Yield Strength Asymmetry Predictions From Polycrystal Elastoplasticity
Source abstract
Abstract
Since the 1960s, it has been known that elastoplastic polycrystal models predict asymmetries in the yield strength for polycrystals that have been prestrained. After prestraining in tension, a model polycrystal exhibits Bauschinger-like behavior in that it yields in compression at a lower stress magnitude than in tension. Furthermore, the knee of the reloading stress-strain curve is more gradual for compression than for tension. The origins of these behaviors reside in the assumption that links the macroscopic deformation to the deformations in individual crystals. More precisely, the reloading response is biased by the residual stress field which is induced with plastic straining by the anisotropy of the single crystal yield surface. While the earlier work pointed to the polycrystalline origins of the asymmetry, it did not resolve the degree to which the particular linking assumption affects the amount of asymmetry. However, due to the strong influence of the linking assumption on the crystal stresses, the sensitivity of the asymmetry to the linking assumption is expected to be appreciable. In this paper we examine the influence of the linking assumption on the magnitude of the computed yield strength asymmetry of prestrained polycrystals. Elastoplastic polycrystal simulations based on upper bound (Taylor) and lower bound (equilibrium-based) linking assumptions are compared to finite element computations in which elements constitute individual crystals. The finite element model maintains compatibility while satisfying equilibrium in a weak sense and treats the influence of neighboring crystals explicitly. The strength of the predicted Bauschinger effect does depend on the linking assumption, with ‘compatibility first’ models developing stronger yield strength asymmetries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Elasticity and Material Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853
References (24)
Show source-provided references
1. Beaudoin A. J. , DawsonP. R., MathurK. K., KocksU. F., and KorzekwaD. A., 1994, “Application of Polycrystalline Plasticity to Sheet Forming,” Compt. Methods. Appl. Mech. & Eng., Vol. 117, pp. 49–70.10.1016/0045-7825(94)90076-0 ↗
2. Czyzak S. J. , BowN., and PayneH., 1961, “On the Tensile Stress-Strain Relation and the Bauschinger Effect for Polycrystalline Materials from Taylor’s Model,” J. Mech. Phys. Solids, Vol. 9, pp. 63–66.10.1016/0022-5096(61)90039-4 ↗
3. Dawson, P. R., Miller, M. P., and Turner, T. J., 1998, “Quantification and Interpolation of Texture and its Gradients in Rolled Aluminum Plate,” T. R. Bieler, L. A. Lalli, S. R. MacEwen, editors. Hot Deformation of Aluminum Alloys II, pp. 355–361, Rosemong, IL, TMS.
4. Van Houtte, P., and Wagner, F., 1985, “Development of Textures by Slip and Twinning,” Hans-Rudolf Wenk, editor. Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis, Chapter 11, Academic Press, Inc.10.1016/B978-0-12-744020-0.50016-X ↗
5. Hughes T. J. R. and WingetJ., 1980, “Finite Rotation Effects in Numerical Integration of Rate Constitutive Equations Arising in Large-Deformation Analysis,” Int. J. Num. Meth. Eng., Vol. 15, No. 12, pp. 1862–1867.10.1002/nme.1620151210 ↗
6. Hutchinson J. W. , 1964a, “Plastic Deformation of B.C.C. Polycrystals,” J. Mech. Phys. Solids, Vol. 12, pp. 25–33.10.1016/0022-5096(64)90004-3 ↗
7. Hutchinson J. W. , 1964b, “Plastic Stress-Strain Relations of F.C.C. Polycrystalline Metals Hardening According to Taylor’s Rule,” J. Mech. Phys. Solids, Vol. 12, pp. 11–24.10.1016/0022-5096(64)90003-1 ↗
8. Hutchinson J. W. , 1970, “Elastic-Plastic Behavior of Polycrystalline Metals and Composites,” Proc. Roy. Soc. Lond. A, Vol. 319, pp. 247–272.10.1098/rspa.1970.0177 ↗
9. Kelly, A., and Groves, G. W., 1970, Crystallography and Crystal Defects, Tech. Books, Herndon, VA.
10. Kocks U. F. , 1970, “The Relation Between Polycrystal Deformation and Single-Crystal Deformation,” Met. Trans., Vol. 1, pp. 1121–1143.10.1007/BF02900224 ↗
11. Kocks U. F. , DawsonP. R., and FressengeasC., 1994, “Kinematics of Plasticity Related to the State and Evolution of the Material Microstructure,” Journal of the Mechanical Behavior of Materials, Vol. 5, No. 2, pp. 107–128.10.1515/JMBM.1994.5.2.107 ↗
12. Kocks, U. F., Tome´, C. N., and Wenk, H.-R., editors, 1998, Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties, Cambridge University Press.
13. Kumar A. , and DawsonP. R., 1998, “Modeling Crystallographic Texture Evolution with Finite Elements Over Neo-Eulerian Orientation Spaces,” Compt. Methods Appl. Mech. & Eng., Vol. 153, pp. 259–302.10.1016/S0045-7825(97)00072-8 ↗
14. Maniatty A. M. , and YuJ.-S., 1996, “Effect of Elasticity on Slip System Activity in Face-Centered Cubic Crystals: A Numerical Study,” Int. J. Solids Struct., Vol. 33, No. 8, pp. 1069–1082.10.1016/0020-7683(95)00071-2 ↗
15. Marin E. B. , and DawsonP. R., 1998a, “Elastoplastic Finite Element Analyses of Metal Deformations Using Polycrystal Constitutive Models,” Compt. Methods Appl. Mech. & Eng., Vol. 165, Nos. 1–4, pp. 23–41.10.1016/S0045-7825(98)00033-4 ↗
16. Marin E. B. , and DawsonP. R., 1998b, “On Modeling the Elasto-Viscoplastic Response of Metals Using Polycrystal Plasticity,” Compt. Methods Appl. Mech. & Eng., Vol. 165, Nos. 1–4, pp. 1–21.10.1016/S0045-7825(98)00034-6 ↗
17. Marsden, J. E., and Hughes, T. J. R., 1983, Mathematical Foundations of Elasticity, Dover.
18. Miller, M. P., Harley, E. J., and Bammann, D. J., 1998, “Reverse Yield Experiments and Internal Variable Evolution in Polycrystalline metals,” Int. J. Plasticity, in press.10.1016/S0749-6419(98)00046-1 ↗
19. Payne H. , and CzyzakS. J., 1960, “On the Torsion of a Thin-Wall Cylinder Following a Plastic Extension,” J. Mech. Phys. Solids, Vol. 8, pp. 39–44.10.1016/0022-5096(60)90003-X ↗
20. Peirce D. , AsaroR. J., and NeedlemanA., 1982, “An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals,” Acta Metall, Vol. 30, pp. 1087–1119.10.1016/0001-6160(82)90005-0 ↗
21. Simo, J. C., and Quoc, L. Vu, 1985, “Three Dimensional Finite Strain Rod Model Part II: Computational Aspects, Memorandum No. UCB/ERL M85/31,” Technical report. Electronics Research Laboratory, College of Engineering, University of California, Berkeley.
22. Sowerby R. , UkoD. K., and TomitaY., 1979, “A Review of Certain Aspects of the Bauschinger Effect in Metals,” Mater. Sci. Eng., Vol. 41, pp. 43–58.10.1016/0025-5416(79)90043-0 ↗
23. Tome´, Carlos, 1998, “Tensor Properties of Textured Polycrystals,” Kocks et al. chapter 7.
24. Zouhal N. , MolinariA., and To´thL. S., 1996, “Elastic-Plastic Effects During Cyclic Loading as Predicted by the Taylor-Lin Model of Polycrystal Elastoviscoplasticity, Int J Plasticity, Vol. 12(3), pp. 343–360.10.1016/S0749-6419(96)00011-3 ↗