Densification of Porous Stainless-Steel SLS Components During Cold Isostatic Pressing
Source abstract
Abstract
The process that combines selective laser sintering (SLS) and cold isostatic pressing (CIP) can manufacture nearly fully dense metal components with complex geometries. However, the SLS component will shrink to a significant extent during the CIP process. The modified cam-clay model was used to describe the constitutive equation of porous stainless-steel SLS components. The densification process of SLS porous components was simulated using the finite element method. The visual distributions of shape change, displacement, density, and stress were obtained, which showed that SLS components shrank with the same shape as the original design over the CIP process. In addition, a relative uniform density distribution appeared in cold isostatic pressed components. The experiment measurements displayed that the shrinkage rate of SLS components during the CIP process in height direction was a little higher than that on the forming plane due to the layer-by-layer manufacturing process of SLS. On the forming plane, the dimensional errors between simulations and experiments for the cuboid and the gear components are lower than 1% and 3%, respectively. However, the errors in height direction of the two components increase to the range of 6% and 9%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
References (18)
Show source-provided references
1. Rubber Isostatic Pressing and Cold Isostatic Pressing of Metal Powder10.1016/j.msea.2004.04.056 ↗
2. Manufacturing Near Dense Metal Components Via Indirect Selective Laser Sintering Combined With Isostatic Pressing10.1007/s00339-007-4159-6 ↗
3. Effect of Friction Between Powder and a Mandrel on Densification of Iron Powder During Cold Isostatic Pressing10.1016/S0020-7403(97)00063-5 ↗
4. Plasticity Theory for Porous Metals10.1016/0020-7403(76)90030-8 ↗
5. The Effect of a Rubber Mold on Densification and Deformation of a Metal Powder Compact During Cold Isostatic Pressing10.1016/S0921-5093(01)01328-4 ↗
6. Finite Element Modelling of Cold Isostatic Pressing10.1016/S0955-2219(99)00280-0 ↗
7. Bag Design in Isostatic Pressing10.1016/S0261-3069(99)00076-X ↗
8. Ogden
9. Finite Element Simulation of Cold Isostatic Pressing and Sintering of SiC Components10.1016/S0272-8842(03)00086-5 ↗
10. Generalized Cap Model for Geological Materials10.1061/AJGEB6.0000293 ↗
11. Visualizing Isostatic Pressing of Ceramic Powders Using Finite Element Analysis10.1016/j.jeurceramsoc.2005.03.256 ↗
12. A Study on the Cap Model for Metal and Ceramic Powder Under Cold Compaction10.1016/j.msea.2006.09.013 ↗
13. Annealing of Cold-Worded Austenitic Stainless Steels10.2355/isijinternational.43.135 ↗
14. On the Generalized Behaviour of “Wet” Clay
15. A Variational Cam-Clay Theory of Plasticity10.1016/j.cma.2003.08.008 ↗
16. Plastic Collapse in Non-Associated Hardening Materials With Application to Cam-Clay10.1016/j.ijsolstr.2006.11.026 ↗
17. ABAQUS User’s Manual
18. Optimisation Procedure for Choosing Cam-Clay Parameters10.1016/j.compgeo.2007.01.007 ↗