Corrosion Fatigue of AZ91E-T6 Cast Magnesium Alloy in a 3.5 Percent NaCl Aqueous Environment
Source abstract
Abstract
The objective of this research was to obtain and compare constant and variable amplitude fatigue behavior of AZ91E-T6 cast magnesium alloy in both an air and 3.5 percent NaCl aqueous corrosive environment. An additional objective was to determine if commonly used models that describe fatigue behavior and fatigue life are applicable to this material and test environment. Fatigue tests included constant amplitude strain-controlled low cycle fatigue with strain ratio, R, equal to 0, −1 and −2, Region II constant amplitude fatigue crack growth with load ratio, R, equal to 0.05 and 0.5 and variable amplitude fatigue tests using keyhole notched specimens. In all fatigue tests, the corrosion environment was significantly detrimental relative to the air environment. Mean strains influenced fatigue life only if accompanied by significant mean stress. The Morrow and Smith, Watson, and Topper mean stress models provided both accurate and inaccurate fatigue life calculations. Likewise, variable amplitude fatigue life calculations using the local strain approach and based upon the formation ofal mm crack at the keyhole notch were both accurate and fairly inaccurate depending on the specific model used.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, The University of Iowa, lowa City, IA 52242
References (10)
Show source-provided references
1. Glinka G. , 1985, “Energy Density Approach to Calculation of Inelastic Strain-Stress Near Notches and Cracks,” Engineering Fracture Mechanics, Vol. 22, No. 3, pp. 485–508.10.1016/0013-7944(85)90148-1 ↗
2. Goodenberger D. L. , and StephensR. I., 1993, “Fatigue of AZ91-T6 Cast Magnesium Alloy,” Journal of Materials and Technology, Vol. 115, pp. 391–397.10.1115/1.2904236 ↗
3. Graham, J. A., 1968, ed., Fatigue Design Handbook, Society of Automotive Engineers, Vol. 4.
4. Lease, K. B., and Stephens, R. I., 1991, “Verification of Variable Amplitude Fatigue Life Methodologies for a Cast Aluminum Alloy,” SAE, Paper No. 910163.10.4271/910163 ↗
5. Liaw P. K. , HartmannH. R., and HelmE. J., 1983, “Corrosion Fatigue Crack Propagation Testing with the Krak-Gage® in Salt Water,” Engineering Fracture Mechanics, Vol. 18, No. 1, pp. 121–131.10.1016/0013-7944(83)90101-7 ↗
6. LifEst, 1988, Software Users Manual, SoMat Corporation.
7. Neuber H. , 1961, “Theory of Stress Concentration for Shear-Strained Prismatical Bodies with Arbitrary Nonlinear Stress-Strain Laws,” ASME Journal of Applied Mechanics, Vol. 28, pp. 544–550.10.1115/1.3641780 ↗
8. Perov S. N. , OgarevicV. V., and StephensR. I., 1993, “Application and Verification of Fatigue Life Calculation Methods for AZ91E-T6 Cast Magnesium Alloy Under Variable Amplitude Loading,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, pp. 385–390.10.1115/1.2904235 ↗
9. Smith K. N. , WatsonP., and TopperT. M., 1970, “A Stress-Strain Function for the Fatigue of Metals,” Journal of Materials, Vol. 5, No. 4, pp. 767–778.
10. Stephens, R. I., Schrader, C. D., Goodenberger, D. L., Lease, K. B., Ogarevic, V. V., and Perov, S. N., 1993, “Corrosion Fatigue and Stress Corrosion Cracking of AZ91E-T6 Cast Magnesium Alloy in a 3.5% NaCl Solution,” SAE paper number 930752.10.4271/930752 ↗