journal article·2024-07-01Open access

Effects of Fiber Treatment and Humidity on the Mechanical, Fracture Toughness, Dynamic and Thermal Properties of Grewia Optiva Natural Fiber-Reinforced Epoxy Composites

Sonika Chauhan, Prakash Chandra Gope

Abstract

Abstract The effects of relative humidity and fiber treatment on the mechanical properties of Grewia optiva natural fibers reinforced composites were studied. The results revealed that the fiber reinforcement composition with benzoyl peroxide (BP) treatment on NaOH-pretreated fiber shows optimum results at 90% relative humidity. The corresponding experimental results of the tensile strength (MPa), percentage elongation, flexural strength (MPa), impact strength (kJ/m2), and fracture toughness (MPa √m) were 260.895, 5.230, 52.572, 33.226, and 2.565, respectively. The surface response method yielded the optimum properties with a D value of 0.768 and properties variation between 1% and 6%. Thermogravimetry analysis shows a considerable amount of variation in the rate of degradation after the chemical treatment of fibers. A decrease in the damping factor and an increase in glass transition temperature due to chemical treatment show increased fiber-matrix interfacial bonding and cross-linking. Scanning electron microscopy images show that BP treatment is more suitable than NaOH treatment to remove the undesirable elements from the fiber surface and higher surface roughness to obtain better bonding between fiber and matrix. The fiber diameter reduction due to BP and NaOH treatment is about 57% and 52.62% as compared to untreated fiber.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Soil Mechanics and Vehicle Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

G. B. Pant University of Agriculture and Technology Department of Mechanical Engineering, College of Technology, , Pantnagar, Uttarakhand 263145 , India

References (80)

Show source-provided references
1. Green Composites Based on Animal Fiber and Their Applications for a Sustainable Future10.3390/polym15030601 ↗
2. Recent Advances in the Application of Natural Fiber Based Composites10.1002/mame.201000095 ↗
3. Ramesh · 2021 · 2110.1007/978-981-15-9643-8_2 ↗
4. Industrial Applications of Natural Fiber-Reinforced Polymer Composites–Challenges and Opportunities10.1080/19397038.2018.1538267 ↗
5. A Comparative Study on Functionalization of Cellulosic Biofiber by Graft Copolymerization of Acrylic Acid in Air and Under Microwave Radiation10.15376/biores.7.2.2019-2037 ↗
6. Micro Cellulose Grewia Optiva Fiber-Reinforced Polymer Composites: Relationship Between Structural and Mechanical Properties10.1080/15440478.2020.1800549 ↗
7. Enhancing Compressive Strength of Soil Using Natural Fibers10.1016/j.conbuildmat.2015.05.065 ↗
8. Synthesis and Kinetics of Ascorbic Acid Initiated Graft Copolymerized Delignified Cellulosic Fiber10.1002/pen.23918 ↗
9. Mechanical Properties of Banana Fibers (Musa Sepientum)10.1007/BF00541832 ↗
10. Acoustic and Mechanical Characterisation of Polypropylene Composites Reinforced by Natural Fibers for Automotive Applications10.1016/j.jmrt.2020.09.112 ↗
11. Synthesis and Characterization of Grewia Optiva Fiber-Reinforced PF-Based Composites10.1080/00914030802257800 ↗
12. Comparative Studies of Mechanical and Morphological Properties of Polylactic Acid and Polypropylene Based Natural Fiber Composites10.1177/0731684412447992 ↗
13. Fabrication and Characterization of Biocomposite Using Grewia Optiva Fiber (i.e. Bhimal) Reinforced Polyvinyl Alcohol (PVA)10.4028/www.scientific.net/AMR.1105.51 ↗
14. Cornstarch/Poly (Vinyl Alcohol) Biocomposite Blend Films: Mechanical Properties, Thermal Behavior, Fire Retardancy, and Antibacterial Activity10.1080/1023666X.2015.1018491 ↗
15. Physico-Mechanical and Tribological Properties of Grewia Optiva Fiber/Bio-Particulates Hybrid Polymer Composites10.1063/1.4946435 ↗
16. Effect of Water Absorption on the Mechanical Properties of Grewia Optiva Fiber Reinforced Biocomposites10.22271/27078043 ↗
17. Himalayan Natural Fiber-Reinforced Epoxy Composites: Effect of Grewia Optiva/Bauhinia Vahlii Fibers on Physico-Mechanical and Dry Sliding Wear Behavior10.1080/15440478.2019.1612814 ↗
18. Cellulosic Grewia Optiva Fibers: Towards Chemistry, Surface Engineering and Sustainable Materials10.1016/j.jece.2021.106059 ↗
19. Leao · 1998 · 75510.1007/978-1-4899-0112-5_66 ↗
20. Comparative Experimental Investigation of Natural Fibers Reinforced Light Weight Concrete as Thermally Efficient Building Materials10.1016/j.jobe.2020.101411 ↗
21. Natural Fibers in Concrete–A Review10.1088/1757-899X/1055/1/012038 ↗
22. Friedrich · 2012
23. Compressive Behavior and Fracture Features of Rubber Bearing Glass-Epoxy Composites Exposed to Aqueous Media10.1177/073168401772679138 ↗
24. Influence of Natural Fibers on the Mechanical Properties and Biodegradation of Poly (Lactic Acid) and Poly (ɛ-Caprolactone) Composites: A Review10.1002/pc.22249 ↗
25. Effect of Surface Modification of Grewia Optiva Fibers on Their Physicochemical and Thermal Properties10.1007/s12034-012-0400-9 ↗
26. Effects of Different Relative Humidities on Flax Fibers Prior to Manufacturing Their Composites Based on the Shear Response10.1155/2020/4785970 ↗
27. Effect of Moisture in Flax Fibers on the Quality of Their Composites10.1080/15440478.2017.1414651 ↗
28. Experimental Investigation on Parameter Effects on Fracture Toughness of Hemp Fiber Reinforced Polymer Composites10.1016/j.matpr.2018.06.367 ↗
29. Mode I Fracture Toughness of Bio-Fiber and Bio-Shell Particle Reinforced Epoxy Bio-Composites10.1177/0731684415586277 ↗
30. Fracture Behaviour of Epoxy Biocomposite Reinforced With Short Coconut Fibers (Cocos Nucifera) and Walnut Particles (Juglans regia L.)10.1177/0892705714556835 ↗
31. Optimization of Mode-I Fracture Toughness Using the Taguchi Method in Cellulosic Fiber-Grewia Optiva Reinforced Biocomposites10.1002/app.54395 ↗
32. The Interlaminar and Intralaminar Fracture Toughness of Carbon-Fiber/Polymer Composites: The Effect of Temperature10.1016/S0266-3538(97)00047-X ↗
33. Thermal Degradation of the Mode I Interlaminar Fracture Properties of Stitched Glass Fiber/Vinyl Ester Composites10.1023/A:1004365521648 ↗
34. Mode I Fracture Toughness of CFRP as a Function of Temperature and Strain Rate10.1177/0021998316682309 ↗
35. Effect of Temperature on Mode I Interlaminar Fracture of IM7/PETI-5 and IM7/977-2 Laminates10.1177/0021998308104147 ↗
36. Influence of Mode Ratio and Hygrothermal Condition on the Delamination Toughness of a Thermoplastic Particulate Interlayered Carbon/Epoxy Composite10.1016/j.compositesa.2008.10.006 ↗
37. Olsson · 1992 · 29076
38. Predicting the Flexural Performance of Woven Flax Reinforced Epoxy Composites Using Design of Experiments10.1016/j.mtcomm.2017.10.019 ↗
39. Determining the Optimum Conditions for Silane Treated Rubberwood Flour-Recycled Polypropylene Composites Using Response Surface Methodology10.1016/j.mtcomm.2020.100971 ↗
40. Optimization and Characterization of Surface Treated Lagenaria Siceraria Fiber and Its Reinforcement Effect on Epoxy Composites10.1108/PRT-08-2021-0093 ↗
41. Optimization of Characteristics Polymer Composite Reinforced Kenaf and Jute Fiber Using Taguchi-Response Surface Methodology Approach10.1080/15440478.2023.2204453 ↗
42. Optimization of Mechanical Properties of Bamboo Fiber Reinforced Epoxy Hybrid Nano Composites by Response Surface Methodology10.1007/s12008-023-01215-w ↗
43. Response Surface Methodology for the Optimization of the Effect of Fiber Parameters on the Physical and Mechanical Properties of Deleb Palm Fiber Reinforced Epoxy Composites
44. Effect of Graft Copolymerization on Mechanical, Thermal, and Chemical Properties of Grewia Optiva/Unsaturated Polyester Biocomposites10.1002/pc.22267 ↗
45. Graft Copolymers of Natural Fibers for Green Composites10.1016/j.carbpol.2014.01.016 ↗
46. Effect of Aminopropyltriethoxysilane (APS) Treatment on Properties of Mercerized Lignocellulosic Grewia Optiva Fiber10.1007/s10924-012-0449-y ↗
47. Mechanical, Dielectric and Thermal Properties of Grewia Optiva Fibers Reinforced Unsaturated Polyester Matrix Based Composites10.1016/j.matdes.2013.04.035 ↗
48. Modification of Fibers and Matrices in Natural Fiber Reinforced Polymer Composites: A Comprehensive Review10.1002/marc.202100862 ↗
49. Mechanical Properties of Maleic Anhydride Treated Jute Fiber/Polypropylene Composites10.1179/174328908X314334 ↗
50. Influence of Wet Chemistry Treatment on the Mechanical Performance of Natural Fibers10.2478/v10026-011-0044-3 ↗
51. Effect of Mercerization and Benzoyl Peroxide Treatment on Morphology, Thermal Stability and Crystallinity of Sisal Fibers10.5923/j.textile.20120106.07 ↗
52. Review of Bast Fiber Retting
53. A Novel Bast Fiber Grewia Optiva and the Effect of Mercerization on Its Properties10.17756/nwj.2023-s1-112 ↗
54. Maximum Tangential Stress Coupled With Probabilistic Aspect of Fracture Toughness of Hybrid Bio-Composite10.1016/j.jestch.2018.03.008 ↗
55. ASTM D3039/D3039M · 2002
56. ASTM D790-17 · 2017
57. ASTM D256-10 · 2015
58. ASTM D5045-14 · 2014
59. ASTM D5026-01
60. Experimental Investigation of Water Absorption Behaviour of Sisal Fiber Reinforced Polyester and Sisal Fiber Reinforced Poly Lactic Acid Composites10.1016/j.matpr.2020.11.002 ↗
61. A Review on Natural Fiber Reinforced Polymer Composite and Its Applications10.1155/2015/243947 ↗
62. Date Palm Reinforced Epoxy Composites: Tensile, Impact and Morphological Properties10.1016/j.jmrt.2019.07.004 ↗
63. Void Content, Tensile, Vibration and Acoustic Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Hybrid Composites10.3390/ma12132094 ↗
64. Biocomposites Reinforced With Natural Fibers: 2000–201010.1016/j.progpolymsci.2012.04.003 ↗
65. The Effect of Alkaline Treatment on Mechanical Properties of Kenaf Fibers and Their Epoxy Composites10.1016/j.compositesb.2014.08.025 ↗
66. Effects of Alkali Treatment and Elevated Temperature on the Mechanical Properties of Bamboo Fiber–Polyester Composites10.1016/j.compositesb.2015.05.033 ↗
67. Influence of Moisture Absorption on the Impact Properties of Flax, Basalt and Hybrid Flax/Basalt Fiber Reinforced Green Composites10.1016/j.compositesb.2016.12.018 ↗
68. Interface and Bonding Mechanisms of Plant Fiber Composites: An Overview10.1016/j.compositesb.2016.06.055 ↗
69. Interfacial Bonding Mechanisms of Natural Fiber-Matrix Composites: An Overview10.15376/biores.17.4.Mohammed ↗
70. Humidity Dependence of Fracture Toughness of Cellulose Fibrous Networks10.1016/j.engfracmech.2022.108330 ↗
71. A Review on Plant Fiber Reinforced Thermoset Polymers for Structural and Frictional Composites10.1016/j.polymertesting.2020.106792 ↗
72. Tensile Loading Rate Effect on Mechanical Properties and Failure Mechanisms in Open-Hole Carbon Fiber Reinforced Polymer Composites by Acoustic Emission Approach10.1016/j.compositesb.2018.09.103 ↗
73. Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites10.3390/ma15020506 ↗
74. Multivariate Calibration and Model Integrity for Wood Chemistry Using Fourier Transform Infrared Spectroscopy10.1155/2015/429846 ↗
75. Determination of Hemicellulose, Cellulose, Holocellulose and Lignin Content Using FTIR in Calycophyllum Spruceanum (Benth.) K. Schum and Guazuma Crinita Lam10.1371/journal.pone.0256559 ↗
76. Identification of Dalbergia Cochinchinensis (CITES Appendix II) From Other Three Dalbergia Species Using FT-IR and 2D Correlation IR Spectroscopy10.1007/s00226-016-0815-3 ↗
77. Studies on Physico-Mechanical Behaviour of Kenaf/Glass Fiber Reinforced Epoxy Hybrid Composites10.4314/bcse.v35i1.15 ↗
78. Low Temperature Formation of Aromatic Hydrocarbon From Pyrolysis of Cellulosic Materials10.1016/S0016-2361(01)00063-1 ↗
79. Effects of Fiber Treatment on Morphology, Tensile and Thermogravimetric Analysis of Oil Palm Empty Fruit Bunches Fibers10.1016/j.compositesb.2012.07.027 ↗
80. 16-A Two-Phase Theory of the Absorption of Water Vapour by Cotton Cellulose10.1080/19447022908661486 ↗