journal article·2024-01-01

Mechanical Properties and Fracture Resistance of 3D-Printed Polylactic Acid

Deepesh Yadav, Balila Nagamani Jaya

Publisher page

Abstract

Abstract 3D printing is a layer-by-layer deposition process, which results in highly anisotropic structures and contains interfaces. Complex shapes manufactured by 3D printing carry defects. Complete elimination of these defects and interfaces is not possible, and these defects degrade the mechanical properties. In the present study, mechanical properties of printed dog bone samples are quantified as a function of building parameters, in particular, filling patterns, raster angle, and orientation of build direction with respect to that of loading, in polylactic acid (PLA). The tensile strength of 3D-printed PLA is the same for hexagonal and linear pattern filling when the build direction is along thickness and width, and failure was initiated at the defects in the structure, while better overall toughness is offered by hexagonal pattern filling. Build direction along specimen gauge length gives very low tensile strength and toughness, and failure happens between the printing layers. To minimize the defects especially near the grip section, cuboid samples were first deposited and micro-machined by laser into dog bone shape to perform tension test. Tensile strength and elastic modulus of micro-machined samples are surprisingly lower, while failure strain is highest among line filling printed samples. Damage resistance was quantified in terms of work of fracture, and hexagonal filling provided better damage resistance than line filling patterns for conditions of 0 deg raster angle with respect to the crack, whereas line filling with 45 deg and 90 deg raster angle tolerated damage better than hexagonal filling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Indian Institute of Technology Bombay Department of Metallurgical Engineering and Materials Science, , Bombay 400076, Maharashtra , India

References (39)

Show source-provided references
1. Additive Manufacturing of Polyhydroxyalkanoates (PHAs) Biopolymers: Materials, Printing Techniques, and Applications10.1016/j.msec.2021.112216 ↗
2. Medical Applications for 3D Printing: Current and Projected Uses
3. Giffi · 2014 · 28
4. Rapid Prototyping for Architectural Models10.1108/13552540210420961 ↗
5. A Review of Additive Manufacturing10.5402/2012/208760 ↗
6. Mechanical Characterization of 3D-Printed Polymers10.1016/j.addma.2017.12.002 ↗
7. Experimental Characterization and Analytical Modelling of the Mechanical Behaviour of Fused Deposition Processed Parts Made of ABS-M3010.1016/j.commatsci.2013.06.041 ↗
8. Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Parts10.1016/j.matdes.2009.06.016 ↗
9. Anisotropic Material Properties of Fused Deposition Modeling ABS10.1108/13552540210441166 ↗
10. Mechanical Properties of Components Fabricated With Open-Source 3-D Printers Under Realistic Environmental Conditions10.1016/j.matdes.2014.02.038 ↗
11. 3D Printing of Polymer Matrix Composites: A Review and Prospective10.1016/j.compositesb.2016.11.034 ↗
12. Process Parameter Optimization for Fused Deposition Modeling Using Response Surface Methodology Combined With Fuzzy Inference System10.1007/s00170-014-5796-5 ↗
13. Critical Parameters Influencing the Quality of Prototypes in Fused Deposition Modelling10.1016/S0924-0136(01)00980-3 ↗
14. Effect of Process Parameters on Mechanical Properties of 3D Printed PLA Lattice Structures10.1016/j.jcomc.2020.100076 ↗
15. Effects of Fused Deposition Modeling Process Parameters on Tensile, Dynamic Mechanical Properties of 3D Printed Polylactic Acid Materials10.1016/j.polymertesting.2020.106483 ↗
16. Mechanical Properties of 3D Printed Polylactic Acid Product for Various Infill Design Parameters: A Review10.1088/1742-6596/1569/4/042010 ↗
17. Optimization of 3D-Printer Process Parameters for Improving Quality of Polylactic Acid Printed Part10.21817/ijet/2017/v9i2/170902044 ↗
18. Optimization of FDM Process Parameters for Tensile Properties of Polylactic Acid Specimens Using Taguchi Design of Experiment Method10.1177/0892705720964560 ↗
19. Optimization of Properties for 3D Printed PLA Material Using Taguchi, ANOVA and Multi-Objective Methodologies10.1016/j.prostr.2021.12.011 ↗
20. Mechanical Properties of PLA-Graphene Filament for FDM 3D Printing10.1007/s00170-019-03532-5 ↗
21. The Impact of Print Orientation and Raster Pattern on Fracture Toughness in Additively Manufactured ABS10.1016/j.addma.2017.09.003 ↗
22. The Effect of In-Plane Layer Orientation on Mixed-Mode I-II Fracture Behavior of 3D-Printed Poly-Carbonate Specimens10.1016/j.engfracmech.2020.107018 ↗
23. Mechanical Property of FDM Printed ABS: Influence of Printing Parameters10.1007/s00170-019-03313-0 ↗
24. Fracture Behavior of Additively Manufactured Acrylonitrile Butadiene Styrene (ABS) Materials10.1016/j.engfracmech.2017.03.028 ↗
25. The Influence of In-Plane Raster Angle on Tensile and Fracture Strengths of 3D-Printed PLA Specimens10.1016/j.engfracmech.2020.107225 ↗
26. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments10.1108/13552540810862028 ↗
27. Experimental Investigation and Empirical Modelling of FDM Process for Compressive Strength Improvement10.1016/j.jare.2011.05.001 ↗
28. Numerical and Experimental Studies of Additively Manufactured Polymers for Enhanced Fracture Properties10.1016/j.engfracmech.2018.11.001 ↗
29. Morse-Code Inspired Architectures for Tunable Damage Tolerance in Brittle Material Systems10.1557/s43578-022-00520-6 ↗
30. The Work of Fracture and its Measurement in Metals, Ceramics and Other Materials10.1007/BF00550177 ↗
31. Fracture Energy of Concrete: Practical Performance and Experimental Results10.1016/0008-8846(80)90055-1 ↗
32. The Work-of-Fracture of Brittle Materials: Principle, Determination, and Applications10.1557/JMR.1994.1412 ↗
33. The Essential Work of Fracture (EWF) Method—Analyzing the Post-Yielding Fracture Mechanics of Polymers10.1016/j.engfailanal.2009.04.027 ↗
34. Courtney · 2009
35. Impact of Severe Plastic Deformation on Microstructure and Fracture Toughness Evolution of a Duplex-Steel10.1016/j.msea.2017.07.062 ↗
36. Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process10.1016/S1526-6125(04)70071-7 ↗
37. Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products10.1007/s11340-018-00467-y ↗
38. Mechanical Properties of FDM Printed PLA Parts Before and After Thermal Treatment10.3390/polym13081239 ↗
39. Effect of Heat Treatment on Mechanical Properties of 3D Printed PLA10.1016/j.jmbbm.2021.104764 ↗