Upsetting of Cylinders: A Comparison of Two Different Damage Indicators
Source abstract
Abstract
Two damage indicators for ductile failure, as proposed by Hancock–Mackenzie–Gunawardena and Atkins, are compared with experimental results from literature for the upsetting process of cylindrical specimens. It is shown, for this specific example, that quite similar results can be obtained from highly different damage indicators as long as they allow for the accumulation of damage proportional both to the equivalent strain and to the stress triaxiality; the specific mathematical structure of the indicator seems to be of minor importance. These findings give some guidelines for the practical choice of a damage indicator for the simulation of industrial forming processes, and suggest the use of the void growth based Hancock–Mackenzie–Gunawardena indicator even for a certain class of bulk forming processes. In addition, a slight geometry dependence of the failure lines obtained by the Hancock–Mackenzie–Gunawardena indicator is obtained that has so far neither been reported by experimentalists, nor can it be reproduced in a comparable manner by the Atkins indicator. A surprising correlation is found between these results and those obtained from an entirely different micromechanical analysis proposed recently by one of the authors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Mechanics, Montanuniversita¨t Leoben, Leoben, Austria
University of Reading, Reading, United Kingdom
Erich Schmid Institute of Materials Science, Austrian Academy of Science, and Institute of Metal Physics, Montanuniversita¨t Leoben, Leoben, Austria
Christian Doppler Laboratory for Micromechanics of Materials, Institute of Mechanics, Montanuniversita¨t Leoben, Leoben, Austria
Institut Franc¸ais de Me´canique Avance´e, Aubie`re, France
References (24)
Show source-provided references
1. Lemaitre, J., 1992, A Course on Damage Mechanics, Springer-Verlag, Berlin.10.1007/978-3-662-02761-5 ↗
2. Gurson, A. L. , 1977, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Materials,” ASME J. Eng. Mater. Technol., 99, pp. 2–15.10.1115/1.3443401 ↗
3. Zhu, Y. Y., Cescotto, S., and Habraken, A. M., 1995, “Modelling of Fracture Initiation in Metalforming Processes,” Ghosh, S. K., and Predeleanu, M., eds, Materials Processing Defects, Elsevier, Amsterdam, pp. 155–179.10.1016/S0922-5382(05)80011-X ↗
4. Atkins, A. G., 1997, “Fracture Mechanics and Metalforming: Damage Mechanics and the Local Approach of Yesterday and Today,” H. P. Rossmanith, ed., Fracture Research in Retrospect, Balkema, Rotterdam, pp. 327–350.
5. Gouveia, B. P. P. A., Rodrigues, J. M. C., and Martins, P. A. F., 1996, “Fracture Predicting in Bulk Metal Forming,” Int. J. Mech. Sci., 38, pp. 361–372.10.1016/0020-7403(95)00069-0 ↗
6. Wifi, A. S., El-Abbasi, N., and Abdel-Hamid, A., 1995, “A Study of Workability Criteria in Bulk Forming Processes,” Ghosh, S. K., and Predeleanu, M., eds, Materials Processing Defects, Elsevier, Amsterdam, pp. 333–357.10.1016/S0922-5382(05)80022-4 ↗
7. Oyane, M. , 1972, “Criteria of Ductile Fracture Strain,” Bull. JSME, 15, pp. 1507–1513.10.1299/jsme1958.15.1507 ↗
8. Cockroft, M. G., and Latham, D. J., 1968, “Ductility and the Workability of Metals,” J. Inst. Met., 96, pp. 33–39.
9. McClintock, F. A. , 1968, “A Criterion for Ductile Fracture by the Growth of Holes,” ASME J. Appl. Mech., 35, pp. 363–371.10.1115/1.3601204 ↗
10. Rice, J. R., and Tracey, D. M., 1969, “On the Ductile Enlargement of Voids in Triaxial Stress Fields,” J. Mech. Phys. Solids, 17, pp. 201–217.10.1016/0022-5096(69)90033-7 ↗
11. Nadai, A., and Wahl, A. M., 1931, Plasticity, McGraw-Hill, New York.
12. Bridgman, P. W., 1952, Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York.
13. Atkins, A. G. , 1981, “Possible Explanation for Unexpected Departures in Hydrostatic Tension-Fracture Strain Relations,” Met. Sci., 15, pp. 81–83.10.1179/msc.1981.15.2.81 ↗
14. Hancock, J. W., and Mackenzie, A. C., 1976, “On the Mechanisms of Ductile Failure in High-Strength Steels Subjected to Multi-Axial Stress-States,” J. Mech. Phys. Solids, 24, pp. 147–169.10.1016/0022-5096(76)90024-7 ↗
15. Gunawardena, S. R., Jansson, S., and Leckie, F. A., 1993, “Modeling of Anisotropic Behavior of Weakly Bonded Fiber Reinforced MMC’s,” Acta Metall. Mater., 41, pp. 3147–3156.10.1016/0956-7151(93)90045-T ↗
16. Kudo, H., and Aoi, K., 1967, “Effect of Compression Test Condition upon Fracturing of a Medium Carbon Steel,” J. Jpn. Soc. Technol. Plasticity, 8, pp. 17–27.
17. Kuhn, H. A., 1988, “Workability Theory and Application in Bulk Forming Processes,” Metals Handbook, Vol. 14, pp. 388–404.
18. Dodd, B., and Bai, Y., 1987, Ductile Fracture and Ductility, Academic Press, London.
19. Thomason, P. F., 1990, Ductile Fracture of Metals, Pergamon Press, Oxford.
20. Wierzbicki, T., and Werner, H., 1998, “Cockroft and Latham Revisited,” Impact & Crashworthiness Laboratory Report Nr. 16, Massachusetts Institute of Technology.
21. Norris, D. M., Reaugh, J. E., Moran, B., and Quin˜ones, D. F., 1978, “A Plastic-Strain, Mean-Stress Criterion for Ductile Fracture,” ASME J. Eng. Mater. Technol., 100, pp. 279–286.10.1115/1.3443491 ↗
22. Fischer, F. D., Kolednik, O., Shan, G. X., and Rammerstorfer, F. G., 1995, “A Note on Calibration of Ductile Failure Damage Indicators,” Int. J. Fract., 73, pp. 345–357.10.1007/BF00027274 ↗
23. Arndt, J., 1997, Experimentelle und rechnerische Untersuchungen zur Scha¨digung von Bausta¨hlen bei duktilem Versagen (Berichte aus dem Institut fu¨r Eisenhu¨ttenkunde der RWTH Aachen Bd. 3/97), Shaker Verlag, Aachen.
24. Ga¨nser, H.-P., 1998, “Free-Surface Ductility in Bulk Forming Processes,” A. S. Khan, ed., Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Proceedings of Plasticity ’99, Neat Press, Fulton, ML, pp. 341–344.