journal article·2007-10-01

Chloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels

A. Gironès, M. Anglada, A. Mateo

Publisher page

Abstract

The corrosion fatigue performance of a superduplex stainless steel in two different chloride-bearing solutions (30g∕l and 60g∕lNaCl) is explored in the present paper. Fatigue life results and surface damage analysis show a strong influence of the applied strain amplitude, as well as of the chloride content, on the cyclic response. Moreover, there is an interaction between both factors because corrosion fatigue mechanisms at low and high strain amplitudes are not comparable, since ferrite is only fully plastically active at high strains. Whereas a detrimental effect of the 30g∕lNaCl solution on the fatigue strength is observed, longer fatigue lives were attained in 60g∕lNaCl solution, even longer than in air. Surface damage inspection and residual solutions analysis support a critical anodic dissolution rate, which would act as a polishing effect, as the main reason for this unexpected result.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dept. Ciència dels Materials i Enginyeria Metal.lúrgica, Universitat Politècnica de Catalunya, Avda Diagonal 647, 08028 Barcelona, Spain

References (22)

Show source-provided references
2. Mecanismes d’endommagement en fatigue-corrosion
3. 10 Years Later, Obviously Duplex Grades in Industrial Applications Look Like a Success Story
4. Duplex Stainless Steels: Past, Present and Future
5. Duplex Stainless Steels and Localized Corrosion Resistance
6. SAF 2507 in Seawater
7. Fatigue and Corrosion—Fatigue Behaviour of Duplex Stainless Steels
8. Mechanism of Corrosion Fatigue in Super Duplex Stainless Steel in 3.5 Percent NaCl Solution10.1023/A:1007437813808 ↗
9. Fatigue Behaviour of New Duplex Stainless Steels Upgraded by Nitrogen Alloying10.2355/isijinternational.42.310 ↗
10. Influence of Artificial Seawater on the Cyclic Response of Superduplex Stainless Steels10.1016/j.ijfatigue.2004.06.005 ↗
11. Cyclic Deformation Behaviour of Superduplex Stainless Steels
12. Near Threshold Fatigue Crack Growth
13. Considerations of Allowable Stress of Corrosion Fatigue10.1111/j.1460-2695.1985.tb01198.x ↗
14. Mechanisms of Fatigue Crack Nucleation
15. Corrosion Fatigue Crack Initiation Processes
16. EBSD Studies on the Influence of Texture on the Surface Damage Mechanisms Developed by Aged Duplex Stainless Steels Cyclically Loaded10.1016/j.msea.2004.01.105 ↗
17. Application of the EBSD Technique to Describe the Initiation and Growth Behaviour of Microstructurally Short Fatigue Cracks in a Duplex Steel10.1111/j.0022-2720.2004.01306.x ↗
18. Passive Films on Stainless-Steels-Chemistry, Structure and Growth10.1016/S0013-4686(02)00841-1 ↗
19. Akid, R. , 1987, “The Initiation and Growth of Short Fatigue Cracks in an Aqueous Saline Environment,” Ph.D. thesis, University of Sheffield, UK.
20. Uhlig · 96
21. Corrosion-Fatigue Behaviour of Some Special Stainless Steels
22. In-Situ Electrochemical STM Study of Dissolution Behaviour of Duplex Stainless Steels in Aggressive Solutions