journal article·2025-07-01

Computational Prediction of Total Fatigue Life With an Integrated Approach

Siqi Li, Zhong Zhang, Rong Liu, Xijia Wu

Publisher page

Abstract

Abstract This research tackles the fundamental issue of computational fatigue studies by developing an effective approach that combines the crystal plasticity finite element method (CPFEM) with the Tanaka–Mura–Wu (TMW) model for crack nucleation and the Tomkins model for fatigue crack propagation, to provide Class-A predictions of the total coupon-fatigue life (crack initiation and growth lives) for a nickel-based superalloy, Haynes 282. To gain a statistical significance accounting for the microstructure inhomogeneity, 11 3D Representative Volume Elements (RVEs) are created utilizing Dream.3d to represent the polycrystalline material with different grain structures and orientations in equivalence to the experimental microstructure data. The CPFEM model is calibrated to the material's hysteresis behavior, and then, the microstructural plastic strain from the RVE is taken to calculate the fatigue life. The prediction is found in good agreement with the fatigue test data, validating the effectiveness of the proposed approach in predicting the fatigue life and scatter due to microstructural variability for Haynes 282 alloy. In addition, the effects of local grain attributes including grain orientation and adjacent grain arrangement on fatigue crack nucleation are analyzed quantitatively. It is suggested that grain orientation influences plastic deformation by inducing the active slip systems, and the slip transfer across grain boundaries also contributes to fatigue crack nucleation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Carleton University Department of Mechanical, and Aerospace Engineering, , 1125 Colonel By Drive, , ,

National Research Council Canada Structures and Materials Performance Laboratory, Aerospace Research Centre, , , ,

References (58)

Show source-provided references
1. Bowles · 1996 · 10
2. The Exponential Law of Endurance Test
3. Behaviour of Materials Under Conditions of Thermal Stress
4. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal10.1115/1.4015020 ↗
5. Cyclic Plastic Strain Energy and Fatigue of Metals10.1520/STP43764S ↗
6. Failure of Materials Under Combined Repeated Stresses with Superimposed Static Stress
7. Sines · 1959 · 145
8. Effect of Large Hydrostatic Pressure on the Torsional Fatigue Strength of An Alloy Steel
9. A Theory for the Effect of Mean Stress on Fatigue of Metals Under Combined Torsion and Axial Load or Bending10.1115/1.4008327 ↗
10. A General Criterion for High Cycle Multiaxial Fatigue Failure10.1111/j.1460-2695.1991.tb00673.x ↗
11. A Shear Stress Based Critical-Plane Criterion of Multiaxial Fatigue Failure for Design and Life Prediction10.1111/j.1460-2695.1994.tb00789.x ↗
12. A Theory for Fatigue Failure Under Multiaxial Stress-Strain Conditions10.1243/PIME_PROC_1973_187_161_02 ↗
13. Biaxial Low-Cycle Fatigue Fracture of 316 Stainless Steel at Elevated Temperatures
14. A Path Independent Parameter for Fatigue Under Proportional and Non Proportional Loading10.1111/j.1460-2695.1993.tb00739.x ↗
15. A Criterion for Low-Cycle Fatigue Failure Under Biaxial States of Stress10.1115/1.3224968 ↗
16. An Energy-Based Critical Fatigue Life Prediction Method for AL6061-T610.1111/j.1460-2695.2011.01669.x ↗
17. A Multiaxial Fatigue Strain Energy Density Parameter Related to The Critical Fracture Plane10.1111/j.1460-2695.1995.tb00140.x ↗
18. Mean Stress Effects in Multi-Axial Fatigue10.1111/j.1460-2695.1995.tb00901.x ↗
19. Generalization of Cumulative Damage Criterion to Multilevel Cyclic Loading10.1016/0167-8442(87)90032-2 ↗
20. A Stress-Strain Function for the Fatigue of Metals
21. A Critical Plane to Multiaxial Fatigue Damage Including Out-of-Phase Loading10.1111/j.1460-2695.1988.tb01169.x ↗
22. Is Stored Energy Density the Primary Meso-Scale Mechanistic Driver for Fatigue Crack Nucleation10.1016/j.ijplas.2017.11.005 ↗
23. Comparative Assessment of Dissipated Energy and Other Fatigue Criteria10.1016/j.ijfatigue.2007.01.007 ↗
24. Microstructure-Sensitive Critical Plastic Strain Energy Density Criterion for Fatigue Life Prediction Across Various Loading Regimes10.1098/rspa.2019.0766 ↗
25. Examining Metrics for Fatigue Life Predictions of Additively Manufactured IN718 via Crystal Plasticity Modeling Including the Role of Simulation Volume and Microstructural Constraints10.1016/j.msea.2020.139312 ↗
26. Low-Cycle Fatigue Life Prediction of a Polycrystalline Nickel-Base Superalloy Using Crystal Plasticity Modelling Approach10.1016/j.jmst.2019.05.072 ↗
27. High- and Low-Cycle Fatigue Crack Initiation Using Polycrystal Plasticity10.1098/rspa.2003.1258 ↗
28. Microstructure-Sensitive Fatigue Crack Nucleation in a Polycrystalline Ni Superalloy10.1016/j.ijfatigue.2016.04.013 ↗
29. Crystal Plasticity Finite-Element Modelling of Cyclic Deformation and Crack Initiation in a Nickel-Based Single Crystal Superalloy Under Low-Cycle Fatigue10.1111/ffe.13228 ↗
30. A Dual-Scale Modelling Approach for Creep-Fatigue Crack Initiation Life Prediction of Holed Structure in a Nickel-Based Superalloy10.1016/j.ijfatigue.2021.106522 ↗
31. Stored Energy Density Research on the Fatigue Crack Initiation at Twin Boundary and Life Prediction of Inconel718 Superalloy10.1016/j.ijfatigue.2023.107590 ↗
32. Tanaka-Mura a Dislocation Model for Fatigue Crack Initiation10.1115/1.3157599 ↗
33. On Tanaka-Mura's Fatigue Crack Nucleation Model and Validation10.1111/ffe.12736 ↗
34. Wu · 2019 · 22910.1201/b22348-9 ↗
35. Full-Range Fatigue Life Prediction of Metallic Materials Using Tanaka-Mura-Wu Model10.4271/05-15-02-0010 ↗
36. Microstructure-Based Computational Fatigue Life Prediction of Haynes 282 Alloy10.1007/s11665-023-07929-y ↗
37. A Theory of the Yielding and Plastic Flow of Anisotropic Metals
38. A User-Material Subroutine Incorporating Single Crystal Plasticity in the Abaqus Finite Element Program
39. Modeling and Simulation of Microstructurally Small Crack Formation and Growth in Notched Nickel-Base Superalloy Component10.1016/j.jmst.2013.09.011 ↗
40. Shear Band Formation in Plane Strain Compression10.1016/0001-6160(88)90193-9 ↗
41. Material Rate Dependence and Localized Deformation in Crystalline Solids10.1016/0001-6160(83)90014-7 ↗
42. A Mathematical Representation of the Multiaxial Bauschinger Effect10.3184/096034007X207589 ↗
43. DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D10.1186/2193-9772-3-5 ↗
44. Experimental Observations and Modelling of Cyclic and Relaxation Behaviour of the Ni-Based Superalloy Haynes 28210.1016/j.ijfatigue.2016.01.027 ↗
45. Charles · 1996 · 597
46. Surface Free Energies of Sold Metals Estimation From Liquid Surface Tension Measurements10.1016/0039-6028(77)90442-3 ↗
47. Development of Integrated Framework for Fatigue Life Prediction in Welded Structures10.1016/j.engfracmech.2017.11.012 ↗
48. The Role of Elastic Anisotropy, Length Scale and Crystallographic Slip in Fatigue Crack Nucleation10.1016/j.jmps.2013.01.001 ↗
49. The Effect of Crystal Orientation on Fretting Fatigue Crack Formation in Ni-Based Single-Crystal Superalloys: In-Situ SEM Observation and Crystal Plasticity Finite Element Simulation10.1016/j.triboint.2018.01.011 ↗
50. The Development of Fatigue Crack Propagation Models for Engineering Applications at Elevated Temperatures10.1115/1.3443301 ↗
51. Description of Stress–Strain Curves by Three Parameters
52. The Distribution of Stress in Neighborhood of a Crack in a Elastic Solid
53. Saha · 2015 · 23
54. On the Origins of Fatigue Strength in Crystalline Metallic Materials10.1126/science.abn0392 ↗
55. American Society for Testing and Materials E739 · 2015 · 1
56. Reid · 1973 · 145
57. Compatibility of Deformation in Two-Phase Ti-Al Alloys: Dependence on Microstructure and Orientation Relationships10.1007/BF02670762 ↗
58. Grain Boundaries and Interfaces in Slip Transfer10.1016/j.cossms.2014.05.003 ↗