journal article·2017-10-01

Application of a Composite Model in the Analysis of Creep Deformation at Low and Intermediate Temperatures

Xinjun Yang, Xiang Ling

Publisher page

Abstract

The creep behaviors of TA2 and R60702 at low and intermediate temperature were presented and discussed in this paper. Experimental results indicated that an apparent threshold stress was exhibited in the creep deformation of R60702. Meanwhile, the primary creep phase was found as the main pattern in the room temperature creep behavior of TA2. Compared with the exponential law, the power law has been proved to be a proper constitutive model in the description of primary creep phase. It also showed that θ projection method had its significant advantage in the evaluation of accelerated creep stage. Thus, a composite model which combined power law with θ projection method was applied in the creep curves evaluation at low and intermediate temperature. Based on the multiaxial creep deformation results, the model was modified and discussed. A linear relationship existed between composite model parameters and applied load. Finally, the creep life of TA2 and R60702 could be accurately predicted by the composite model, and it is suitable for the application in low and intermediate temperature creep life analysis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, School of Mechanical Engineering, Jiangnan University, Wuxi 214122, Jiangsu, China e-mail

Jiangsu Key Laboratory of Process Enhancement and New Energy Equipment Technology, School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211816, Jiangsu, China

Funding

National Natural Science Foundation of China

References (23)

Show source-provided references
1. The Role of Ferrite in Type 316H Austenitic Stainless Steels on the Susceptibility to Creep Cavitation10.1016/j.msea.2015.03.048 ↗
2. Use of Small Specimen Creep Data in Component Life Management: A Review10.1080/02670836.2015.1132536 ↗
3. Effects of Working Temperature and Carbon Diffusion on the Microstructure of High Pressure Heat-Resistant Stainless Steel Tubes Used in Pyrolysis Furnaces During Service Condition10.1016/j.matdes.2011.07.069 ↗
4. Multiaxial Stress Rupture Behaviour and Stress-State Sensitivity of Creep Damage Distribution in Durehete 1055 and 2.25Cr1Mo Steel10.1016/j.ijpvp.2003.12.023 ↗
5. Creep Deformation in a Modified 9Cr-1 Mo Steel10.1179/026708303225009436 ↗
6. Influence of Zr Content on β-Phase Stability in α-Type Ti–Al Alloys10.1016/j.msea.2015.05.047 ↗
7. Ambient Temperature Creep of Type 304 Stainless Steel10.1115/1.4003110 ↗
8. The Temperature and Stress Dependent Primary Creep of Cp-Ti at Low and Intermediate Temperature10.1016/j.msea.2014.05.094 ↗
9. Relaxation Mechanisms at Grain Boundaries for Ambient-Temperature Creep of H.C.P. Metals10.1016/j.msea.2008.06.055 ↗
10. Distinguishing the Ambient-Temperature Creep Region in a Deformation Mechanism Map of Annealed Cp-Ti10.1016/j.scriptamat.2005.08.045 ↗
11. Suppression of Ambient-Temperature Creep in CP-Ti by Cold-Rolling10.1016/j.msea.2008.08.046 ↗
12. Creep Behavior of Post-Weld Heat Treated 2.25Cr1Mo Ferritic Steel Base, Weld Metal and Weldments10.1016/0921-5093(90)90265-5 ↗
13. Relationships Between Long and Short-Time Creep and Tensile Properties of a Commercial Alloy
14. An Extrapolation Procedure for Long-Term Creep Strain and Creep Life Prediction With Special Reference to 0.5Cr0.5Mo0.25V Ferritic Steels
15. A Constitutive Model for the High-Temperature Creep of Particle-Hardened Alloys Based on the θ Projection Method10.1098/rspa.2000.0539 ↗
16. Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method10.1016/j.msea.2015.09.036 ↗
17. Comparative Analysis of Creep Behavior Prediction of Heat Resistant Steel Based on Theta Projection and Composite Model
18. Creep Properties of Low-Temperature Sintered Nano-Silver Lap Shear Joints10.1016/j.msea.2013.05.001 ↗
19. Finite Element Analysis of Creep Using Theta Project Data10.1016/S0308-0161(98)00038-6 ↗
20. Long-Term Creep Characterization of Gr. 91 Steel by Modified Creep Constitutive Equations10.1007/s12540-011-0630-1 ↗
21. Research on Small Punch Creep Test-Analysis of Creep Stress
22. On the Interpretation of Results From Small Punch Creep Tests10.1243/03093247JSA592 ↗
23. Relationship Between Strain and Central Deflection in Small Punch Creep Specimens10.1016/S0308-0161(03)00069-3 ↗