Micro-Indentation Test10.1186/s10033-021-00644-6 ↗
21. A Three-Dimensional Elastoplastic Constitutive Model for Concrete10.1016/j.compstruc.2015.10.003 ↗
22. Effect of Inhomogeneous Mechanical Properties on the Stress–Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints10.1155/2023/6408667 ↗
23. General Corrosion and Stress Corrosion Cracking of Alloy 600 in Light Water Reactor Primary Coolants10.1016/j.jnucmat.2019.04.023 ↗