journal article·2004-10-01

Practical Methods for the Design of Sheet Formed Components

Wei Gan, R. H. Wagoner, Kunming Mao, Shane Price, Firooz Rasouli

Publisher page

Abstract

Commercial methods for the mechanical design of part and die shapes often rely on trial-and-error methods applied to either experiments or simulation, as guided by intuition. Academic alternatives based on optimization techniques have had slow acceptance because they require programming access to finite element analysis programs. Two practical design methods were developed for use in conjunction with standard finite element software. The first of these produces a part shape that will exhibit a specified contact area and pressure when in contact with a deformable body. The second procedure produces die shape compensated for springback, to form a specified target part shape. The simplicity and effectiveness of these techniques were illustrated by a case study for the design of a contact heating device. The methods were shown to be robust and efficient, and an automated procedure was implemented to illustrate their practicality for a production environment. Use of these techniques can substantially reduce the cost and lead time required to produce optimal sheet-formed parts while improving performance. Extensions to other design criteria and situations can be envisioned.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, The Ohio State University, 2041 College Road, Columbus, OH 43210-1124

ABAQUS Central Inc., 1440 Innovation Place, West Lafayette, IN 47906-1000

Alabama Research and Development, P.O. Box 55, 152 Metal Samples Road, Munford, AL 36268

Philip Morris USA, RD&E, P.O. Box 26583, Richmond, VA 23261-6583

References (53)

Show source-provided references
1. FE-Simulation of 3-D Sheet Metal Forming Processes in Automotive Industry, 1991, Proceedings of the International Conference With Workshop Held in Zurich, Switzerland in 1991, T. Altan et al., eds., VDI Berichte, Netherlands.
2. NUMISHEET ’93: Proceedings of the 2nd International Conference on Numerical Simulation of 3-D Sheet Metal Forming Processes, 1993, A. Makinouchi, E. Nakamachi, E. Onate, and R. H. Wagoner, eds., The Institute of Physical and Chemical Research.
3. NUMISHEET ’96: Proceedings of the 3rd International Conference on Numerical Simulation of 3-D Sheet Forming Processes, 1996, J. K. Lee, G. L. Kinzel, and R. H. Wagoner, eds., The Ohio State University.
4. NUMISHEET ’99: Proceedings of the 4th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, 1999, J. C. Gelin and P. Picart, eds., Besanscon, France.
5. NUMISHEET ’02: Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, 2002, D. Y. Yang, S. I. Oh, H. Huh, and Y. H. Kim, eds., Jeju Island, Korea.
6. Eary, D. F. and Reed, E. A., 1974, Techniques of Pressworking Sheet Metal, 2nd ed., Prentice-Hall Inc.
7. Kang, C. G., Son, Y. I., and Youn, S. W., 2001, “Experimental Investigation of Semi-Solid Casting and Die Design by Thermal Fluid-solidification Analysis,” J. Mater. Process. Technol., 113(1–3), pp. 251–256.10.1016/S0924-0136(01)00707-5 ↗
8. Pilani, R., Narasimhan, K., Maiti, S. K. et al., 2000, “A Hybrid Intelligent Systems Approach for Die Design in Sheet Metal Forming,” Int. J. Adv. Manuf. Tech., 16(5), pp. 370–375.10.1007/s001700050168 ↗
9. Santos, A. D., Duarte, J. F., Reis, A. et al., 2001, “The Use of Finite Element Simulation for Optimization of Metal Forming and Tool Design,” J. Mater. Process. Technol., 119(1–3), pp. 152–157.10.1016/S0924-0136(01)00953-0 ↗
10. Esche, S. K., Khamitkar, S., Kinzel, G. L. et al., 1996, “Process and Die Design for Multi-step Forming of Round Parts from Sheet Metal,” J. Mater. Process. Technol., 59(1–2), pp. 24–33.10.1016/0924-0136(96)02283-2 ↗
11. Makinouchi, A., and Kawka, M., 1994, “Process Simulation in Sheet Metal Forming,” J. Mater. Process. Technol., 46(3–4), pp. 291–307.10.1016/0924-0136(94)90117-1 ↗
12. Givoli, D., and Demchenko, T., 2000, “A Boundary-Perturbation Finite Element Approach for Shape Optimization,” Int. J. Numer. Methods Eng., 47(4), pp. 801–819.10.1002/(SICI)1097-0207(20000210)47:4<801::AID-NME798>3.0.CO;2-P ↗
13. Bendsoe M. P., 1995, Optimization of Structural Topology; Shape and Material, Springer, Berlin.10.1007/978-3-662-03115-5 ↗
14. Newman, J. C., Taylor, A. C., Barnwell, R. W. et al., 1999, “Overview of Sensitivity Analysis and Shape Optimization for Complex Aerodynamic Configurations,” J. Aircr., 36(1), pp. 87–96.10.2514/2.2416 ↗
15. Ding, Y. L. , 1986, “Shape Optimization of Structures—A Literature Survey,” Comput. Struct., 24(6), pp. 985–1004.10.1016/0045-7949(86)90307-X ↗
16. Hsu, Y. L. , 1994, “A Review of Structural Shape Optimization,” Comput Ind., 25(1), pp. 3–13.10.1016/0166-3615(94)90028-0 ↗
17. Phan, A. V., Mukherjee, S., and Mayer, J. R. R., 1998, “Stresses, Stress Sensitivities and Shape Optimization in Two-Dimensional Linear Elasticity by the Boundary Contour Method,” Int. J. Numer. Methods Eng., 42, pp. 1391–1407.10.1002/(SICI)1097-0207(19980830)42:8<1391::AID-NME421>3.3.CO;2-M ↗
18. Yamazaki, K., and Shibuya, K., 1998, “Sensitivity Analysis of Nonlinear Material and Its Application to Shape Optimization,” AIAA J., 36, pp. 1113–1115.10.2514/3.13941 ↗
19. Le Riche, R., and Cailletaud, G., 1998, “A Mixed Evolutionary/Heuristic Approach to Shape Optimization,” Int. J. Numer. Methods Eng., 41, pp. 1463–1484.10.1002/(SICI)1097-0207(19980430)41:8<1463::AID-NME346>3.0.CO;2-O ↗
20. Oral, S., and Darendeliler, H., 1997, “The Optimum Die Profile for the Cylindrical Bending of Plates,” J. Mater. Process. Technol., 70(1–3), pp. 151–155.10.1016/S0924-0136(97)80800-X ↗
21. Kim, N. H., Choi, K. K., and Chen, J. S., 2001, “Die Shape Design Optimization of Sheet Metal Stamping Process Using Meshfree Method,” Int. J. Numer. Methods Eng., 51(12), pp. 1385–1405.10.1002/nme.181 ↗
22. Ghouati, O., Joannic, D., and Gelin, J. C., 1998, “Optimization of Process Parameters for the Control of Springback in Deep Drawing,” Numiform ’98, Netherlands, pp. 819–824.
23. Chou, I., and Hung, C., 1999, “Finite Element Analysis and Optimization on Springback Reduction,” Int. J. Mach. Tools Manuf., 39, pp. 517–536.10.1016/S0890-6955(98)00031-5 ↗
24. Li, G. Y., Tan, M. J., and Liew, K. M., 1999, “Springback Analysis for Sheet Forming Processes by Explicit Finite Element Method in Conjunction With the Orthogonal Regression Analysis,” Int. J. Solids Struct., 36(30), pp. 4653–4668.10.1016/S0020-7683(98)00227-3 ↗
25. ABAQUS Standard 5.8, 2004, Hibbitt, Karlsson & Sorensen, Inc., 1080 Main Street, Pawtucket, RI.
26. Haug, E. J., and Kwak, B. M., 1978, “Contact Stress Minimization by Contour Design,” Int. J. Numer. Methods Eng., 12, pp. 917–930.10.1002/nme.1620120604 ↗
27. Li, W., Li, Q., Steven, G. P., and Xie, Y. M., 2003, “An Evolutionary Shape Optimization Procedure for Contact Problems in Mechanical Designs,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 217, pp. 435–446.10.1243/095440603321509711 ↗
28. Hilding, D., Torstenfelt, B., and Klarbring, A., 2001, “A Computational Methodology for Shape Optimization of Structures in Frictionless Contact,” Comput. Methods Appl. Mech. Eng., 190, pp. 4043–4060.10.1016/S0045-7825(00)00310-8 ↗
29. Karafillis, A. P., and Boyce, M. C., 1992, “Tooling Design in Sheet Metal Forming Using Springback Calculations,” Int. J. Mech. Sci., 34, pp. 113–131.10.1016/0020-7403(92)90077-T ↗
30. Karafillis, A. P., and Boyce, M. C., 1992, “Tooling Design Accommodating Springback Errors,” J. Mater. Process. Technol., 32, pp. 499–508.10.1016/0924-0136(92)90206-8 ↗
31. Karafillis, A. P., and Boyce, M. C., 1996, “Tooling and Binder Design for Sheet Metal Forming Processes Compensating Springback Error,” Int. J. Mach. Tools Manuf., 36, pp. 503–526.10.1016/0890-6955(95)00023-2 ↗
32. Gan, W., and Wagoner, R. H., 2004, “Die Design Method for Springback,” Int. J. Mech. Sci., accepted for publication.10.1016/j.ijmecsci.2004.06.006 ↗
33. Karafillis, A. P., 1994, “Tooling Design for Three-Dimensional Sheet Metal Forming Using Finite Element Analysis,” Ph.D. thesis, MIT.
34. Hajaligol, M. R., Deevi, S. C., Sikka, V. K. et al., 1998, “A Thermomechanical Process to Make Iron Aluminide (FeAl) Sheet,” Mater. Sci. Eng., A, 258(1–2), pp. 249–257.10.1016/S0921-5093(98)00941-1 ↗
35. Deevi, S. C., and Swindeman, R. W., 1998, “Yielding, Hardening and Creep Behavior of Iron Aluminides,” Mater. Sci. Eng., A, 258(1–2), 203–210.10.1016/S0921-5093(98)00935-6 ↗
36. Deevi, S. C. , 2000, “Powder Processing of FeAl Sheets by Roll Compaction,” Intermetallics, 8(5–6), 679–685.10.1016/S0966-9795(99)00129-6 ↗
37. Stoloff, N. S., Liu, C. T., and Deevi, S. C., 2000, “Emerging Applications of Intermetallics,” Intermetallics, 8(9–11), 1313–1320.10.1016/S0966-9795(00)00077-7 ↗
38. Stoloff, N. S. , 1998, “Iron Aluminides: Present Status and Future Prospects,” Mater. Sci. Eng., A, 258(1–2), 1–14.10.1016/S0921-5093(98)00909-5 ↗
39. ABAQUS Standard 5.8 Manual, 1998, Element B21, ABAQUS, Inc. Pawtucket, RI. pp. 15.8.3-1.
40. Li, K. P., Carden, W. P., and Wagoner, R. H., 2002, “Simulation of Springback,” Int. J. Mech. Sci., 44, pp. 103–122.10.1016/S0020-7403(01)00083-2 ↗
41. Wagoner, R. H., “Sheet Springback,” chpt. in Continuum Scale Simulation of Engineering Materials, D. Raabe et al., eds., Wiley.
42. Geng, L. M., and Wagoner, R. H., 2002, “Role of Plastic Anisotropy and Its Evolution on Springback,” Int. J. Mech. Sci., 44, pp. 123–148.10.1016/S0020-7403(01)00085-6 ↗
43. Carden, W. D., Geng, L. M., Matlock, D. K., and Wagoner, R. H., 2002, “Measurement of Springback,” Int. J. Mech. Sci., 44, pp. 79–101.10.1016/S0020-7403(01)00082-0 ↗
44. Wagoner, R. H., Carden, W. D., Carden, W. P., and Matlock, D. K., 1997, “Springback after Drawing and Bending of Metal Sheets,” Proc. IPMM ’97-Intelligent Processing and Manufacturing of Materials, T. Chandra, S. R. Leclair, J. A. Meech, B. Verma, M. Smith, and B. Balachandran, eds., University of Wollongong, 1, pp. 1–10.
45. Sachs, G., 1951, Principles and Methods of Sheet Metal Fabricating, Reinhold Publishing Corp., New York.
46. Wilson, F. W., 1955, Die Design Handbook, First Edition, McGraw-Hill, New York.
47. Gardiner, F. J. , 1957, “The Springback of Metals,” Trans. ASME, 79, pp. 1–9.10.1115/1.4012908 ↗
48. Schroeder, W. , 1943, “Mechanics of Sheet-Metal Bending,” Trans. ASME, 65, pp. 817–827.10.1115/1.4018935 ↗
49. Smith D. A., 1990, Die Design Handbook, Third Edition, Society of Manufacturing Engineers.
50. Suchy, I., 1997, Handbook of Die Design, McGraw-Hill, New York.
51. Sanchez, L., Robertson, R. D., and Gerdeen, J. C., 1996, “Springback of Sheet Metal Bent to Small Radius/Thickness Ratios,” SAE Paper 960595, Warrendale, PA, Society of Automotive Engineers.10.4271/960595 ↗
52. Model FX10K, Wire EDM, Mitsubishi, MC Machinery Systems, Inc., Wood Dale, Illinois, USA.
53. Model QC-10SA, Laser Profiler, Quest Integrated, Inc., Kent, Washington, USA.