Fatigue Crack Growth of Duplex Stainless Steel Castings at 4 K
Source abstract
Abstract
Constant-load-amplitude stage II fatigue crack growth rates at 4 K were measured for duplex stainless steel castings. The results show that at a ΔK of 60 MPa•m1/2, da/dN = 7.6 × 10−4 mm/cycle for an alloy with 1 percent ferrite. For an alloy with 8 percent ferrite, da/dN is 35 percent, and for an alloy with 29 percent ferrite, da/dN is 260 percent greater than for the 1 percent ferrite alloy. However, the exponent in the Paris equation does not change appreciably (less than 18 percent) as the ferrite content changes from 1 to 29 percent.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Fracture and Deformation Division, National Bureau of Standards, Boulder Colo. 80303
References
Reference metadata was not supplied for this record.