Strain Rate and Temperature Effects in Nanoindentation Testing on Hardness in Selective Laser Melting IN718
Source abstract
Abstract
Abstract The microstructure and mechanical hardness of Inconel 718 (INC718) hexagonal honeycomb cellular structure manufactured by selective laser melting (SLM) was studied in this work. Non-heat-treated SLM-produced samples with cell wall thicknesses of 0.4, 0.6, and 0.8 mm were studied. The hardness was measured using MTS Nanoindenter at different temperatures and strain rates. At room temperature, continuous hardness measurements through a penetration depth of 2 µm using three different strain rates (0.02, 0.05, and 0.08 s−1) were performed. At the temperatures 100 and 200 °C, single hardness measurements at eight different maximum loads were performed. Using scanning ion microscopy (SIM), the grain size was found to change significantly as the cell wall thickness reduced from 0.6 mm to 0.4 mm compared to the change from 0.8 mm to 0.6 mm. A similar trend in mechanical hardness reduction was observed in the three samples. The microstructure, hardness, and strain rate sensitivity displayed anisotropy in properties between the planes parallel and perpendicular to the build direction. A model describing the temperature, strain rate, and indentation size effects on hardness developed by the second author was modified and used to evaluate the intrinsic material length scale used in gradient plasticity theory.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Computational Solid Mechanics Laboratory; Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, LA 70803
Institute of Innovation in Sustainable, Engineering (IISE);, College of Science and Engineering, University of Derby, Derby, DE22 1GB, UK
References (58)
Show source-provided references
1. Gibson · 199710.1017/CBO9781139878326 ↗
2. Four Questions in Cellular Material Design10.3390/ma12071060 ↗
3. Multifunctional Periodic Cellular Metals10.1098/rsta.2005.1697 ↗
4. A Review of Powder Additive Manufacturing Processes for Metallic Biomaterials10.1016/j.powtec.2017.12.058 ↗
5. Powder-Bed Additive Manufacturing for Aerospace Application: Techniques, Metallic and Metal/Ceramic Composite Materials and Trends10.1051/mfreview/2019003 ↗
6. Additively-Manufactured Functionally Graded Ti-6Al-4V Lattice Structures With High Strength Under Static and Dynamic Loading: Experiments10.1016/j.ijimpeng.2017.09.018 ↗
7. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges10.1016/j.compositesb.2018.02.012 ↗
8. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing10.1007/978-1-4419-1120-9 ↗
9. Standard Terminology for Additive Manufacturing—General Principles—Terminology
10. Mechanical Response of Cellular Solids: Role of Cellular Topology and Microstructural Irregularity10.1016/j.ijengsci.2008.03.012 ↗
11. Modelling, and Characterization of 3D Printed Cellular Structures10.1016/j.matdes.2018.01.028 ↗
12. The Effect of Geometry on Mechanical Properties of Ti6Al4 V ELI Scaffolds Manufactured Using Additive Manufacturing Technology10.1007/s43452-020-0011-y ↗
13. Effects of Unit Cell Size on the Mechanical Performance of Additive Manufactured Lattice Structures
14. Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts With Body-Centred-Cubic Lattices of Varying Cell Size10.1007/s11340-015-0021-5 ↗
15. Mechanical Properties of Additively Manufactured Thick Honeycombs10.3390/ma9080613 ↗
16. Investigation on Deformation Process of Cellular Structures With Gradient Topology Manufactured Additively10.1063/1.5092111 ↗
17. Laser Additive Manufacturing of Metallic Components: Materials, Processes and Mechanisms10.1179/1743280411Y.0000000014 ↗
18. Role of Heat Treatment and Build Orientation in the Microstructure Sensitive Deformation Characteristics of IN718 Produced via SLM Additive Manufacturing10.1016/j.addma.2018.04.032 ↗
19. Densification and Microstructural Investigation of Inconel 718 Parts Fabricated by Selective Laser Melting10.1016/j.powtec.2017.01.030 ↗
20. Microstructure and Mechanical Properties of Inconel 718 Produced by Selective Laser Melting: Sample Orientation Dependence and Effects of Post Heat Treatments10.1016/j.msea.2017.12.043 ↗
21. Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)10.1002/adem.201500158 ↗
22. Nanomechanical Properties of Additively and Traditionally Manufactured Nickel-Chromium-Based Superalloys Through Instrumented Nanoindentation10.1016/j.mfglet.2019.09.003 ↗
23. The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting10.1016/j.jallcom.2011.10.107 ↗
24. Comparison of Microstructures and Mechanical Properties of Inconel 718 Alloy Processed by Selective Laser Melting and Casting10.1016/j.msea.2018.03.073 ↗
25. Nanoindentation Based Properties of Inconel 718 at Elevated Temperatures: A Comparison of Conventional Versus Additively Manufactured Samples10.1016/j.ijplas.2019.04.018 ↗
26. Analytical and Experimental Determination of Rate and Temperature-Dependent Length Scales Using Nanoindentation Experiments10.1061/(ASCE)NM.2153-5477.0000027 ↗
27. Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service 1
28. The Application of Focused ion Beam Microscopy in the Material Sciences10.1016/j.matchar.2008.11.014 ↗
29. Grain Contrast Imaging in FIB and SEM10.1088/1742-6596/126/1/012054 ↗
30. MTS Systems Corporation · 2002
31. Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology10.1557/jmr.2004.19.1.3 ↗
32. An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments10.1557/JMR.1992.1564 ↗
33. Indentation Power-Law Creep of High-Purity Indium10.1007/s11661-999-0051-7 ↗
34. Effect of Element Wall Thickness on the Homogeneity and Isotropy of Hardness in SLM IN718 Using Nanoindentation10.1016/j.mechrescom.2020.103568 ↗
35. Role of Grain Boundary on the Sources of Size Effects10.1016/j.commatsci.2016.01.025 ↗
36. The Mechanical Behavior During Nanoindentation Near the Grain Boundary in a Bicrystal FCC Metal10.1016/j.msea.2014.10.070 ↗
37. Dependence of Nanohardness upon Indentation Size and Grain Size—A Local Examination of the Interaction Between Dislocations and Grain Boundaries10.1016/j.actamat.2006.09.004 ↗
38. A Phenomenological Theory for Strain Gradient Effects in Plasticity10.1016/0022-5096(93)90072-N ↗
39. Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity10.1016/S0022-5096(97)00086-0 ↗
40. Strain Gradient Plasticity10.1016/S0065-2156(08)70388-0 ↗
41. Hollomon · 1945
42. The Mechanism of Plastic Deformation of Crystals. Part I.—Theoretical
43. Mechanism-Based Strain Gradient Plasticity—I. Theory10.1016/S0022-5096(98)00103-3 ↗
44. Mechanism-Based Strain Gradient Plasticity—II. Analysis10.1016/S0022-5096(99)00022-8 ↗
45. A Comparative Discrete-Dislocation/Nonlocal Crystal-Plasticity Analysis of Plane-Strain Mode I Fracture10.1016/S0921-5093(01)01397-1 ↗
46. Modeling Plasticity at the Micrometer Scale10.1007/s001140050665 ↗
47. Crystallographic Aspects of Geometrically-Necessary and Statistically-Stored Dislocation Density10.1016/S1359-6454(99)00020-8 ↗
48. Dislocation Evolution During Plastic Deformation: Equations vs. Discrete Dislocation Dynamics Study10.1063/1.5013213 ↗
49. Geometrically Necessary Dislocation Density Evolution in Interstitial Free Steel at Small Plastic Strains10.1007/s11661-018-4693-1 ↗
50. Size Effects in Nanoindentation: An Experimental and Analytical Study10.1007/s00707-009-0222-z ↗
51. The Hardness of Metals, D. Tabor 1951, Oxford, p. 175, 15s10.1299/jsmemag.56.414_592_5 ↗
52. The Influence of Indenter Tip Radius on the Micro-indentation Hardness10.1115/1.1480409 ↗
53. Gradient Plasticity Theory With a Variable Length Scale Parameter10.1016/j.ijsolstr.2004.12.010 ↗
54. Flow Behavior and Microstructures of Superalloy 718 During High Temperature Deformation10.1016/j.msea.2008.07.046 ↗
55. A Micro-indentation Study of Superplasticity in Pb, Sn, and Sn-38 wt% Pb10.1016/0001-6160(88)90319-7 ↗
56. The Deformation and Ageing of Mild Steel: III Discussion of Results10.1088/0370-1301/64/9/303 ↗
57. The Cleavage Strength of Polycrystals
58. The Effect of Friction on Indenter Force and Pile-Up in Numerical Simulations of Bone Nanoindentation10.1016/j.jmbbm.2011.03.026 ↗