journal article·2021-01-01

Fracture Behavior of Heavily Cross-Linked Epoxy: Testing, Fractography, and Numerical Modeling

A. Y. Elruby, Stephen M. Handrigan, Sam Nakhla

Publisher page

Abstract

Abstract Heavily cross-linked epoxy was characterized under different types of loading. The scope of work involves detailed testing procedures utilizing high-precision digital image correlation (DIC) system for all strain measurements. Fractographic analyses using scanning electron microscopy (SEM) were also provided. Besides, computed tomography (CT) scans were employed to characterize existing manufacturing imperfections, i.e., voids. Numerical modeling using extended finite element method (XFEM) utilizing the actual microstructure is conducted. Testing results and fractographic analyses showed that microvoids led to failure initiation at micro lengths. An unstable fracture behavior dominated the final failure under different types of loading. Global plastic deformation was observed in the case of uniaxial tension, while local plasticity was observed in specimens under three-point loading. It can be concluded that epoxies failure under a combined state of stresses is sophisticated, and straightforward stress/strain-based failure criteria are not well-suited for failure predictions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering—Ocean and Naval Architectural Engineering, Faculty of Engineering and Applied Science, Memorial University, St. John’s A1B 3X5, NF, Canada

Department of Mechanical Engineering, Faculty of Engineering and Applied Science, Memorial University, St. John’s A1B 3X5, NF, Canada,

Department of Mechanical Engineering, Faculty of Engineering and Applied Science, Emergency Medicine, Faculty of Medicine, Memorial University, St. John’s A1B 3X5, NF, Canada

Funding

Memorial University of Newfoundland · Natural Sciences and Engineering Research Council of Canada

References (39)

Show source-provided references
1. Mallick · 200710.1201/9781420005981 ↗
3. Physical and Mechanical Properties of Polymer Composite With High Content10.1590/1516-1439.009815 ↗
4. Study on Tensile Properties of Nanoreinforced Epoxy Polymer: Macroscopic Experiments and Nanoscale FEM Simulation Prediction10.1155/2013/392450 ↗
5. Identifying Design Parameters Controlling Damage Behaviors of Continuous Fiber-Reinforced Thermoplastic Composites Using Micromechanics as a Virtual Testing Tool10.1016/j.ijsolstr.2017.03.026 ↗
6. Effect of Matrix Voids, Fibre Misalignment and Thickness Variation on Multi-objective Robust Optimization of Carbon/Glass Fibre-Reinforced Hybrid Composites Under Flexural Loading10.1016/j.compositesb.2017.05.022 ↗
7. The Effect of Fiber Misalignment on the Homogenized Properties of Unidirectional Fiber Reinforced Composites10.1016/j.mechmat.2015.10.002 ↗
8. Numerical Modeling of 3-D Inclusions and Voids by a Novel Adaptive XFEM10.1016/j.advengsoft.2016.09.007 ↗
9. The Influence of Void Content on the Structural Flexural Performance of Unidirectional Glass Fibre Reinforced Polypropylene Composites10.1016/j.compositesa.2004.03.007 ↗
10. Photoelastic Study of Stresses in the Vicinity of a Unique Void in a Fibre-Reinforced Model Composite Under Compression10.1016/j.compscitech.2013.04.011 ↗
11. Influence of Voids on the Compressive Failure Behaviour of Fibrereinforced Composites10.1016/j.compscitech.2015.06.020 ↗
12. Computational Modeling of Complex Failure Mechanisms in Laminates10.1177/0021998311410473 ↗
13. Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates10.1007/s10443-014-9413-4 ↗
14. Modeling Progressive Damage Accumulation in Thin Walled Composite Beams for Rotor Blade Applications10.1016/j.compscitech.2005.11.033 ↗
15. Modeling Matrix Cracking in Composite Rotor Blades Within VABS Framework10.1016/j.compstruct.2013.11.012 ↗
16. Analysis of Microstructure Damage in Carbon/Epoxy Composites Using FEM10.1016/j.commatsci.2012.03.033 ↗
17. Fracture Analysis of FRP-Reinforced Beams by Orthotropic XFEM10.1177/0021998311418702 ↗
18. Assessment of the Fundamentals of Failure Theories for Composite Materials10.1016/j.compscitech.2014.10.014 ↗
19. Fard · 2011
20. A General Theory of Strength for Anisotropic Materials10.1177/002199837100500106 ↗
21. A Comparison of the Predictive Capabilities of Current Failure Theories for Composite Laminates, Judged Against Experimental Evidence10.1016/S0266-3538(02)00125-2 ↗
22. Christensen · 2001
23. Isaac · 2013 · 1
24. A New Yield and Failure Theory for Composite Materials Under Static and Dynamic Loading10.1016/j.ijsolstr.2017.08.036 ↗
25. Three-Dimensional Invariant-Based Failure Criteria for Fibre-Reinforced Composites10.1016/j.ijsolstr.2014.03.038 ↗
26. A Fatigue Failure Criterion for Fiber Reinforced Materials10.1177/002199837300700404 ↗
27. Failure Criteria for FRP Laminates10.1177/0021998305046452 ↗
28. Constitutive Behavior and Failure Criteria for Composites Under Static and Dynamic Loading10.1007/s11012-013-9829-1 ↗
29. A Criterion for Crack Initiation in Glassy Polymers Subjected to a Composite-Like Stress State10.1016/S0266-3538(96)00090-5 ↗
30. 3D Damage Characterisation and the Role of Voids in the Fatigue of Wind Turbine Blade Materials10.1016/j.compscitech.2011.11.023 ↗
31. Measurement of Voids in Composites by X-Ray Computed Tomography10.1016/j.compscitech.2013.09.019 ↗
32. Strain Energy Density Based Damage Initiation in Heavily Cross-Linked Epoxy Using XFEM10.1016/j.tafmec.2019.102254 ↗
33. Stress-Initiated Void Formaton During Cure of a Three-Dimensionally Constrained Thermoset Resin10.1002/pen.10746 ↗
34. X-Ray Computed Microtomography of Internal Damage in Fiber Reinforced Polymer Matrix Composites10.1016/j.compscitech.2005.05.014 ↗
35. Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber-Epoxy Composites10.1177/0021998308092211 ↗
36. Advances in Synchrotron Radiation Microtomography10.1016/j.scriptamat.2006.02.012 ↗
37. A Threshold Selection Method From Gray-Level Histograms10.1109/TSMC.1979.4310076 ↗
38. A Comparison of Homogenization and Standard Mechanics Analyses for Periodic Porous Composites10.1007/BF00369853 ↗
39. Simulia · 2013