Identification of Hardening Parameters of Metals From Spherical Indentation Tests
Source abstract
Abstract
The identification method of hardening parameters specifying stress-strain curve is proposed by applying spherical indentation test and measuring the penetration depth during loading and unloading. The loading program is composed of a geometric sequence of loading and partial unloading steps from which the variation of permanent penetration with load level is determined. This data is used for specification of two parameters k and m occurring in the plastic hardening curve εp=σ/k1/m, where εp denotes the plastic strain.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Fundamental Technological Research, Warsaw, Poland
References (12)
Show source-provided references
1. Tabor, D., 1951, The hardness of metals, Clarendon Press, Oxford.
2. Hill, R., Storakers, B., and Zdunek, A. B., 1989, “A theoretical study of the Brinell hardness test,” Proc. R. Soc. London, 423, pp. 301–330.10.1098/rspa.1989.0056 ↗
3. Storakers, B., and Larsson, Per-L., 1994, “On Brinell and Boussinesq indentation of creeping solids,” J. Mech. Phys. Solids, 42, pp. 307–332.10.1016/0022-5096(94)90012-4 ↗
4. Biwa, S., and Storakers, B., 1995, “An analysis of fully plastic Brinell indentation,” J. Mech. Phys. Solids, 43, No. 8, pp. 1303–1333.10.1016/0022-5096(95)00031-D ↗
5. Tangena, A. G., and Hurkx, G. A. M., 1986, “The determination of stress-strain curves of thin layers using indentation tests,” ASME J. Eng. Mater. Technol., 108, pp. 230–232.10.1115/1.3225873 ↗
6. Robinson, W. H., and Truman, S. D., 1977, “Stress-strain curve for aluminum from a continuous indentation test,” J. Mater. Sci., 12, pp. 1961–1965.10.1007/BF00561967 ↗
7. Field, J. S., and Swain, M. V., 1995, “Determining the mechanical properties of small volumes of material from submicrometer spherical indentations,” J. Mater. Res., 10, No. 1, pp. 101–102.10.1557/JMR.1995.0101 ↗
8. Adler, T. A., and Dogan, O. N., 1997, “Damage by indentation and single impact of hard particles on a high chromium white cast iron,” Wear, 203-204, pp. 257–266.10.1016/S0043-1648(96)07435-2 ↗
9. Meyer, E. , 1908, “Untersuchen ueber Haertepruefung und Haerte,” Z. Ver. Deutsche Ing., 52, pp. 645–654.
10. Taljat, B., Zacharia, T., and Kosel, F., 1998, “New analytical procedure to determine stress-strain curve from spherical indentation data,” Int. J. Solids Struct., 35, (33), pp. 4411–4426.10.1016/S0020-7683(97)00249-7 ↗
11. Huber, N., and Tsakmakis, Ch., 1998, “A finite element analysis of the effect of hardening rules on the indentation test,” ASME J. Eng. Mater. Technol., 120, pp. 143–148.10.1115/1.2807003 ↗
12. Kucharski, S., and Mro´z, Z., 2000, “Identification of elasto-plastic hardening parameters of metals from spherical indentation test,” Mater. Sci. Eng. (in print).