journal article·2025-10-01

Tensile Tests of Different Families of Ultra-Lightweight Photosensitive Polymer Microlattices

Louis Catar, Ilyass Tabiai, David St-Onge

Publisher page

Abstract

Abstract In aerospace applications, achieving lightweight designs is crucial for optimal performance, often necessitating the use of materials with the best stiffness-to-mass ratios when budget permits. At the design level, polymeric microlattice structures can further optimize parts, but their manufacturing remains challenging. Their use in the aerospace industry is still limited due to insufficient knowledge of the mechanical properties associated with machines, materials, and geometrical parameters. This article investigates and cross-compares different photosensitive printing technologies and families of microlattices. We explore how specific microlattice patterns can be utilized to achieve desired structural behaviors beyond the inherent properties of the raw materials. Given the highly intertwined structural effects at micro, meso, and macroscopic levels due to the material addition process in additive manufacturing (AM), our study focuses on UV-based AM technologies for their accessibility and high resolution. Accurate knowledge of mechanical properties is essential for the design process, yet material datasheets often lack standardized information. Therefore, we extend the characterization of UV resin microlattices through extensive experimental testing. We analyze the results of a comprehensive tensile test campaign on various microlattice patterns using digital image correlation to reveal strain distribution within specimens during damage evolution. Our findings provide a more in-depth understanding of multiscale mechanical property propagation across micro, meso, and macroscopic levels in AM of microlattices, thanks to an assessment of the mechanical properties of each resin used and the characterization of the anisotropy of each 3D printer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Synthesis and properties of polymers · Silicone and Siloxane Chemistry · Photopolymerization techniques and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

École de Technologie Supérieure INIT Robots, Department of Mechanical Engineering, , , ,

École de Technologie Supérieure LIPEC, Department of Mechanical Engineering, , , ,

Funding

Fonds de Recherche du Québec - Nature et Technologies · Natural Sciences and Engineering Research Council of Canada

References (51)

Show source-provided references
1. Tripathi · 2022 · 429
2. An Overview on 3D Printing Technology: Technological, Materials, and Applications10.1016/j.promfg.2019.06.089 ↗
3. Thomas · 2019
4. Ultralight, Ultrastiff Mechanical Metamaterials10.1126/science.1252291 ↗
5. Macro-, Meso- and Microstructural Characterization of Metallic Lattice Structures Manufactured by Additive Manufacturing Assisted Investment Casting10.1038/s41598-021-84524-y ↗
6. SLM Lattice Structures: Properties, Performance, Applications and Challenges10.1016/j.matdes.2019.108137 ↗
7. An Investigation Into the Compressive Properties of Stainless Steel Micro-Lattice Structures10.1177/1099636210380997 ↗
8. Drop Weight Impact Behaviour of Sandwich Panels With Metallic Micro Lattice Cores10.1016/j.ijimpeng.2013.04.007 ↗
9. Static Mechanical Behaviours of Stainless Steel Micro-Lattice Structures Under Different Loading Conditions10.1016/j.msea.2013.07.070 ↗
10. Strain Concentrations in BCC Micro Lattices Obtained by AM10.1016/j.prostr.2017.11.074 ↗
11. A Multi-Cell Hybrid Approach to Elevate the Energy Absorption of Micro-Lattice Materials10.3390/ma13184083 ↗
12. Experimental and Numerical Investigation on Lattice Structures Fabricated by Selective Laser Melting Process Under Quasi-Static and Dynamic Loadings10.1007/s00170-020-06112-0 ↗
13. Manufacturing and Characterization of 3D Miniature Polymer Lattice Structures Using Fused Filament Fabrication10.3390/polym13040635 ↗
14. Review of Mechanics and Applications of Auxetic Structures10.1155/2014/753496 ↗
15. Auxetic Materials10.1243/09544100JAERO185 ↗
16. Multi-Axial Failure of Metallic Strut-lattice Materials Composed of Short and Slender Struts10.1016/j.ijsolstr.2005.12.001 ↗
17. Numerical Comparison of Lattice Unit Cell Designs for Medical Implants by Additive Manufacturing10.1080/17452759.2018.1491713 ↗
18. Design and Analysis of Strut-Based Lattice Structures for Vibration Isolation10.1016/j.precisioneng.2017.09.010 ↗
19. Finite Element Modelling of Defects in Additively Manufactured Strut-Based Lattice Structures10.1016/j.addma.2021.102301 ↗
20. Effective Strut-Based Design Approach of Multi-Shaped Lattices Using Equivalent Material Properties10.1007/s12206-021-0324-7 ↗
21. Continuum Modeling of Three-Dimensional Truss-Like Space Structures10.2514/3.7581 ↗
22. Analysis of Strain and Stress Concentrations in Micro-Lattice Structures Manufactured by SLM10.1108/RPJ-10-2018-0270 ↗
23. Ti–6Al–4V Triply Periodic Minimal Surface Structures for Bone Implants Fabricated Via Selective Laser Melting10.1016/j.jmbbm.2015.06.024 ↗
24. Review of Triply Periodic Minimal Surface (TPMS) based Heat Exchanger Designs
25. Insights Into the Mechanical Properties of Several Triply Periodic Minimal Surface Lattice Structures Made by Polymer Additive Manufacturing10.1016/j.polymer.2017.11.049 ↗
26. Voronoi Diagrams—A Survey of a Fundamental Geometric Data Structure10.1145/116873.116880 ↗
27. Application of Voronoi Diagrams in Contemporary Architecture and Town Planning
28. Stability of Statics Aware Voronoi Grid-Shells10.1016/j.engstruct.2016.02.049 ↗
29. Metallic Microlattice Materials: A Current State of the Art on Manufacturing, Mechanical Properties and Applications10.1016/j.matdes.2016.01.146 ↗
30. Deep Learning and Design for Additive Manufacturing: A Framework for Microlattice Architecture10.1007/s11837-020-04131-6 ↗
31. Kisgergely · 2020
32. An Overview of Additive Manufacturing (3D Printing) for Microfabrication10.1007/s00542-017-3342-8 ↗
33. Experimental and Theoretical Investigation on Ultra-thin Powder Layering in Three Dimensional Printing (3DP) by a Novel Double-Smoothing Mechanism10.1016/j.jmatprotec.2015.01.016 ↗
34. Additive Manufacturing of Structural Materials10.1016/j.mser.2020.100596 ↗
35. A Review on Polyjet 3D Printing of Polymers and Multi-Material Structures10.1177/09544062221079506 ↗
36. Post-Processing of 3D-Printed Polymers10.3390/technologies9030061 ↗
37. Effect of Post-Processing Conditions on Polyacrylate Materials Used in Stereolithography10.1016/j.addma.2022.102813 ↗
38. Fracture Toughness and Tensile Strength of 316L Stainless Steel Cellular Lattice Structures Manufactured Using the Selective Laser Melting Technique10.1016/j.msea.2016.05.075 ↗
39. Simulation and Optimization of the Load Introduction Geometry of Additively Manufactured Lattice Structure Specimens
40. Measurement of Deformation Heterogeneities in Additive Manufactured Lattice Materials by Digital Image Correlation: Strain Maps Analysis and Reliability Assessment10.1016/j.jmbbm.2018.07.010 ↗
41. Topology Optimization and Characterization of Ti6Al4V ELI Cellular Lattice Structures by Laser Powder Bed Fusion for Biomedical Applications10.1016/j.msea.2019.138330 ↗
42. The Compressive Response of Additively-Manufactured Hollow Truss Lattices: An Experimental Investigation10.1007/s00170-022-08716-0 ↗
43. Balaji · 2022
44. Design of High Altitude Long Endurance UAV: Structural Analysis of Composite Wing Using Finite Element Method10.1088/1742-6596/1005/1/012025 ↗
45. In-Situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load10.1007/s11340-018-0429-9 ↗
46. Digital Image Correlation10.1016/S1369-7021(10)70235-2 ↗
47. Turner · 2015
48. Ayachit · 2015
49. Physical Properties of Partially Cross-Linked RTM6 Epoxy Resin
50. Additive Manufacturing Strategy for Ultra-Lightweight High Value-Added Components10.1115/DETC2022-88458 ↗
51. Influence of Layer Height, Build Orientation and Post Curing on Tensile Mechanical Properties of SLA 3D Printed Material