journal article·1994-04-01

On the Propagation of a Shear Band in a Steel Tube

R. C. Batra, Xiangtong Zhang

Publisher page

Abstract

Marchand and Duffy tested thin-walled steel tubes in a split Hopkinson torsion bar at a nominal strain-rate of approximately 1600/s and could not determine conclusively whether a shear band initiating at a point in the tube propagated around the circumference in one direction or in both directions. They estimated the speed of propagation to be 520 m/s in the former case and 260 m/s in the latter. Here we simulate their test numerically, and find that the shear band propagates in both directions around the circumference of the tube. When the tube is twisted at a nominal strain-rate of 5000/s, the band speed varies from 180 m/s at the site of the initiation to approximately 1000 m/s at the nearly diametrically opposite point. The band speed increases with an increase in the nominal strain-rate. The material defect is modeled by assuming that a small region near the center of the tubular surface is made of a material weaker than that of the rest of the tube.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Laser-Plasma Interactions and Diagnostics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering and Engineering Mechanics, University of Missouri-Rolla, Rolla, MO 65401-0249

References

Reference metadata was not supplied for this record.